From 2318c5403743461ee28fccf386d9e2be0df0db79 Mon Sep 17 00:00:00 2001 From: Daniel Barlow Date: Wed, 8 Mar 2023 21:00:12 +0000 Subject: [PATCH] blah --- THOUGHTS.txt | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/THOUGHTS.txt b/THOUGHTS.txt index cd9caf1..5d12283 100644 --- a/THOUGHTS.txt +++ b/THOUGHTS.txt @@ -1008,12 +1008,12 @@ a bundle of addresses and therefore we can't see what any of them are Tue Mar 7 22:05:44 GMT 2023 [phase 1] -1) gl-ar750, why do we get "ag71xx 19000000.eth: invalid MAC address, using random address" 18) gl-mt300a what's left? 19) gl-mt300n-v2 what works? 20) publish the manual using CI 30) document flashing process -31) go through all the other unexpected dmesg and triage +31) go through all the unexpected dmesg and triage +25) ntp or some other accurate time source [phase 1.5] 8) get ipv6 address from pppoe @@ -1021,7 +1021,7 @@ Tue Mar 7 22:05:44 GMT 2023 10) support dhcp6 in dnsmasq, and advertise prefix on lan 11) firewalling and nat - default deny or zero trust? 7) upgrade ppp to something with an ipv6-up-script option, move ppp and pppoe derivations into their own files -31) set up iperf and do some performance measurement +32) set up iperf and do some performance measurement [phase 2] 3) document services so I can remember how they work. Refer back to Oct 18 for notes that no longer make sense @@ -1043,3 +1043,16 @@ dmesg lines to investigate for gl-mt300a: [ 17.686561] ieee80211 phy0: rt2800_wait_bbp_rf_ready: Error - BBP/RF register access failed, aborting [ 17.696025] ieee80211 phy0: rt2800_loft_iq_calibration: Warning - RF RX busy in LOFT IQ calibration [ 17.875147] ieee80211 phy0: rt2800_rxiq_calibration: Warning - Timeout waiting for MAC status in RXIQ calibration + +for gl-ar750: +[ 0.000000] Unknown kernel command line parameters "earlyprintk=serial,ttyS0", will be passed to user space. +[ 0.416679] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions +[ 0.825495] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe. +[ 1.632700] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff] +[ 1.639824] pci_bus 0000:00: root bus resource [io 0x0000] +[ 1.645601] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] +[ 32.032326] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware +[ 36.627844] ath10k_pci 0000:00:00.0: failed to receive initialized event from target: 00000000 + +also we need to check our wireless country code +