diff --git a/THOUGHTS.txt b/THOUGHTS.txt index 0d4300a2..245532db 100644 --- a/THOUGHTS.txt +++ b/THOUGHTS.txt @@ -515,7 +515,7 @@ Sat Feb 11 14:37:45 GMT 2023 Consolidated TODO * figure out persistent addresses for ethernet (?) -* fix halt/reboot +[SEEMS DONE] * fix halt/reboot [DONE, NO] * Kconfig.local do we still need it? [DONE] * check all config instead of differentiating config/checkedConfig @@ -550,10 +550,10 @@ Things we probably do on hardware 7) overlay with squashfs/ubifs - useful? think about workflows for how this thing is installed 16) gl-ar750 -* decide how to hook up the gl-ar750 to the internets +[DONE] * decide how to hook up the gl-ar750 to the internets 17) mediatek device - gl-mt300 or whatever I have lying around 18) some kind of arm (banana pi router?) -19) should we give routeros a hardware ethernet and maybe an l2tp upstream, +[DONE DIFERENTLY] 19) should we give routeros a hardware ethernet and maybe an l2tp upstream, then we could dogfood the hardware devices. we could run an l2tp service at mythic-beasts, got a /48 there @@ -564,77 +564,7 @@ The reason we would like to run PPPoE instead of L2TP on the "rotuer" device is - closer to real world scenario - means no need to run dhcp client on the wan interface before we - even get to start the l2tpd - - -rotuer needs to talk to something (an "access concentrator") that -speaks pppoe on a lan-adjacent machine, which then needs to put the -packets into an l2tp tunnel - -c->s PADI (discovery initiation, broadcast) -s->c PADO (discovery offer) -c->s PADR (discovery request, unicast) -s->c PADS (discovery confirmation, issues SESSION_ID) - -PADT sent at end - -once we have a session id we can send PPP packets. These are -ethernet packets - -6 bytes dest_mac -6 bytes src_mac -2 bytes ether_type = 0x8864 -1 byte ver=1, type=1 (nybbles) -1 bytes CODE = 0x00 -2 bytes sesion_id -2 bytes length -2 bytes PPP protocol = 0xc021 -... ppp payload ... - -pppoe server runs pppd using a pty. it gets input data from an ethernet -device and communicates by sending packets out of that same device to -a remote computer, so what is it doing with that pty? I assume stripping the -ethernet headers and sending the ppp inside it onto pppd - -x2ltpd does the same, so can we hook the ptys together somehow? - -we can ask xl2tpd to open a session using its control socket, but it -will (I assume) spawn a pppd, and what we would like to do is pass file -descriptors to a pppd that already exists. - -xl2tpd has a preprocessor symbol PPPD to specify what it runs - -could we rp-pppoe will - - -it gets data from an ethernet -device with ppp , encapsulation crap and sends it to the pty, then - -ethernet device - -packet with encrap -> rp-pppoe -> pty -> pppd - - ------- - -what if we start from the "other end"? start a l2tp tunnel and session -so that the peer starts sending ppp negotiation. When we get packets -from the peer we will strip the encapsulation and send the inner ppp -payload to pppd as a subprocess on a pty, which will decide how to -respond. The reply is encapsulated and sent out on a port - -for rp-pppoe, the invocation is - - pppd pty 'pppoe [pppoe_options]' [pppd_options] - -i.e. it runs pppd and tells it to use a pppoe process as its pty. -This process accepts ppp packets on stdin/stdout and encapsulates them -for ethernet. - -So, can we use 'pppoe [pppoe_options]' as the pppd argument to xl2tp - -what do we need to test this? - + even get to start the l2tpd Sun Feb 12 14:57:28 GMT 2023 @@ -662,9 +592,94 @@ call it "borderNetVm" : (for consistency we should rename the "access" qemu socket network to match whatever we call this) -nixos iso-image has a grub label - # A variant to boot with a serial console enabled - LABEL boot-serial + rm border.qcow2 ; nix-shell --argstr liminix `pwd` --argstr nixpkgs `pwd`/../nixpkgs --argstr unstable `pwd`/../unstable-nixpkgs/ ci.nix -A buildEnv --run "run-border-vm" + +Wed Feb 15 22:56:59 GMT 2023 + +configuration for border vm needs to come from somewhere so it's good +for more people than just me + +- pci device for setting up the ethernet +- lns address +- uid so it can do 9p shares? do we need to map things here? + +also need to document the host-side bits so that people can set up +their spare ethernet as vfio + +next step for hacking is to figure out what I was doing with pppoe + +Wed Feb 15 22:59:56 GMT 2023 + +docs ... + +* introduction + +* user guide +** how to build it +** how to flash it on your device +** what to put in configuration.nix +** modules + +* developer guide +** building/running with qemu +*** emulated upstream +** building/running on hardware +*** run in place with TFTP +*** emulated upstream +** CI +** Roadmap +** Contributing - rm border.qcow2 ; nix-shell --argstr liminix `pwd` --argstr nixpkgs `pwd`/../nixpkgs --argstr unstable `pwd`/../unstable-nixpkgs/ ci.nix -A buildEnv --run "sudo run-border-vm" + + nix-shell -p sphinx --run "make -C doc html" + +https://francis.begyn.be/blog/nixos-home-router contains information about avahi reflector + + +Fri Feb 17 00:09:34 GMT 2023 + + 29 11.282085831 81.187.76.242 → 8.8.8.8 ICMP 106 Echo (ping) request id=0x0187, seq=2/512, 4 + 30 11.286314642 90.155.53.19 → 81.187.76.242 ICMP 78 Destination unreachable (Communication admin) + +We're getting packets over the pppoe-l2tp relay thing. Just have to +work out now why we're not routing + +Fri Feb 17 16:54:41 GMT 2023 + +Haha. We weren't routing because we'd used the wrong CHAP password + + + +Fri Feb 17 16:58:27 GMT 2023 + +This TODO is for nlnet task 1 and for bits of subsequent tasks that +are annoying enough that I might poke at them anyway: + + +1) gl-ar750, why do we get "ag71xx 19000000.eth: invalid MAC address, using random address" +2) gl-ar750, wifi +3) document services so I can remember how they work. Refer back to Oct 18 for notes that no longer make sense +4) check out restart behaviour of dependent services when depended-on service dies +5) pppd _creates_ an interface, work out how to fit it into this model +6) add bridge support for lan +7) upgrade ppp to something with an ipv6-up-script option, move ppp and pppoe derivations into their own files +8) get ipv6 address from pppoe +9) get ipv6 delegation from pppoe and add prefix to lan +10) support dhcp6 in dnsmasq, and advertise prefix on lan +11) firewalling and nat - default deny or zero trust? +13) should we check that references to outputs actually correspond with +14) make a flake? +15) see if there are other tests that need adding to CI +15a) is bordervm derivation tested? +18) gl-mt300a +19) gl-mt300n-v2 + + +12) write secrets holder as a service with outputs +16) writable filesystem (ubifs?) +17) overlay with squashfs/ubifs - useful? think about workflows for how this thing is installed + + +I could plug tninkpad into the gl-ar750 LAN port to dogfood the wired +networking