# This is not part of Liminix per se. This is my "scratchpad" # configuration for the device I'm testing with. # # Parts of it do do things that Liminix eventually needs to do, but # don't look in here for solutions - just for identifying the # problems. { config, pkgs, lib, ... } : let secrets = import ./rotuer-secrets.nix; inherit (pkgs.liminix.services) oneshot longrun bundle; inherit (pkgs) serviceFns; svc = config.system.service; wirelessConfig = { country_code = "GB"; inherit (secrets) wpa_passphrase; auth_algs = 1; # 1=wpa2, 2=wep, 3=both wpa = 2; # 1=wpa, 2=wpa2, 3=both wpa_key_mgmt = "WPA-PSK"; wpa_pairwise = "TKIP CCMP"; # auth for wpa (may not need this?) rsn_pairwise = "CCMP"; # auth for wpa2 wmm_enabled = 1; }; in rec { boot = { tftp = { freeSpaceBytes = 3 * 1024 * 1024; serverip = "10.0.0.1"; ipaddr = "10.0.0.8"; }; }; imports = [ ../modules/wlan.nix ../modules/standard.nix ../modules/network ../modules/ppp ../modules/dnsmasq ../modules/dhcp6c ../modules/firewall ../modules/hostapd ../modules/bridge ../modules/ntp ../modules/ssh ]; rootfsType = "jffs2"; hostname = "rotuer"; services.hostap = svc.hostapd.build { interface = config.hardware.networkInterfaces.wlan_24; params = { ssid = "liminix"; hw_mode="g"; channel = "2"; ieee80211n = 1; } // wirelessConfig; }; services.hostap5 = svc.hostapd.build { interface = config.hardware.networkInterfaces.wlan_5; params = rec { ssid = "liminix_5"; hw_mode="a"; channel = 36; ht_capab = "[HT40+]"; vht_oper_chwidth = 1; vht_oper_centr_freq_seg0_idx = channel + 6; ieee80211ac = 1; } // wirelessConfig; }; services.int = svc.network.address.build { interface = svc.bridge.primary.build { ifname = "int"; }; family = "inet"; address ="10.8.0.1"; prefixLength = 16; }; services.bridge = svc.bridge.members.build { primary = services.int; members = with config.hardware.networkInterfaces; [ wlan_24 wlan_5 lan ]; }; services.ntp = svc.ntp.build { pools = { "pool.ntp.org" = ["iburst"]; }; makestep = { threshold = 1.0; limit = 3; }; }; services.sshd = svc.ssh.build { }; users.root = secrets.root; services.dns = let interface = services.int; in svc.dnsmasq.build { resolvconf = services.resolvconf; inherit interface; ranges = [ "10.8.0.10,10.8.0.240" # ra-stateless: sends router advertisements with the O and A # bits set, and provides a stateless DHCP service. The client # will use a SLAAC address, and use DHCP for other # configuration information. "::,constructor:$(output ${interface} ifname),ra-stateless" ]; # You can add static addresses for the DHCP server here. I'm # not putting my actual MAC addresses in a public git repo ... hosts = { } // lib.optionalAttrs (builtins.pathExists ./static-leases.nix) (import ./static-leases.nix); domain = "fake.liminix.org"; }; services.wan = svc.pppoe.build { interface = config.hardware.networkInterfaces.wan; ppp-options = [ "debug" "+ipv6" "noauth" "name" secrets.l2tp.name "password" secrets.l2tp.password ]; }; services.resolvconf = oneshot rec { dependencies = [ services.wan ]; name = "resolvconf"; up = '' . ${serviceFns} ( in_outputs ${name} echo "nameserver $(output ${services.wan} ns1)" > resolv.conf echo "nameserver $(output ${services.wan} ns2)" >> resolv.conf chmod 0444 resolv.conf ) ''; }; filesystem = let inherit (pkgs.pseudofile) dir symlink; in dir { etc = dir { "resolv.conf" = symlink "${services.resolvconf}/.outputs/resolv.conf"; }; }; services.defaultroute4 = svc.network.route.build { via = "$(output ${services.wan} address)"; target = "default"; dependencies = [ services.wan ]; }; services.defaultroute6 = svc.network.route.build { via = "$(output ${services.wan} ipv6-peer-address)"; target = "default"; interface = services.wan; }; services.firewall = svc.firewall.build { ruleset = import ./demo-firewall.nix; }; services.packet_forwarding = svc.network.forward.build { }; services.dhcp6c = let client = svc.dhcp6c.client.build { interface = services.wan; }; in bundle { name = "dhcp6c"; contents = [ (svc.dhcp6c.prefix.build { inherit client; interface = services.int; }) (svc.dhcp6c.address.build { inherit client; interface = services.wan; }) ]; }; defaultProfile.packages = with pkgs; [ min-collect-garbage ]; }