pull/2/head
Daniel Barlow 2023-11-26 22:43:31 +00:00
parent 31a2969972
commit b036a161f5
1 changed files with 63 additions and 0 deletions

View File

@ -3155,6 +3155,9 @@ Turris TODO
- see if network works (eth[012], which is which?)
- wireless drivers
[DONE] ath9k and ath10k, it's like old times
https://docs.turris.cz/hw/omnia/omnia/#turris-omnia-wi-fi-6
(note: other variant of the device has a MT7915AN, should we add
support for that as well?)
- [DONE] feed the watchdog
it looks like compiling watchdog support is sufficient to stop the
@ -3192,3 +3195,63 @@ Turris TODO
- iperf and tuning
- wlan country code
- create an l2tp configuration
Sun Nov 26 15:37:07 GMT 2023
hatching a plan ... we could do "predictable" network interfaces like this:
. add a devpath attr to network/link.nix
. get the kernel-issued name from "/sys${devpath}/net"
. use ip link set ${oldname} name ${newname}
if we had the full iproute2 thng we could keep the old name as well:
# ip link property add dev wan altname eth1
maybe we could do this with lua/netlink? no support in there currently
for RTM_NEWLINKPROP though
Maybe we'll skip doing the altname. The attraction of it is that it
means the existing name isn't removed, so there's no possibility of a
race.
The kernel will allocate eth0 when asked for eth%d and there is no
eth0. This might be the case where eth0 previously existed but it
just got renamed to lan
Sun Nov 26 21:20:23 GMT 2023
The wrinkle here is ifwait: using netlink we can't wait for an
interface by devpath but have to do it by name - which is a problem if
the interface is not yet present, because there won't be a devpath
in which to look up the name until it is.
So we need a new flow
- wait for devpath to exist
- get the ifindex (which shouldn't change, even if the name does)
- churn rtnetlink messages for that index
We don't want to poll the sysfs file, but we can check it whenever
we get a netlink message
Sun Nov 26 22:33:16 GMT 2023
There is no way to refer to the hardware device for a bridge interface
by sysfs path because it has none. This is probably true of other
virtual devices as well.
ls: cannot access '/sys/class/net/vbridge0/device': No such file or directory
Also, there is no way to refer to the _netdevice_ of a hardware
interface without also knowing its default name, which doesn't help us
if enumeration changes
ls /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/net/
enp1s0
So we should only be specifying devices by devpath if they're
hardware devices discovered by the kernel, not synthetic devices (that
we pick the name of anyway).
So maybe we don't need to rewrite ifwait, we just do it after renaming
the device