Daniel Barlow
4ae1edbce7
first boot on armv7 / Turris Omnia
2023-10-29 11:51:49 +00:00
Daniel Barlow
1a5efff3ae
in uimage FIT, honour ${arch}
2023-10-29 11:50:23 +00:00
Daniel Barlow
8772e64b94
extract NETDEVICES kconfig to kernel.nix module
2023-10-29 11:49:03 +00:00
Daniel Barlow
e6ef4f78bb
"ubimage" module contains ubifs image + instructions
...
Presently either you run this from U-Boot or you figure out for
yourself how to kexecboot into a recovery system :-)
2023-10-21 23:20:53 +01:00
Daniel Barlow
d2f517a4e9
preinit.c: reindent
2023-10-19 21:02:18 +01:00
Daniel Barlow
0f38ee0e9c
remove PREINIT_USE_LIBC option as it is now the only option
2023-10-19 18:59:02 +01:00
Daniel Barlow
61dc5beca8
preinit: parse rootfstype from kernel command line
2023-10-19 18:56:09 +01:00
Daniel Barlow
f3225c2bd5
delete dup outputs.systemConfiguration
...
perhaps this should go into initramfs.nix not jffs2.nix
2023-10-19 10:09:08 +01:00
Daniel Barlow
8798ee9830
partial fix for timeout handling
...
1) "Unknown transfer id" message was because the local variable "tid"
is not a transfer id, it is a sequence number - so the check was
actually comparing expected vs actual acknowledged sequence number,
not TID. It's still a problem if we get the wrong one, but it
indicates a lost packet (so we should resend) not a packet that was
sent from somewhere else.
2) if the ACK packet has not been received, our retry should involve
_resending_ it, not just trying to wait for it again.
3) I have removed the timeout condition for terminating the resend
loop, because in practice (assuming both ends have the same timeout
setting) all it did was ensure that the loop only ran once. The
timeout is supposed to regulate how long we wait for before retrying
(it doesn't do this, we wait indefinitely), not how long we wait for
before giving up.
2023-10-18 23:35:23 +01:00
Daniel Barlow
629914f65e
initial support for ubifs
2023-10-16 19:55:17 +01:00
Daniel Barlow
0693cf23d8
preinit: improve error logging for fork_exec
2023-10-12 19:00:57 +01:00
Daniel Barlow
c341eb46b6
use hostPlatform.linuxArch in kernel derivation
2023-10-12 18:59:45 +01:00
Daniel Barlow
1a369ff3bf
preinit: remove no-longer-used mips assembly
2023-10-12 18:57:54 +01:00
Daniel Barlow
364c5faf9e
tftpboot: fix errors in phram partition size calc
2023-10-10 20:26:27 +01:00
Daniel Barlow
80a09a9a9b
rt3200: move the entryPoint
2023-10-10 20:25:42 +01:00
Daniel Barlow
3518e2ecca
Merge branch 'hark-how-all-the-belkin-rings'
2023-10-09 19:56:48 +01:00
Daniel Barlow
fc2eb6ee4d
rt3200 mumble
2023-10-09 19:56:22 +01:00
Daniel Barlow
bd20f3e419
uimage: make fit optional
2023-10-09 19:47:57 +01:00
Daniel Barlow
f62ad0e1d7
use "tftpboot" instead of "tftp" in u-boot commands
...
openwrt's u-boot installation doesn't accept the short form
2023-10-09 19:47:57 +01:00
Daniel Barlow
ed792e0dc0
rt3200: swap wireless driver load order
...
mt7515e loads first, so that wlan0 is 2.4GHz
mt7515e loads after, so that 5GHz gets wlan1
2023-10-09 19:47:57 +01:00
Daniel Barlow
d025c33d30
rt3200: enable flash/mtd
2023-10-09 19:47:57 +01:00
Daniel Barlow
a755c9c3c5
delete some inapplicable kconfig
2023-10-09 19:47:57 +01:00
Daniel Barlow
fdf74fa06b
add mt7915, 7615 wifi modules
...
7915 won't work until we have working MTD, because it needs to
read calibration data from flash
2023-10-09 19:47:57 +01:00
Daniel Barlow
b8dea2ed34
rt3200: add DSA
...
this creates a bunch of network interfaces {lan[1234],wan}@eth0
2023-10-09 19:47:57 +01:00
Daniel Barlow
c18f07f02f
aarch64: make tftpboot work
...
- patch dtb to add reserved-memory stanza for the phram device to use
(aarch64 does not accept memmap= command line option)
- patch phram driver to use memremap() instead of ioremap() as
ioremap can't be used for system ram on arm devices
2023-10-09 19:47:57 +01:00
Daniel Barlow
1c4412a1f4
rt3200: enable serial console
2023-10-09 19:47:57 +01:00
Daniel Barlow
dbc16edf96
don't use ttyAMA0 console on all aarch64, just qemu
2023-10-09 19:47:57 +01:00
Daniel Barlow
528d619d76
WIP kernel config for belkin rt3200
2023-10-09 19:47:57 +01:00
Daniel Barlow
269e972970
use FIT images not appended DTB for aarch64 uimage
2023-10-07 22:52:09 +01:00
Daniel Barlow
2a5669c2cd
enable openwrt mediatek family patches
2023-10-07 22:42:31 +01:00
Daniel Barlow
4df248323c
use MTD_SPI_NOR_USE_4K_SECTORS only on MIPS
2023-10-07 22:41:15 +01:00
Daniel Barlow
b01840fa7f
add support for mt7915, mt7615 in mac80211 package
...
mt7915 additionally requires working MTD, so that it can
read calibration data from flash
2023-10-07 22:29:38 +01:00
Daniel Barlow
a896c4e31c
rename wlan services for devices with > 1 radio
...
let's standardise on having 2.4GHz radio be "wlan", and
5GHz as "wlan5"
2023-10-07 22:28:57 +01:00
Daniel Barlow
caf8e85061
remove USE_OF from aarch64
2023-10-02 22:43:13 +01:00
Daniel Barlow
76f03ecf0f
move OF and USE_OF to arch modules
2023-09-30 21:52:13 +01:00
Daniel Barlow
f57997c605
remove explicit MTD_BLKDEVS, is selected by MTD_BLOCK
2023-09-30 21:45:50 +01:00
Daniel Barlow
3c483ebd9a
set PARTITION_ADVANCED only in ramdisk module
2023-09-30 21:29:12 +01:00
Daniel Barlow
a30b658999
remove CMDLINE_PARTITION, we don't need it
...
(at least, I think we don't)
2023-09-30 21:20:29 +01:00
Daniel Barlow
1ec7fcc197
remove MTD_CMDLINE_PARTS from per-device config
...
it's enabled in modules/ramdisk, which is required by
flashimage and tftpboot
2023-09-29 21:00:25 +01:00
Daniel Barlow
f9f934b40c
spell GL.iNet consistently in docs
2023-09-28 23:22:54 +01:00
Daniel Barlow
e3c8ab351e
fix sphinx warning
2023-09-28 12:19:48 +01:00
Daniel Barlow
7e13eda490
add hardware device descriptions to doc
...
most of the text is recycled and follows no particular format
2023-09-28 12:17:30 +01:00
Daniel Barlow
3a2f074199
disable 4k flash erase blocks everywhere
2023-09-27 22:10:17 +01:00
Daniel Barlow
74f4e0a2f3
fiddle with manual layout
2023-09-27 13:44:26 +01:00
Daniel Barlow
9133475103
update tutorial discussion of liminix-rebuild
2023-09-27 11:05:06 +01:00
Daniel Barlow
abd01a7809
apply mtdpslit patch only for openwrt kernel
...
it doesn't apply to mainline because there's no mtdsplit
in mainline
2023-09-26 18:40:22 +01:00
Daniel Barlow
d0c2b3b274
explain the "demo" example
2023-09-26 18:24:40 +01:00
Daniel Barlow
dfe7228b99
fix jffs2 mtd partition splitting on little-endian CPU
2023-09-26 16:43:03 +01:00
Daniel Barlow
ab147abd9b
less padding in firmware.bin
...
we only need to align to erase block size, which may be
less than the 128k previously hard-coded
2023-09-26 16:43:03 +01:00
Daniel Barlow
bca0c9b26b
gl-mt300a use regular-sized flash erase blocks
2023-09-26 16:43:03 +01:00
Daniel Barlow