forked from dan/liminix
add bootable config for Turris Omnia
This commit is contained in:
parent
3f0f621809
commit
27ce61ae4e
|
@ -0,0 +1,114 @@
|
|||
{
|
||||
description = ''
|
||||
Turris Omnia
|
||||
************
|
||||
'';
|
||||
|
||||
system = {
|
||||
crossSystem = {
|
||||
config = "armv7l-unknown-linux-musleabihf";
|
||||
};
|
||||
};
|
||||
|
||||
module = {pkgs, config, lib, lim, ... }:
|
||||
let openwrt = pkgs.openwrt; in {
|
||||
imports = [ ../../modules/arch/arm.nix ];
|
||||
kernel = {
|
||||
src = pkgs.pkgsBuildBuild.fetchurl {
|
||||
name = "linux.tar.gz";
|
||||
url = "https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.15.71.tar.gz";
|
||||
hash = "sha256-yhO2cXIeIgUxkSZf/4aAsF11uxyh+UUZu6D1h92vCD8=";
|
||||
};
|
||||
extraPatchPhase = ''
|
||||
${pkgs.openwrt.applyPatches.mvebu}
|
||||
'';
|
||||
config = {
|
||||
PCI = "y";
|
||||
OF = "y";
|
||||
MEMORY = "y"; # for MVEBU_DEVBUS
|
||||
DMADEVICES = "y"; # for MV_XOR
|
||||
CPU_V7 = "y";
|
||||
ARCH_MULTIPLATFORM = "y";
|
||||
ARCH_MVEBU = "y";
|
||||
ARCH_MULTI_V7= "y";
|
||||
PCI_MVEBU = "y";
|
||||
AHCI_MVEBU = "y";
|
||||
MACH_ARMADA_38X = "y";
|
||||
SMP = "y";
|
||||
# this is disabled for the moment because it relies on a GCC
|
||||
# plugin that requires gmp.h to build, and I can't see right now
|
||||
# how to confgure it to find gmp
|
||||
STACKPROTECTOR_PER_TASK = "n";
|
||||
NR_CPUS = "4";
|
||||
VFP = "y";
|
||||
NEON= "y";
|
||||
|
||||
# WARNING: unmet direct dependencies detected for ARCH_WANT_LIBATA_LEDS
|
||||
ATA = "y";
|
||||
|
||||
# switch is DSA
|
||||
# CONFIG_NET_DSA_MV88E6060=y
|
||||
# CONFIG_NET_DSA_MV88E6XXX=y
|
||||
# CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
|
||||
|
||||
# CONFIG_REGMAP=y
|
||||
# CONFIG_REGMAP_I2C=y
|
||||
# CONFIG_REGMAP_SPI=y
|
||||
# CONFIG_REGMAP_MMIO=y
|
||||
|
||||
PSTORE = "y";
|
||||
PSTORE_RAM = "y";
|
||||
PSTORE_CONSOLE = "y";
|
||||
PSTORE_DEFLATE_COMPRESS = "n";
|
||||
|
||||
SERIAL_8250 = "y";
|
||||
SERIAL_8250_CONSOLE = "y";
|
||||
SERIAL_OF_PLATFORM="y";
|
||||
SERIAL_MVEBU_UART = "y";
|
||||
SERIAL_MVEBU_CONSOLE = "y";
|
||||
|
||||
SERIAL_8250_DMA= "y";
|
||||
SERIAL_8250_DW= "y";
|
||||
SERIAL_8250_EXTENDED= "y";
|
||||
SERIAL_8250_MANY_PORTS= "y";
|
||||
SERIAL_8250_SHARE_IRQ= "y";
|
||||
OF_ADDRESS= "y";
|
||||
OF_MDIO= "y";
|
||||
|
||||
MVEBU_DEVBUS = "y"; # "Device Bus controller ... flash devices such as NOR, NAND, SRAM, and FPGA"
|
||||
MVMDIO = "y";
|
||||
MVNETA = "y";
|
||||
MVNETA_BM = "y";
|
||||
MVNETA_BM_ENABLE = "y";
|
||||
MVPP2 = "y";
|
||||
MV_XOR = "y";
|
||||
};
|
||||
};
|
||||
boot = {
|
||||
commandLine = [ "console=ttyS0,115200" ];
|
||||
imageFormat = "fit";
|
||||
};
|
||||
|
||||
hardware = {
|
||||
defaultOutput = "flashimage";
|
||||
loadAddress = lim.parseInt "0x00008000";
|
||||
entryPoint = lim.parseInt "0x00008000";
|
||||
rootDevice = "/dev/mtdblock0";
|
||||
dts = {
|
||||
src = "${config.system.outputs.kernel.modulesupport}/arch/arm/boot/dts/armada-385-turris-omnia.dts";
|
||||
includes = [
|
||||
"${config.system.outputs.kernel.modulesupport}/arch/arm/boot/dts/"
|
||||
];
|
||||
};
|
||||
flash.eraseBlockSize = 65536; # only used for tftpboot
|
||||
networkInterfaces =
|
||||
let
|
||||
inherit (config.system.service.network) link;
|
||||
inherit (config.system.service) bridge;
|
||||
in rec {
|
||||
lan = link.build { ifname = "eth0"; };
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
}
|
|
@ -0,0 +1,48 @@
|
|||
{ config, pkgs, lib, lim, ... } :
|
||||
let
|
||||
inherit (pkgs) serviceFns;
|
||||
svc = config.system.service;
|
||||
|
||||
in rec {
|
||||
imports = [
|
||||
../modules/network
|
||||
../modules/ssh
|
||||
../modules/vlan
|
||||
|
||||
../modules/ext4fs.nix
|
||||
../modules/tftpboot.nix
|
||||
];
|
||||
|
||||
rootfsType = "ext4";
|
||||
|
||||
boot.tftp = {
|
||||
# IP addresses to use in the boot monitor when flashing/ booting
|
||||
# over TFTP. If you are flashing using the stock firmware's Web UI
|
||||
# then these dummy values are fine
|
||||
ipaddr = "10.0.0.8"; # my address
|
||||
serverip = "10.0.0.1"; # build machine or other tftp server
|
||||
loadAddress = lim.parseInt "0x40000800";
|
||||
};
|
||||
|
||||
hostname = "hello";
|
||||
|
||||
services.dhcpc = svc.network.dhcp.client.build {
|
||||
interface = config.hardware.networkInterfaces.lan;
|
||||
|
||||
# don't start DHCP until the hostname is configured,
|
||||
# so it can identify itself to the DHCP server
|
||||
dependencies = [ config.services.hostname ];
|
||||
};
|
||||
|
||||
services.sshd = svc.ssh.build { };
|
||||
|
||||
users.root = {
|
||||
# the password is "secret". Use mkpasswd -m sha512crypt to
|
||||
# create this hashed password string
|
||||
passwd = "$6$y7WZ5hM6l5nriLmo$5AJlmzQZ6WA.7uBC7S8L4o19ESR28Dg25v64/vDvvCN01Ms9QoHeGByj8lGlJ4/b.dbwR9Hq2KXurSnLigt1W1";
|
||||
};
|
||||
|
||||
defaultProfile.packages = with pkgs; [
|
||||
figlet
|
||||
];
|
||||
}
|
|
@ -90,7 +90,7 @@ in {
|
|||
setenv ipaddr ${cfg.ipaddr}
|
||||
setenv bootargs 'liminix ${cmdline} $cmd'
|
||||
tftpboot 0x${lib.toHexString cfg.loadAddress} result/uimage ; tftpboot 0x$(printf %x $rootfsStart) result/rootfs ; tftpboot 0x$dtbStart result/dtb
|
||||
bootm 0x$${lib.toHexString cfg.loadAddress} - 0x$dtbStart
|
||||
bootm 0x${lib.toHexString cfg.loadAddress} - 0x$dtbStart
|
||||
EOF
|
||||
'';
|
||||
};
|
||||
|
|
Loading…
Reference in New Issue