liminix

demo.nix (6314B)

---

 # This is an example configuration for a "typical" small office/home
 # router and wifi access point.
 
 # You need to copy it to another filename and change the configuration
 # wherever the text "EDIT" appears - please consult the tutorial
 # documentation for details.
 
 { config, pkgs, ... }:
 let
   inherit (pkgs.liminix.services) bundle oneshot;
   # EDIT: you can pick your preferred RFC1918 address space
   # for NATted connections, if you don't like this one.
   ipv4LocalNet = "10.8.0";
   svc = config.system.service;
 
 in
 rec {
   boot = {
     tftp = {
       freeSpaceBytes = 3 * 1024 * 1024;
       serverip = "10.0.0.1";
       ipaddr = "10.0.0.8";
     };
   };
 
   imports = [
     ../modules/bridge
     ../modules/dhcp6c
     ../modules/dnsmasq
     ../modules/firewall
     ../modules/hostapd
     ../modules/network
     ../modules/ntp
     ../modules/ppp
     ../modules/ssh
     ../modules/vlan
     ../modules/wlan.nix
   ];
   rootfsType = "jffs2";
   hostname = "the-internet"; # EDIT
 
   services.hostap = svc.hostapd.build {
     interface = config.hardware.networkInterfaces.wlan;
     # EDIT: you will want to change the obvious things
     # here to values of your choice
     params = {
       ssid = "the-internet";
       channel = "1";
       country_code = "GB";
       wpa_passphrase = "not a real wifi password";
 
       hw_mode = "g";
       ieee80211n = 1;
       auth_algs = 1; # 1=wpa2, 2=wep, 3=both
       wpa = 2; # 1=wpa, 2=wpa2, 3=both
       wpa_key_mgmt = "WPA-PSK";
       wpa_pairwise = "TKIP CCMP"; # auth for wpa (may not need this?)
       rsn_pairwise = "CCMP"; # auth for wpa2
       wmm_enabled = 1;
     };
   };
 
   services.int = svc.network.address.build {
     interface = svc.bridge.primary.build { ifname = "int"; };
     family = "inet";
     address = "${ipv4LocalNet}.1";
     prefixLength = 16;
   };
 
   services.bridge = svc.bridge.members.build {
     primary = services.int;
     members = with config.hardware.networkInterfaces; [
       wlan
       lan
     ];
   };
 
   services.ntp = svc.ntp.build {
     pools = {
       "pool.ntp.org" = [ "iburst" ];
     };
     makestep = {
       threshold = 1.0;
       limit = 3;
     };
   };
 
   services.sshd = svc.ssh.build { };
 
   users.root = {
     # EDIT: choose a root password and then use
     # "mkpasswd -m sha512crypt" to determine the hash.
     # It should start wirh $6$.
     passwd = "$6$6HG7WALLQQY1LQDE$428cnouMJ7wVmyK9.dF1uWs7t0z9ztgp3MHvN5bbeo0M4Kqg/u2ThjoSHIjCEJQlnVpDOaEKcOjXAlIClHWN21";
     openssh.authorizedKeys.keys = [
       # EDIT: you can add your ssh pubkey here
       # "ssh-rsa AAAAB3NzaC1....H6hKd user@example.com";
     ];
   };
 
   services.dns =
     let
       interface = services.int;
     in
     svc.dnsmasq.build {
       resolvconf = services.resolvconf;
       inherit interface;
       ranges = [
         "${ipv4LocalNet}.10,${ipv4LocalNet}.249"
         # EDIT: ... maybe. In this example we use "ra-stateless",
         # meaning dnsmasq sends router advertisements with the O and A
         # bits set, and provides a stateless DHCP service. The client
         # will use a SLAAC address, and use DHCP for other
         # configuration information.
         # If you didn't understand the preceding sentence then
         # the default is _probably_ fine, but if you need
         # a DHCP-only IPv6 network or some other different
         # configuration, this is the place to change it.
         "::,constructor:$(output ${interface} ifname),ra-stateless"
       ];
       # EDIT: choose a domain name for the DNS names issued for your
       # DHCP-issued hosts
       domain = "lan.example.com";
     };
 
   services.wan = svc.pppoe.build {
     interface = config.hardware.networkInterfaces.wan;
     ppp-options = [
       "debug"
       "+ipv6"
       "noauth"
       # EDIT: change the strings "chap-username"
       # and "chap-secret" to match the username/password
       # provided by your ISP for PPP logins
       "name"
       "chap-username"
       "password"
       "chap-secret"
     ];
   };
 
   services.resolvconf = oneshot rec {
     dependencies = [ services.wan ];
     name = "resolvconf";
     up = ''
       ( in_outputs ${name}
        echo "nameserver $(output ${services.wan} ns1)" > resolv.conf
        echo "nameserver $(output ${services.wan} ns2)" >> resolv.conf
        chmod 0444 resolv.conf
       )
     '';
   };
 
   filesystem =
     let
       inherit (pkgs.pseudofile) dir symlink;
     in
     dir {
       etc = dir {
         "resolv.conf" = symlink "${services.resolvconf}/.outputs/resolv.conf";
       };
     };
 
   services.defaultroute4 = svc.network.route.build {
     via = "$(output ${services.wan} address)";
     target = "default";
     dependencies = [ services.wan ];
   };
 
   services.defaultroute6 = svc.network.route.build {
     via = "$(output ${services.wan} ipv6-peer-address)";
     target = "default";
     interface = services.wan;
   };
 
   services.firewall = svc.firewall.build { };
 
   services.packet_forwarding = svc.network.forward.build { };
 
   # We expect the ISP uses DHCP6 to issue IPv6 addresses. There is a
   # service to request address information in the form of a DHCP
   # lease, and two dependent services that listen for updates to the
   # DHCP address information and update the addresses of the WAN and
   # LAN interfaces respectively.
 
   services.dhcp6c =
     let
       client = svc.dhcp6c.client.build {
         interface = services.wan;
       };
     in
     bundle {
       name = "dhcp6c";
       contents = [
         (svc.dhcp6c.prefix.build {
           # if your ISP provides you a real IPv6 prefix for your local
           # network (usually a /64 or /48 or something in between the
           # two), this service subscribes to that "prefix delegation"
           # information, and uses it to assign an address to the LAN
           # device. dnsmasq will notice this address and use it to
           # form the addresses it hands out to devices on the lan
           inherit client;
           interface = services.int;
         })
         (svc.dhcp6c.address.build {
           # if your ISP provides you a regular global IPv6 address,
           # this service subscribes to that information and assigns
           # the address to the WAN device.
           inherit client;
           interface = services.wan;
         })
       ];
     };
 
   defaultProfile.packages = with pkgs; [ min-collect-garbage ];
 }