dan
/
liminix
1
0
Fork 5
Code Issues 3 Pull Requests 2 Projects Releases Wiki Activity

blah

module-based-network
Daniel Barlow 2023-03-08 21:00:12 +00:00
parent 95e14b5c05
commit 2318c54037
1 changed files with 16 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
THOUGHTS.txt
View File

@ -1008,12 +1008,12 @@ a bundle of addresses and therefore we can't see what any of them are
Tue Mar 7 22:05:44 GMT 2023
[phase 1]
1) gl-ar750, why do we get "ag71xx 19000000.eth: invalid MAC address, using random address"
18) gl-mt300a what's left?
19) gl-mt300n-v2 what works?
20) publish the manual using CI
30) document flashing process
31) go through all the other unexpected dmesg and triage
31) go through all the unexpected dmesg and triage
25) ntp or some other accurate time source
[phase 1.5]
8) get ipv6 address from pppoe
@ -1021,7 +1021,7 @@ Tue Mar 7 22:05:44 GMT 2023
10) support dhcp6 in dnsmasq, and advertise prefix on lan
11) firewalling and nat - default deny or zero trust?
7) upgrade ppp to something with an ipv6-up-script option, move ppp and pppoe derivations into their own files
31) set up iperf and do some performance measurement
32) set up iperf and do some performance measurement
[phase 2]
3) document services so I can remember how they work. Refer back to Oct 18 for notes that no longer make sense
@ -1043,3 +1043,16 @@ dmesg lines to investigate for gl-mt300a:
[ 17.686561] ieee80211 phy0: rt2800_wait_bbp_rf_ready: Error - BBP/RF register access failed, aborting
[ 17.696025] ieee80211 phy0: rt2800_loft_iq_calibration: Warning - RF RX busy in LOFT IQ calibration
[ 17.875147] ieee80211 phy0: rt2800_rxiq_calibration: Warning - Timeout waiting for MAC status in RXIQ calibration
for gl-ar750:
[ 0.000000] Unknown kernel command line parameters "earlyprintk=serial,ttyS0", will be passed to user space.
[ 0.416679] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
[ 0.825495] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe.
[ 1.632700] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[ 1.639824] pci_bus 0000:00: root bus resource [io 0x0000]
[ 1.645601] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 32.032326] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
[ 36.627844] ath10k_pci 0000:00:00.0: failed to receive initialized event from target: 00000000
also we need to check our wireless country code