THOUGHTS.txt

@@ -6634,39 +6634,3 @@ Read 7491584 bytes from volume recovery to 0000000048000000
    Using 'config-1' configuration
    Trying 'kernel-1' kernel subimage
      Description:  ARM64 OpenWrt Linux-6.6.45
-
-Sun Dec 22 17:39:56 GMT 2024
-
-From the output above it looks like the device I have plugged in has
-an openwrt "recovery" image but not a "production" image
-
-It also looks like it will be quite hard work to persuade it to boot
-from usb or anything. It doesn't have any of the extlinux stuff
-but it does have uefi for what that's worth
-
-default boot_production command reads a ubi volume called 'fit' and
-calls bootm on what it finds
-
-we could define boot_production to ubifsmount liminix; ubifs load
-<addr> <filename> (which is a fit) and bootm it. *presumably* we could
-do this from the openwrt recovery image
-
-but could we install the whole system using said recovery image?  I
-expect we could do, it only requires getting a tarball onto it and
-unpacking it
-
-however, extlinux is not going to be helpful
-(actually it might be a bit, if we ask it to write the fit as
-well as/instead of the individual files)
-
-maybe we need separate concepts of "the filesystem contains
-stuff we need for boot" and "the stuff we need is the stuff
-that extlinux needs"
-
-each bootloader makes an output called bootfiles, and
-the bootablerootdir output copies from bootfiles
-
-Mon Dec 23 18:28:50 GMT 2024
-
-it might be worth moving ubi option decls into the hardware module, if
-they're hardware-dependent

devices/belkin-rt3200/default.nix

@@ -79,6 +79,11 @@
       ];
       config = {
     kernel = {
+      src = pkgs.pkgsBuildBuild.fetchurl {
+        name = "linux.tar.gz";
+        url = "https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.15.137.tar.gz";
+        hash = "sha256-PkdzUKZ0IpBiWe/RS70J76JKnBFzRblWcKlaIFNxnHQ=";
+      };
       extraPatchPhase = ''
           ${pkgs.openwrt.applyPatches.mediatek}
       '';

devices/families/qemu.nix

@@ -5,6 +5,11 @@
   ];
   config = {
     kernel = {
+      src = pkgs.pkgsBuildBuild.fetchurl {
+        name = "linux.tar.gz";
+        url = "https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.15.137.tar.gz";
+        hash = "sha256-PkdzUKZ0IpBiWe/RS70J76JKnBFzRblWcKlaIFNxnHQ=";
+      };
       config = {
         MTD = "y";
         MTD_BLOCK = "y";

devices/gl-ar750/default.nix

@@ -161,6 +161,12 @@
         appendDTB = true;
       };
       kernel = {
+        src = pkgs.pkgsBuildBuild.fetchurl {
+          name = "linux.tar.gz";
+          url = "https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.15.137.tar.gz";
+          hash = "sha256-PkdzUKZ0IpBiWe/RS70J76JKnBFzRblWcKlaIFNxnHQ=";
+        };
+
         # Mainline linux 5.19 doesn't have device-tree support for
         # this device or even for the SoC, so we use the extensive
         # OpenWrt kernel patches

devices/gl-mt300a/default.nix

@@ -114,6 +114,11 @@
      };
 
       kernel = {
+        src = pkgs.fetchurl {
+          name = "linux.tar.gz";
+          url = "https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.15.137.tar.gz";
+          hash = "sha256-PkdzUKZ0IpBiWe/RS70J76JKnBFzRblWcKlaIFNxnHQ=";
+        };
         extraPatchPhase = ''
           ${openwrt.applyPatches.ramips}
           ${openwrt.applyPatches.rt2x00}

devices/gl-mt300n-v2/default.nix

@@ -125,6 +125,11 @@
       };
 
       kernel = {
+        src = pkgs.fetchurl {
+          name = "linux.tar.gz";
+          url = "https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.15.137.tar.gz";
+          hash = "sha256-PkdzUKZ0IpBiWe/RS70J76JKnBFzRblWcKlaIFNxnHQ=";
+        };
         extraPatchPhase = ''
           ${openwrt.applyPatches.ramips}
         '';

devices/tp-archer-ax23/default.nix

@@ -50,6 +50,11 @@
       ];
       config = {
         kernel = {
+          src = pkgs.pkgsBuildBuild.fetchurl {
+            name = "linux.tar.gz";
+            url = "https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.15.137.tar.gz";
+            hash = "sha256-PkdzUKZ0IpBiWe/RS70J76JKnBFzRblWcKlaIFNxnHQ=";
+          };
           extraPatchPhase = ''
             ${pkgs.openwrt.applyPatches.ramips}
           '';

devices/zyxel-nwa50ax/default.nix

@@ -250,8 +250,14 @@
       #  IMAGE/ramboot-factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi
 
       kernel = {
+        src = pkgs.fetchurl {
+          name = "linux.tar.gz";
+          url = "https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.15.137.tar.gz";
+          hash = "sha256-PkdzUKZ0IpBiWe/RS70J76JKnBFzRblWcKlaIFNxnHQ=";
+        };
         extraPatchPhase = ''
           ${openwrt.applyPatches.ramips}
+
         '';
         config = {
 

modules/kernel/default.nix

@@ -6,7 +6,7 @@
 { lib, pkgs, config, ...}:
 let
   inherit (lib) mkOption types ;
-  inherit (pkgs) liminix openwrt;
+  inherit (pkgs) liminix;
 
   mergeConditionals = conf : conditions :
     # for each key in conditions, if it is present in conf
@@ -21,8 +21,8 @@ let
 in {
   options = {
     kernel = {
-      src = mkOption { type = types.path; default = openwrt.kernelSrc; } ;
-      version = mkOption { type = types.str; default = openwrt.kernelVersion;} ;
+      src = mkOption { type = types.path; } ;
+      version = mkOption { type = types.str; default = "5.15.137";} ;
       modular = mkOption {
         type = types.bool;
         default = true;

pkgs/openwrt/default.nix

@@ -29,17 +29,6 @@ let
   '';
 in {
   inherit src;
-
-  # The kernel sources typically used with this version of openwrt
-  # You can find this in `include/kernel-5.15` or similar in the
-  # openwrt sources
-  kernelSrc = pkgsBuildBuild.fetchurl {
-    name = "linux.tar.gz";
-    url = "https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.15.137.tar.gz";
-    hash = "sha256-PkdzUKZ0IpBiWe/RS70J76JKnBFzRblWcKlaIFNxnHQ=";
-  };
-  kernelVersion = "5.15.137";
-
   applyPatches.ath79 = doPatch "ath79";
   applyPatches.ramips = doPatch "ramips";
   applyPatches.mediatek = doPatch "mediatek"; # aarch64