b306031b7c
don't need fake dts either now we've removed u-boot
2023-09-19 21:14:04 +01:00
f38270a365
reove more unneeded kconfig
2023-09-19 20:40:07 +01:00
8f4d5e51f4
remove unneeded kconfig
2023-09-19 19:08:08 +01:00
2841952245
hacky wip aarch64 boots in qemu
2023-09-19 18:44:09 +01:00
35c7f1643f
change defaultOutput for hardware devices to flashimage
...
if you're using tftpboot you probably know what you're doing
2023-09-17 17:00:45 +01:00
70fb9f86d3
mt300a vlan interface services depend on primary
2023-09-17 17:00:38 +01:00
f7b30939b5
remove service-state when service exits
2023-09-13 22:49:00 +01:00
83092b7b73
add watchdog service
2023-09-02 17:28:40 +01:00
d3dc9752f8
swap qemu network interfaces around
...
lan and wan were backwards, it looks like
2023-09-01 17:54:15 +01:00
92970e8ed0
qemu: use service-based-module for network interfaces
2023-08-31 23:50:42 +01:00
e04ec2e959
move SWCONFIG defn into per-device files
...
it doesn't work on qemu
2023-08-31 23:50:07 +01:00
b094220466
mt300a: use module-based network services for lan/wan
2023-08-31 18:27:07 +01:00
333327be75
make a module for vlan
...
Acked-by: Daniel Barlow <<dan@telent.net>>
2023-08-30 23:26:44 +01:00
efa1919e04
move squashfs kernel options into module
2023-08-30 22:59:28 +01:00
de77635490
move bridge-related kernel config to the module
2023-08-30 17:29:42 +01:00
31f0213b6f
convert network link/address to module-based-service
...
... and make bridge use it.
We also had to convert bridge back into a pair of services.
Downstreams want to depend on the bridge it self being configured
even if not necessarily all the members are up. e.g. don't want
to break ssh on lan if there's a misconfigured wlan device
2023-08-28 22:02:28 +01:00
2e50368bd2
rename config.outputs to config.system.outputs
...
New rules: everything under "config" that isn't actually configuration
(e.g. build products) will in future live in config.system. This is
the first step.
2023-07-13 19:24:59 +01:00
3dd247a719
update arch for gl-ar750
...
not sure this is needed, tbh
2023-06-20 20:11:25 +01:00
19212b1eeb
add funky dd features reqd by ath10k_cal_data
2023-05-30 18:20:42 +01:00
4cfaed7303
specify root device as /dev/mtdblockn
...
the (openwrt?) magic that autodetects it based on mtd labels
won't work with a two-stage boot
2023-04-26 22:16:15 +01:00
2f3b108ef1
tftpboot: set phram erase block size to match hardware
...
this is needed for tftp boot with a jffs2 filesystem
2023-04-23 21:24:37 +01:00
29c7af5892
set qemu flash erase block size
2023-04-10 22:57:51 +01:00
0a2881914b
set erase block size to something that works for jffs2
2023-04-10 22:57:50 +01:00
633a4f8003
move BLK_DEV_INITRD to base.nix
2023-04-10 22:57:50 +01:00
342c87b256
qemu: boot from mtd using mtd2block
...
doesn't make much difference for squashfs but this will make it much
simpler to test jffs2/ubifs
2023-04-04 21:07:02 +01:00
4ea60a6082
watchdog support for mt300n-v2
2023-03-24 17:11:36 +00:00
beb6e260d4
PoC support for hardware watchdog
2023-03-23 13:18:05 +00:00
efd878dc5e
extract common code for patching kernel source fdorm openwrt
2023-03-18 19:17:58 +00:00
ce05f4e44c
extract phram.mtd ramdisk support from tftpboot module
...
also rename tftproot output to tftpboot for consistency
2023-03-18 14:30:10 +00:00
3f11a3c708
gl-ar750 gpio support is required for USB to work
...
_legacy_ gpio sysfs interface is required by the openwrt
ath79 phy usb driver
2023-03-18 14:30:10 +00:00
ad3f241af9
support mt300n-v2 flash
2023-03-10 23:24:05 +00:00
2594239bbc
can't use builtins.fetchurl on hydra?
2023-03-10 18:51:07 +00:00
be06363e4f
new example for rsync/usb backup server
2023-03-10 18:42:32 +00:00
d83bcc643e
add wifi firmware, move things around in ram
...
* at the base address we were using, the filesystem was getting
corrupted presumably because the kernel unpacked into it
* leave a little more space between compressed kernel and
squashfs. this is probably ineffective but also harmless
2023-03-10 00:48:47 +00:00
f50b0627a2
gl-mt300n-v2: initialize switch & define networkInterfaces
...
It booted and mounted rootfs the first time I tried, which
was nice. Wireless doesn't work yet, it needs firmware
2023-03-09 19:30:57 +00:00
f36d8ef1d0
make mt300a flash-ready
2023-03-08 20:35:41 +00:00
85b5edc39d
vlan interfaces depend on parent
2023-03-08 20:34:39 +00:00
d290965711
shuffle kernel config for gl-mt300a
2023-03-07 22:49:33 +00:00
e8d5e4c788
move regulatory.db to wlan module
2023-03-07 21:32:21 +00:00
c046c39613
wlan support for mt300a
2023-03-07 19:11:12 +00:00
e86e9430fc
vlans and mt300a wired network interfaces
2023-03-07 19:10:12 +00:00
38756af1c1
add in_outputs shell function which ensures umask is set
2023-03-03 23:07:03 +00:00
e0ea576674
rename "device" config tree as "hardware"
...
we are also using "device" for "network device" (as in eth0,
wlan0 etc) so this makes it a bit less confusing perhaps
2023-03-03 22:52:33 +00:00
263882cbe4
move dts config option from boot to device
2023-03-03 22:43:44 +00:00
6d191b73ae
add outputs.flashable - flashable firmware.bin
2023-03-02 23:01:26 +00:00
adc198b3af
WIP push to see what passes
2023-03-01 22:24:58 +00:00
259f5c767b
ath10k kernel support and and firmware
...
- some firmware from kvalo repository
- a service to extract calibration data ART partition
- missing kernel symbol to enable PCI support
2023-03-01 21:08:47 +00:00
41ff5a1fe6
move FW_LOADER* config to modules/base
2023-03-01 18:16:01 +00:00
f2e5f65149
add wireless support for hardware devices
...
* gl-ar750 the ath9k works, ath10k is untested
* gl-mt300[an] build but may not boot
2023-02-22 19:17:47 +00:00
751920c8fc
qemu: switch to building wireless as kernel modules
...
This is a hefty change
* add support for kernel backports project
* build wireless stack/drivers as modules from a backported kernel
* create a service to load/unload the modules
2023-02-22 18:41:41 +00:00
