{ config, pkgs, ... } : let inherit (pkgs.liminix.networking) interface address udhcpc odhcpc route; inherit (pkgs.liminix.services) oneshot longrun bundle target; in rec { imports = [ ./modules/tftpboot.nix ./modules/wlan.nix ]; services.loopback = config.hardware.networkInterfaces.lo; services.dhcpv4 = let iface = interface { type = "hardware"; device = "eth1"; }; in udhcpc iface {}; services.dhcpv6 = let iface = interface { type = "hardware"; device = "eth1"; }; in odhcpc iface { uid = "e7"; }; services.ntp = longrun { name = "ntp"; run = let inherit (services) dhcpv4 dhcpv6; in "${pkgs.ntp}/bin/ntpd $(output ${dhcpv4} ntp_servers) $(output ${dhcpv6} NTP_IP)"; # I don't think it's possible to standardise the file names # generally, as different services have different outputs, but it # would be cool if services that provide an interface could use # the same name as each other. e.g. for anything implementing # addressProvider you might expect (output svc "address") or # (output svc "family") to work. Otherwise switching a network link # from static to dhcp might require reviewing all the downstreams # that refer to it. # Also, services should declare the outputs they provide outputs = []; dependencies = [services.dhcpv4]; }; services.defaultroute4 = route { name = "defautlrote"; via = "$(output ${services.dhcpv4} address)"; target = "default"; dependencies = [ services.dhcpv4 ]; }; services.packet_forwarding = let iface = services.dhcpv4; filename = "/proc/sys/net/ipv4/conf/$(output ${iface} ifname)/forwarding"; in oneshot { name = "let-the-ip-flow"; up = "echo 1 > ${filename}"; down = "echo 0 > ${filename}"; dependencies = [iface]; }; services.default = target { name = "default"; contents = with services; [ loopback ntp defaultroute4 ]; }; boot.tftp = { serverip = "192.168.8.148"; ipaddr = "192.168.8.251"; }; defaultProfile.packages = [ pkgs.hello ] ; }