forked from dan/liminix
1
0
Fork 0

start writing configuration guide

This commit is contained in:
Daniel Barlow 2023-09-17 00:07:14 +01:00
parent f81aa54444
commit 54526c1e11
2 changed files with 87 additions and 0 deletions

86
doc/configuration.rst Normal file
View File

@ -0,0 +1,86 @@
Configuration and Module Guide
##############################
Liminix uses the Nix language to provide congruent configuration.
This means that to change anything about the way in which a
Liminix system works, you make that change in
:file:`configuration.nix` (or one of the other files it references)
and rerun :command:`nix-build` or :command:`liminix-rebuild` to action
the change. It is not possible (at least, without shenanigans) to make
changes by logging into the device and running imperative commands
whose effects may later be overridden: :file:`configuration.nix`
always describes the entire system and can be used to recreate that
system at any time. You can usefully keep it under version control.
If you are familiar with NixOS, you will notice some similarities
between NixOS and Liminix configuration, and also some
differences. Sometimes the differences are due to the
resource-constrained devices we deploy onto, sometimes due to
differences in the uses these devices are put to.
Configuration taxonomy
**********************
There are many things you can specify in a configuration, but these
are the ones you most commonly need to change:
* which services (processes) to run
* what packages to install
* permitted users and groups
* Linux kernel configuration options
* Busybox applets
* filesystem layout
Modules
*******
**Modules** are a means of abstraction which allow "bundling"
of configuration options related to a common purpose or theme. For
example, the ``dnsmasq`` module defines a template for a dnsmasq
service, ensures that the dnsmasq package is installed, and provides a
dnsmasq user and group for the service to run as. The ``ppp`` module
defines a service template and also enables various PPP-related kernel
configuration.
Not all modules are included in the configuration by default, because
that would mean that the kernel (and the Busybox binary providing
common CLI tools) was compiled with many unnecessary bells and whistles
and therefore be bigger than needed. (This is not purely an academic concern
if your device has little flash storage). Therefore, specifying a
service is usually a two-step process. For example, to add an NTP
service you first add :file:`modules/ntp` to your ``imports`` list,
then you create a service by calling
:code:`config.system.service.ntp.build { .... }` with the appropriate
service-dependent configuration parameters.
.. code-block:: nix
let svc = config.system.service;
in {
# ...
imports = [
./modules/ntp
# ....
];
config.services.ntp = svc.ntp.build {
pools = { "pool.ntp.org" = ["iburst"]; };
makestep = { threshold = 1.0; limit = 3; };
};
Merely including the module won't define the service on its own: it
only creates the template in ``config.system.service.foo`` and you
have to create an actual service using the template. This is an
intentional choice to allow the creation of multiple
differently-configured services based on the same template - perhaps
e.g. when you have multiple networks (VPNs etc) in different trust
domains, or you want to run two SSH daemons on different ports.
.. tip:: Liminix modules should be quite familiar (but also different)
if you already know how to use NixOS modules. We use the
NixOS module infrastructure code, meaning that you should
recognise the syntax, the type system, the rules for
combining configuration values from different sources. We
don't use the NixOS modules themselves, because the
underlying system is not similar enough for them to work.

View File

@ -6,6 +6,7 @@ Liminix
:caption: Contents:
tutorial
configuration
Indices and tables