From 453baede613641239723b2075c1d9f650788ece9 Mon Sep 17 00:00:00 2001 From: Daniel Barlow Date: Sun, 5 Jan 2025 17:39:37 +0000 Subject: [PATCH] rt3200: add installer compatibility note --- devices/belkin-rt3200/default.nix | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/devices/belkin-rt3200/default.nix b/devices/belkin-rt3200/default.nix index bf74b0c..c3321ed 100644 --- a/devices/belkin-rt3200/default.nix +++ b/devices/belkin-rt3200/default.nix @@ -7,12 +7,6 @@ and is mostly feature-complete in Liminix but as of Dec 2024 has seen very little actual use. - .. note:: The factory flash image contains ECC errors that make it - incompatible with Liminix: use the `OpenWrt - UBI Installer `_ to - rewrite the partition layout before you can use - Liminix with it - Hardware summary ================ @@ -38,9 +32,16 @@ To prepare the device for Liminix you first need to use the `OpenWrt UBI Installer `_ image to - rewrite the flash layout. You can do this in one of two ways: + rewrite the flash layout. As of Jan 2025 there are two versions + of the installer available: the release version 1.0.2 and the + pre-release 1.1.3 and for Liminix you nee the pre-relese. + The release version of the installer creates UBI volumes + according to an older layout that is not compatible with + the Linux 6.6.67 kernel used in Liminix. + + You can run the installer in one of two ways: either follow the instructions to do it through the vendor web - interface, or you can drop to U-boot and use TFTP + interface, or you can drop to U-Boot and use TFTP .. code-block:: console