liminix

Unnamed repository; edit this file 'description' to name the repository.
Log | Files | Refs | README | LICENSE

ubimage.nix (3897B)

      1 {
      2   config,
      3   pkgs,
      4   lib,
      5   ...
      6 }:
      7 let
      8   inherit (lib) mkOption types;
      9   cfg = config.boot.tftp;
     10   instructions = pkgs.writeText "flash.scr" ''
     11     setenv serverip ${cfg.serverip}
     12     setenv ipaddr ${cfg.ipaddr}
     13     setenv loadaddr ${lib.toHexString cfg.loadAddress}
     14     tftpboot $loadaddr result/rootfs
     15     ubi write $loadaddr liminix $filesize
     16   '';
     17 in
     18 {
     19   options.system.outputs = {
     20     ubimage = mkOption {
     21       type = types.package;
     22       description = ''
     23         ubimage
     24         *******
     25 
     26         This output provides a UBIFS filesystem image and a small U-Boot script
     27         to make the manual installation process very slightly simpler. You will
     28         need a serial connection and a network connection to a TFTP server
     29         containing the filesystem image it creates.
     30 
     31         .. warning:: These steps were tested on a Belkin RT3200 (also known as
     32                      Linksys E8450).  Other devices may be set up differently,
     33                      so use them as inspiration and don't just paste them
     34                      blindly.
     35 
     36         1) determine which MTD device is being used for UBI, and the partition name:
     37 
     38         .. code-block:: console
     39 
     40             uboot>  ubi part
     41             Device 0: ubi0, MTD partition ubi
     42 
     43         In this case the important value is ``ubi0``
     44 
     45         2) list the available volumes and create a new one on which to install Liminix
     46 
     47         .. code-block:: console
     48 
     49             uboot> ubi info l
     50             [ copious output scrolls past ]
     51 
     52         Expect there to be existing volumes and for some or all of them to be
     53         important. Unless you know what you're doing, don't remove anything
     54         whose name suggests it's related to uboot, or any kind of backup or
     55         recovery partition. To see how much space is free:
     56 
     57         .. code-block:: console
     58 
     59             uboot> ubi info
     60             [ ... ]
     61             UBI: available PEBs:             823
     62 
     63         Now we can make our new root volume
     64 
     65         .. code-block:: console
     66 
     67             uboot> ubi create liminix -
     68 
     69         3) transfer the root filesystem from the build system and write it to
     70         the new volume. Paste the contents of :file:`result/flash.scr` one line at a time
     71         into U-Boot:
     72 
     73         .. code-block:: console
     74 
     75             uboot> setenv serverip 10.0.0.1
     76             uboot> setenv ipaddr 10.0.0.8
     77             uboot> setenv loadaddr 4007FF28
     78             uboot> tftpboot $loadaddr result/rootfs
     79             uboot> ubi write $loadaddr liminix $filesize
     80 
     81         Now we have the root filesystem installed on the device. You
     82         can even mount it and poke around using :command:`ubifsmount ubi0:liminix; ubifsls  /`
     83 
     84         4) optional: before you configure the device to boot into Liminix
     85         automatically, you can try booting it by hand to see if it works:
     86 
     87         .. code-block:: console
     88 
     89             uboot> ubifsmount ubi0:liminix
     90             uboot> ubifsload ''${loadaddr} boot/fit
     91             uboot> bootm ''${loadaddr}
     92 
     93         Once you've done this and you're happy with it, reset the device to
     94         return to U-Boot.
     95 
     96         5) Instructions for configuring autoboot are likely to be very
     97         device-dependent and you should consult the Liminix documentation for
     98         your device.  (If you're bringing up a new device, some detective work
     99         may be needed. Try running `printenv` and trace through the flow of
    100         execution from (probably) :command:`$bootcmd` and look for a suitable
    101         variable to change)
    102 
    103         6) Now you can reboot the device into Liminix
    104 
    105         .. code-block:: console
    106 
    107             uboot> reset
    108       '';
    109     };
    110   };
    111 
    112   config.system.outputs.ubimage =
    113     assert config.rootfsType == "ubifs";
    114     let
    115       o = config.system.outputs;
    116     in
    117     pkgs.runCommand "ubimage" { } ''
    118       mkdir $out
    119       cd $out
    120       ln -s ${o.rootfs} rootfs
    121       ln -s ${instructions} flash.scr
    122     '';
    123 }