diff --git a/devices/belkin-rt3200/default.nix b/devices/belkin-rt3200/default.nix
new file mode 100644
index 00000000..6c07084d
--- /dev/null
+++ b/devices/belkin-rt3200/default.nix
@@ -0,0 +1,198 @@
+{
+  description = ''
+    Belkin RT-3200 / Linksys E8450
+    ******************************
+
+    This device is based on a 64 bit Mediatek MT7622 ARM platform,
+    and is "work in progress" in Liminix.
+
+    The factory flash image contains ECC errors that make it incompatible
+    with Liminix: you need to use the `OpenWrt UBI Installer <https://github.com/dangowrt/owrt-ubi-installer>`_ to rewrite the partition layout before
+    you can flash Liminix onto it (or even use it with "tftpboot",
+    if you want the wireless to work).
+
+    - MediaTek MT7622BV (1350MHz)
+    - 128MB NAND flash
+    - 512MB	RAM
+    - b/g/n wireless using MediaTek MT7622BV (MT7615E driver)
+    - a/n/ac/ax wireless using  MediaTek MT7915E
+  '';
+
+  system = {
+    crossSystem = {
+      config = "aarch64-unknown-linux-musl";
+    };
+  };
+
+  module = {pkgs, config, lib, ... }:
+    let firmware = pkgs.stdenv.mkDerivation {
+          name = "wlan-firmware";
+          phases = ["installPhase"];
+          installPhase = ''
+            mkdir $out
+            cp ${pkgs.linux-firmware}/lib/firmware/mediatek/{mt7915,mt7615,mt7622}* $out
+          '';
+        };
+    in {
+    imports = [ ../../modules/arch/aarch64.nix ];
+    kernel = {
+      src = pkgs.pkgsBuildBuild.fetchurl {
+        name = "linux.tar.gz";
+        url = "https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.15.71.tar.gz";
+        hash = "sha256-yhO2cXIeIgUxkSZf/4aAsF11uxyh+UUZu6D1h92vCD8=";
+      };
+      extraPatchPhase = ''
+          ${pkgs.openwrt.applyPatches.mediatek}
+      '';
+      config = {
+        PCI = "y";
+        ARCH_MEDIATEK = "y";
+        # ARM_MEDIATEK_CPUFREQ = "y";
+
+        # needed for "Cannot find regmap for /infracfg@10000000"
+        MFD_SYSCON = "y";
+        MTK_INFRACFG = "y";
+
+        MTK_PMIC_WRAP = "y";
+        MTK_EFUSE="y";
+        # MTK_HSDMA="y";
+        MTK_SCPSYS="y";
+        MTK_SCPSYS_PM_DOMAINS="y";
+        # MTK_THERMAL="y";
+        MTK_TIMER="y";
+
+        COMMON_CLK_MT7622 = "y";
+        COMMON_CLK_MT7622_ETHSYS = "y";
+        COMMON_CLK_MT7622_HIFSYS = "y";
+        COMMON_CLK_MT7622_AUDSYS = "y";
+        PM_CLK="y";
+
+        REGMAP_MMIO = "y";
+        CLKSRC_MMIO = "y";
+        REGMAP = "y";
+
+        MEDIATEK_GE_PHY = "y";
+        # MEDIATEK_MT6577_AUXADC = "y";
+        # MEDIATEK_WATCHDOG = "y";
+        NET_MEDIATEK_SOC = "y";
+        NET_MEDIATEK_SOC_WED = "y";
+        NET_MEDIATEK_STAR_EMAC = "y"; # this enables REGMAP_MMIO
+        NET_VENDOR_MEDIATEK = "y";
+        PCIE_MEDIATEK = "y";
+
+        BLOCK = "y"; # move this to base option
+        NETDEVICES = "y";  # and this probably also
+
+        SPI_MASTER = "y";
+        SPI = "y";
+        SPI_MEM="y";
+        SPI_MTK_NOR="y";
+        SPI_MTK_SNFI = "y";
+
+        MTD = "y";
+        MTD_BLOCK = "y";
+        MTD_RAW_NAND = "y";
+        MTD_NAND_MTK = "y";
+        MTD_NAND_MTK_BMT = "y";      # Bad-block Management Table
+        MTD_NAND_ECC_MEDIATEK= "y";
+        MTD_NAND_ECC_SW_HAMMING= "y";
+        MTD_SPI_NAND= "y";
+        MTD_OF_PARTS = "y";
+        MTD_NAND_CORE= "y";
+        MTD_SPI_NOR= "y";
+        MTD_SPLIT_FIRMWARE= "y";
+        MTD_SPLIT_FIT_FW= "y";
+        MTD_UBI="y";
+        MTD_UBI_BEB_LIMIT="20";
+        MTD_UBI_BLOCK="y";
+        MTD_UBI_WL_THRESHOLD="4096";
+
+        MMC = "y";
+        MMC_BLOCK = "y";
+        MMC_CQHCI = "y";
+        MMC_MTK = "y";
+
+        # Distributed Switch Architecture is needed
+        # to make the ethernet ports visible
+        NET_DSA="y";
+        NET_DSA_MT7530="y";
+        NET_DSA_TAG_MTK="y";
+
+        PSTORE = "y";
+        PSTORE_RAM = "y";
+        PSTORE_CONSOLE = "y";
+        PSTORE_DEFLATE_COMPRESS = "n";
+
+        SERIAL_8250 = "y";
+        SERIAL_8250_CONSOLE = "y";
+        SERIAL_8250_MT6577="y";
+        # SERIAL_8250_NR_UARTS="3";
+        # SERIAL_8250_RUNTIME_UARTS="3";
+        SERIAL_OF_PLATFORM="y";
+      };
+    };
+    boot = {
+      commandLine = [ "console=ttyS0,115200" ];
+      tftp.loadAddress =  "0x4007ff28";
+      imageFormat = "fit";
+    };
+    filesystem =
+      let inherit (pkgs.pseudofile) dir symlink;
+           in
+             dir {
+               lib = dir {
+                 firmware = dir {
+                   mediatek = symlink firmware;
+                 };
+               };
+             };
+
+    hardware =
+      let
+        openwrt = pkgs.openwrt;
+        mac80211 =  pkgs.mac80211.override {
+          drivers = [
+            "mt7615e"
+            "mt7915e"
+          ];
+          klibBuild = config.system.outputs.kernel.modulesupport;
+        };
+      in {
+        defaultOutput = "flashimage";
+        loadAddress = "0x41080000";
+        entryPoint  = "0x41080000";
+        rootDevice = "/dev/mtdblock0";
+        dts = {
+          src = "${openwrt.src}/target/linux/mediatek/dts/mt7622-linksys-e8450.dts";
+          includes =  [
+            "${openwrt.src}/target/linux/mediatek/dts"
+            "${config.system.outputs.kernel.modulesupport}/arch/arm64/boot/dts/mediatek/"
+          ];
+        };
+
+        flash.eraseBlockSize = "65536"; # c.f. pkgs/mips-vm/mips-vm.sh
+        networkInterfaces =
+          let
+            inherit (config.system.service.network) link;
+            inherit (config.system.service) bridge;
+          in rec {
+            wan = link.build { ifname = "wan"; };
+            lan1 = link.build { ifname = "lan1"; };
+            lan2 = link.build { ifname = "lan2"; };
+            lan3 = link.build { ifname = "lan3"; };
+            lan4 = link.build { ifname = "lan4"; };
+            lan = lan3;
+
+            wlan = link.build {
+              ifname = "wlan0";
+              dependencies = [ mac80211 ];
+            };
+            wlan5 = link.build {
+              ifname = "wlan1";
+              dependencies = [ mac80211 ];
+            };
+          };
+      };
+
+  };
+}
diff --git a/devices/qemu-aarch64/default.nix b/devices/qemu-aarch64/default.nix
index c1144aaa..6abab3df 100644
--- a/devices/qemu-aarch64/default.nix
+++ b/devices/qemu-aarch64/default.nix
@@ -42,6 +42,9 @@
         SERIAL_AMBA_PL011_CONSOLE = "y";
       };
     };
+    boot.commandLine = [
+      "console=ttyAMA0,38400"
+    ];
     hardware =
       let
         mac80211 =  pkgs.mac80211.override {
diff --git a/modules/arch/aarch64.nix b/modules/arch/aarch64.nix
index 460c03ef..e1e97025 100644
--- a/modules/arch/aarch64.nix
+++ b/modules/arch/aarch64.nix
@@ -6,14 +6,11 @@
       CPU_BIG_ENDIAN= "n";
       # CMDLINE_FROM_BOOTLOADER availability is conditional
       # on CMDLINE being set to something non-empty
-      CMDLINE="\"console=ttyAMA0\"";
+      CMDLINE="\"empty=false\"";
       CMDLINE_FROM_BOOTLOADER = "y";
 
       OF = "y";
       # USE_OF = "y";
     };
-    boot.commandLine = [
-      "console=ttyAMA0,38400"
-    ];
   };
 }
diff --git a/modules/base.nix b/modules/base.nix
index a39c6893..fb059d25 100644
--- a/modules/base.nix
+++ b/modules/base.nix
@@ -47,6 +47,10 @@ in {
         default = [];
         description = "Kernel command line";
       };
+      imageFormat = mkOption {
+        type = types.enum ["fit" "uimage"];
+        default = "uimage";
+      };
       tftp = {
         loadAddress = mkOption {
           type = types.str;
diff --git a/modules/outputs.nix b/modules/outputs.nix
index 3232d80a..ae92bbf0 100644
--- a/modules/outputs.nix
+++ b/modules/outputs.nix
@@ -78,6 +78,7 @@ in
       uimage = liminix.builders.uimage {
         commandLine = concatStringsSep " " config.boot.commandLine;
         inherit (config.hardware) loadAddress entryPoint;
+        inherit (config.boot) imageFormat;
         inherit kernel;
         inherit dtb;
       };
diff --git a/modules/tftpboot.nix b/modules/tftpboot.nix
index 2034aca5..b011ebd1 100644
--- a/modules/tftpboot.nix
+++ b/modules/tftpboot.nix
@@ -42,27 +42,39 @@ in {
           ln -s ${o.manifest} manifest
           ln -s ${o.kernel.headers} build
           ln -s ${o.uimage} uimage
-          ln -s ${o.boot-scr} boot.scr
+          ln -s ${o.boot-scr}/dtb dtb
+          ln -s ${o.boot-scr}/script boot.scr
        '';
 
       boot-scr =
         let
           inherit (pkgs.lib.trivial) toHexString;
           o = config.system.outputs;
+          cmdline = concatStringsSep " " config.boot.commandLine;
         in
-          pkgs.buildPackages.runCommand "boot-scr" {} ''
+          pkgs.buildPackages.runCommand "boot-scr" { nativeBuildInputs = [ pkgs.pkgsBuildBuild.dtc ];  } ''
             uimageSize=$(($(stat -L -c %s ${o.uimage}) + 0x1000 &(~0xfff)))
-            rootfsStart=0x$(printf %x $((${cfg.loadAddress} + 0x100000 + $uimageSize)))
+            rootfsStart=0x$(printf %x $((${cfg.loadAddress} + 0x100000 + $uimageSize   &(~0xfffff) )))
             rootfsBytes=$(($(stat -L -c %s ${o.rootfs}) + 0x100000 &(~0xfffff)))
+            rootfsMb=$(($rootfsBytes >> 20))
             rootfsBytes=$(($rootfsBytes + ${toString cfg.freeSpaceBytes} ))
-            cmd="mtdparts=phram0:''${rootfsMb}M(rootfs) phram.phram=phram0,''${rootfsStart},''${rootfsBytes},${config.hardware.flash.eraseBlockSize} memmap=''${rootfsBytes}\$''${rootfsStart} root=/dev/mtdblock0";
+            cmd="mtdparts=phram0:''${rootfsMb}M(rootfs) phram.phram=phram0,''${rootfsStart},''${rootfsBytes},${config.hardware.flash.eraseBlockSize} root=/dev/mtdblock0";
 
-            cat > $out << EOF
+            dtbStart=$(printf %x $((${cfg.loadAddress} + $rootfsBytes + 0x100000 + $uimageSize )))
+
+            mkdir $out
+            cat ${o.dtb} > $out/dtb
+            fdtput -p -t s $out/dtb /reserved-memory/phram-rootfs compatible phram
+            fdtput -p -t lx $out/dtb /reserved-memory/phram-rootfs reg 0 $rootfsStart 0 $rootfsBytes
+
+            dtbBytes=$(($(stat -L -c %s $out/dtb) + 0x1000 &(~0xfff)))
+
+            cat > $out/script << EOF
             setenv serverip ${cfg.serverip}
             setenv ipaddr ${cfg.ipaddr}
-            setenv bootargs 'liminix $cmd'
-            tftp 0x$(printf %x ${cfg.loadAddress}) result/uimage ; tftp 0x$(printf %x $rootfsStart) result/rootfs
-            bootm 0x$(printf %x ${cfg.loadAddress})
+            setenv bootargs 'liminix ${cmdline} $cmd'
+            tftpboot 0x$(printf %x ${cfg.loadAddress}) result/uimage ; tftpboot 0x$(printf %x $rootfsStart) result/rootfs ; tftpboot 0x$dtbStart result/dtb
+            bootm 0x$(printf %x ${cfg.loadAddress}) - 0x$dtbStart
             EOF
           '';
     };
diff --git a/pkgs/kernel/default.nix b/pkgs/kernel/default.nix
index d2fec552..b6eb19fb 100644
--- a/pkgs/kernel/default.nix
+++ b/pkgs/kernel/default.nix
@@ -54,6 +54,7 @@ stdenv.mkDerivation rec {
 
   patches = [
     ./cmdline-cookie.patch
+    ./phram-allow-cached-mappings.patch
   ];
 
   # this is here to work around what I think is a bug in nixpkgs
diff --git a/pkgs/kernel/kernel_fdt.its b/pkgs/kernel/kernel_fdt.its
new file mode 100644
index 00000000..9eba3d96
--- /dev/null
+++ b/pkgs/kernel/kernel_fdt.its
@@ -0,0 +1,50 @@
+/dts-v1/;
+
+//  used on aarch64 to provide a U-bootable image that combines
+//  kernel and fdt
+
+/ {
+    description = "Simple image with single Linux kernel and FDT blob";
+    #address-cells = <1>;
+
+    images {
+        kernel {
+            description = "Vanilla Linux kernel";
+            // data = /incbin/("./vmlinux.bin.gz");
+            type = "kernel";
+            arch = "arm64";
+            os = "linux";
+            // compression = "gzip";
+            // load = <00000000>;
+            // entry = <00000000>;
+            hash-1 {
+                    algo = "crc32";
+            };
+            hash-2 {
+                    algo = "sha1";
+            };
+	};
+        fdt-1 {
+            description = "Flattened Device Tree blob";
+            // data = /incbin/("./target.dtb");
+            type = "flat_dt";
+            arch = "arm64";
+            compression = "none";
+            hash-1 {
+                    algo = "crc32";
+            };
+            hash-2 {
+                    algo = "sha1";
+            };
+        };
+    };
+
+    configurations {
+        default = "conf-1";
+        conf-1 {
+            description = "Boot Linux kernel with FDT blob";
+            kernel = "kernel";
+            fdt = "fdt-1";
+        };
+    };
+};
diff --git a/pkgs/kernel/phram-allow-cached-mappings.patch b/pkgs/kernel/phram-allow-cached-mappings.patch
new file mode 100644
index 00000000..070502cd
--- /dev/null
+++ b/pkgs/kernel/phram-allow-cached-mappings.patch
@@ -0,0 +1,47 @@
+From bb7e7aeb3d832059e33b1e76eb85d4680f77abf2 Mon Sep 17 00:00:00 2001
+From: Ben Hutchings <ben@decadent.org.uk>
+Date: Fri, 3 Jun 2016 01:08:36 +0100
+Subject: [PATCH] phram: Use memremap() to allow mapping of system RAM
+
+Using memremap() instead of ioremap() allows mapping a disk image in
+system RAM that has somehow been reserved.  It should fall back
+to ioremap() where necessary.
+
+Entirely untested, and I'm not convinced this is a good idea at all.
+---
+ drivers/mtd/devices/phram.c | 7 ++++---
+ 1 file changed, 4 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
+index 8b66e52ca3cc..0ea254e2ba51 100644
+--- a/drivers/mtd/devices/phram.c
++++ b/drivers/mtd/devices/phram.c
+@@ -88,7 +88,7 @@ static void unregister_devices(void)
+ 
+ 	list_for_each_entry_safe(this, safe, &phram_list, list) {
+ 		mtd_device_unregister(&this->mtd);
+-		iounmap(this->mtd.priv);
++		memunmap(this->mtd.priv);
+ 		kfree(this->mtd.name);
+ 		kfree(this);
+ 	}
+@@ -104,7 +104,8 @@ static int register_device(char *name, phys_addr_t start, size_t len)
+ 		goto out0;
+ 
+ 	ret = -EIO;
+-	new->mtd.priv = ioremap(start, len);
++	new->mtd.priv = memremap(start, len,
++				 MEMREMAP_WB | MEMREMAP_WT | MEMREMAP_WC);
+ 	if (!new->mtd.priv) {
+ 		pr_err("ioremap failed\n");
+ 		goto out1;
+@@ -134,7 +135,7 @@ static int register_device(char *name, phys_addr_t start, size_t len)
+ 	return 0;
+ 
+ out2:
+-	iounmap(new->mtd.priv);
++	memunmap(new->mtd.priv);
+ out1:
+ 	kfree(new);
+ out0:
+
diff --git a/pkgs/kernel/uimage.nix b/pkgs/kernel/uimage.nix
index d0882f88..e6ac6859 100644
--- a/pkgs/kernel/uimage.nix
+++ b/pkgs/kernel/uimage.nix
@@ -7,21 +7,27 @@
 } :
 let
   objcopy = "${stdenv.cc.bintools.targetPrefix}objcopy";
+  arch = stdenv.hostPlatform.linuxArch;
+  stripAndZip = ''
+    ${objcopy} -O binary -R .reginfo -R .notes -R .note -R .comment -R .mdebug -R .note.gnu.build-id -S vmlinux.elf vmlinux.bin
+    rm -f vmlinux.bin.lzma ; lzma -k -z  vmlinux.bin
+  '';
 in {
   kernel
 , commandLine
 , entryPoint
 , extraName ? ""                # e.g. socFamily
 , loadAddress
+, imageFormat
 , dtb ? null
-} :
-stdenv.mkDerivation {
+} : stdenv.mkDerivation {
   name = "kernel.image";
   phases = [
     "preparePhase"
-    (if dtb != null then "dtbPhase" else ":")
-    "buildPhase"
-    "installPhase" ];
+    (if commandLine != null then assert dtb != null; "mungeDtbPhase" else ":")
+    (if imageFormat == "fit" then "buildPhaseFIT" else "buildPhaseUImage")
+    "installPhase"
+  ];
   nativeBuildInputs = [
     lzma
     dtc
@@ -31,28 +37,38 @@ stdenv.mkDerivation {
   preparePhase = ''
     cp ${kernel} vmlinux.elf; chmod +w vmlinux.elf
   '';
-  dtbPhase = ''
+  mungeDtbPhase = ''
     dtc -I dtb -O dts -o tmp.dts ${dtb}
     echo '/{ chosen { bootargs = ${builtins.toJSON commandLine}; }; };'  >> tmp.dts
     dtc -I dts -O dtb -o tmp.dtb tmp.dts
-	  ${objcopy} --update-section .appended_dtb=tmp.dtb vmlinux.elf || ${objcopy} --add-section .appended_dtb=${dtb} vmlinux.elf
   '';
 
-  buildPhase =
-    let arch =
-          # per output of "mkimage -A list". I *think* these
-          # are the same as the kernel arch convention, but
-          # maybe that's coincidence
-          if stdenv.isMips
-          then "mips"
-          else if stdenv.isAarch64
-          then "arm64"
-          else throw "unknown arch";
-    in ''
-      ${objcopy} -O binary -R .reginfo -R .notes -R .note -R .comment -R .mdebug -R .note.gnu.build-id -S vmlinux.elf vmlinux.bin
-      rm -f vmlinux.bin.lzma ; lzma -k -z  vmlinux.bin
-      mkimage -A ${arch} -O linux -T kernel -C lzma -a ${loadAddress} -e ${entryPoint} -n '${lib.toUpper arch} Liminix Linux ${extraName}' -d vmlinux.bin.lzma kernel.uimage
-    '';
+  buildPhaseUImage = ''
+    test -f tmp.dtb && ${objcopy} --update-section .appended_dtb=tmp.dtb vmlinux.elf || ${objcopy} --add-section .appended_dtb=tmp.dtb vmlinux.elf
+    ${stripAndZip}
+    mkimage -A ${arch} -O linux -T kernel -C lzma -a ${loadAddress} -e ${entryPoint} -n '${lib.toUpper arch} Liminix Linux ${extraName}' -d vmlinux.bin.lzma kernel.uimage
+  '';
+
+  buildPhaseFIT = ''
+    ${stripAndZip}
+    cat ${./kernel_fdt.its} > mkimage.its
+    cat << _VARS  >> mkimage.its
+    / {
+        images {
+            kernel {
+                data = /incbin/("./vmlinux.bin.lzma");
+                load = <${loadAddress}>;
+                entry = <${entryPoint}>;
+                compression = "lzma";
+            };
+            fdt-1 { data = /incbin/("./tmp.dtb"); };
+        };
+    };
+    _VARS
+    mkimage -f mkimage.its kernel.uimage
+    mkimage -l kernel.uimage
+  '';
+
   installPhase = ''
     cp kernel.uimage $out
   '';