7195cb10ce
add structured config for common pppoe options
2024-07-23 09:31:34 +01:00
3899daee56
create a module for round-robin
2024-07-15 22:37:37 +01:00
b17f623d03
need insmod when we habve kmodloader
2024-07-15 22:35:26 +01:00
df395a4d5d
finish moving pkgs.linimix.callService to config.system
2024-07-15 19:00:08 +01:00
725d8b608f
huawei-cdc-ncm kernel driver -> module
2024-07-14 12:07:28 +01:00
73ae7788b9
rename wwan-related modules/services
...
we only currently support huawei e3372/cdc ncm so let's make that
explicit in the naming
2024-07-14 11:53:45 +01:00
3f8cc24dcc
fix most doc warnings
2024-07-10 23:36:24 +01:00
ac551536da
set cwd before exec xl2tpd
2024-07-08 21:56:26 +01:00
6f908156af
fix dependency between modem-atz and modeswitch
...
for values of "fix" more than slightly reminiscent of "kludge"
2024-07-08 21:55:05 +01:00
07a6eb73cd
set lcp-echo timeout in l2tp
2024-07-08 21:45:54 +01:00
159bfa3057
make xl2tpd quit when the connections close
2024-07-08 21:44:15 +01:00
143137cbc6
pppoe: set lcp echo failure timeout
2024-07-08 21:25:42 +01:00
8d228f2bef
mess with redial
2024-07-08 21:24:44 +01:00
8b6aa2134e
zyxel dual image; restore deleted params
2024-06-30 17:50:45 +01:00
3df1ec76ff
cleanup whitespace and commas
...
* [] is now [ ]
* {} is now { }
* commas in arglists go at end of line not beginning
In short, I ran the whole thing through nixfmt-rfc-style but only
accepted about 30% of its changes. I might grow accustomed to more
of it over time
2024-06-30 17:16:28 +01:00
e94bf62ec1
remove dead code (run deadnix)
2024-06-29 22:59:27 +01:00
d4d8093f97
working l2tp-over-wwan stick example
2024-06-20 10:15:54 +01:00
7c9c801afc
rename isTrigger to restart-on-upgrade
...
we're moving away from "trigger" services to "controller" services,
and "restart-on-upgrade" is the name used by s6-rc
2024-06-16 12:58:06 +01:00
06d28e9b08
dhcpc handle case when env vars are missing
...
the notify-script should continue and signal readiness even if one or
more of the outputs it writes are mssing in the environment
2024-06-15 15:34:49 +01:00
adc84108ad
Revert "wwan gets address from ppp ipcp not dhcp"
...
This reverts commit be13ab23ca
2024-06-15 15:04:33 +01:00
eae99051fa
exec devout in service definition
...
makes little practical difference but saves a process slot
2024-06-15 15:01:57 +01:00
49d1703428
add s6-rc-up-tree: start reverse deps of controlled service
...
When s6-rc stops a service, it also stops everything that
depends on it. but when it starts a service it starts only
that service, so we have to go through the other services
depending on it and figure out if they should be started too.
2024-06-15 14:59:34 +01:00
f898e4dca2
remove debug
2024-06-12 13:03:26 +01:00
5121a8563d
callService: dependencies are services not names
2024-06-12 12:58:57 +01:00
be13ab23ca
wwan gets address from ppp ipcp not dhcp
2024-06-12 12:51:07 +01:00
b15542b668
start correct services at boot
...
- uncontrolled services that are not dependent on a controlled service
- controllers
- _not_ controlled services or any other service that depends on one
2024-06-11 14:04:14 +01:00
6daeaf29a0
flip controller/controlled relationship for wwan services
2024-06-11 14:02:48 +01:00
e6e4665a18
flip dependencies for triggered/controlled services
...
Instead of treating the trigger as the "main" service and the
triggered service as subsidary, now we treat the triggered
service as the service and the trigger as "subsidary". This
needs some special handling when we work out which services
go in the default bundle, but it works better for declaring
dependencies on triggered services because it means the
dependency runs after the triggered service comes up, not
just when the watcher-for-events starts
2024-06-09 22:37:45 +01:00
c8c79fd75a
update all calls to uevent-watch
2024-06-02 20:42:09 +01:00
884d8d194e
wrap uevent-watch in a service
2024-06-02 20:42:09 +01:00
37d7e20582
wwan use uevent-watch to find tty for AT commands
2024-06-01 23:47:20 +01:00
e0bd7aec1e
wwan: hook usb-modeswitch to uevent
2024-05-26 18:03:32 +01:00
898958fa10
make a serviceDefn for wwan
2024-05-22 18:54:49 +01:00
fa0f262706
commentary
2024-05-22 18:54:49 +01:00
71aeb27b2f
add hacky wwan service with hardcoding all over
2024-05-22 18:54:49 +01:00
530b4080c9
create cdc-ncm module
2024-05-22 18:54:49 +01:00
758c7ef657
exec xl2tpd
...
haven't fully worked out why, but without this s6 is unable to stop it.
2024-05-22 18:54:49 +01:00
73225a70b2
add rudimentary l2tp service module
2024-05-22 18:54:49 +01:00
782feaeafa
set default for firewall extraRules
2024-05-03 16:28:53 +01:00
e249f48cff
add deps on {ins,rm}mod and kconfig for firewall module
2024-05-01 23:06:12 +01:00
660ed5df8f
vlan interface services depend on primary
2024-04-28 21:33:36 +01:00
7e4a05bbf8
separate kernel and base modules
...
this is needed for levitate
2024-04-28 12:44:27 +01:00
a4ba5c85e1
alphabetize list in all-modules
2024-04-28 12:42:47 +01:00
1b6a05aec5
make uevent-watch use devout instead of direct netlink
2024-04-27 21:07:25 +01:00
bf0cafffed
start devout alongside mdevd
...
ensure it starts before mdevd-coldplug so it can populate
its database
2024-04-26 20:52:12 +01:00
cdb23b147c
convert anoia.fs to use lualinux
2024-04-25 21:14:37 +01:00
771585546d
import expect= where previously it was copy-pasted
2024-04-20 15:09:50 +01:00
19ad6cd278
watchdog: put s6 pkg on $PATH for s6-svstat
2024-04-17 13:01:10 +01:00
00076c7b81
mount service: use uevent-watch
2024-04-17 12:59:13 +01:00
b6a054c588
add mdevd as module
...
following the upstream example, it republishes uevent messages
using multicast group 4 instead of group 2 as used by udev.
2024-04-14 21:59:23 +01:00
