forked from dan/liminix
1
0
Fork 0
Commit Graph

151 Commits

Author SHA1 Message Date
Arnout Engelen 04895f9cf6
openwrt: update to v23.05.2 2024-01-25 12:29:03 +01:00
sinavir 7642e23c0a belkin-rt3200: Enable watchdog drivers 2024-01-24 13:38:55 +01:00
Daniel Barlow f19a937eda omnia needs MARVELL_PHY for the WAN port to work
interestingly, we only see this when it boots from mmc, because
for tftpboot the bootloader has already performed negotiation
and therefore it works despite the missing option.
2024-01-09 13:07:14 +00:00
Daniel Barlow f0490f37d5 turris omnia: tidy config, remove dead bits 2024-01-08 19:22:42 +00:00
Daniel Barlow 9a3d7a387e correct turris omnia root device 2024-01-08 18:55:41 +00:00
Daniel Barlow 38a7f0b03b turris omnia: add all lan devices
I think we might turn "lan" into a bridge, but that's for later
2024-01-07 16:54:44 +00:00
Daniel Barlow 049cdbb610 turris omnia: don't hardcode rootfsType 2024-01-03 20:18:07 +00:00
Daniel Barlow 9e0ef68c1f omnia: add MMC block device support 2024-01-02 18:09:44 +00:00
Daniel Barlow 870e4d86cc omnia: support fw_{print,set}env commands 2024-01-02 18:09:12 +00:00
Daniel Barlow e7747832ad turris-omnia: reindent 2024-01-01 20:24:47 +00:00
Daniel Barlow f020d5b25d qemu mips: enable rebooting 2023-12-26 21:58:18 +00:00
Daniel Barlow 1042be912c turris omnia: switch to regular tftpboot output
now it does zimage and rootfs compression
2023-12-23 00:05:34 +00:00
Daniel Barlow 9c894bdabf add tftpboot test for mips 2023-12-21 19:25:45 +00:00
Daniel Barlow 32c13c46bb support aarch64 in tftpboot test 2023-12-19 12:12:12 +00:00
Daniel Barlow e5db2691e5 add CI job to test tftpboot 2023-12-18 22:42:29 +00:00
Daniel Barlow d1e2d525a4 tftpboot omnia using bootz not bootm
because kernel size is now beyond the u-boot size
limit for bootm
2023-12-16 23:40:55 +00:00
Daniel Barlow 55fa9992d4 WIP 2023-12-13 21:54:15 +00:00
Daniel Barlow 95d9e014fb omnia: fix paths 2023-12-13 21:52:28 +00:00
Daniel Barlow 601bb289ee rename diskimage to mbrimage 2023-12-11 19:09:19 +00:00
Daniel Barlow 876bd7d8ce rename flashimage to mtdimage 2023-12-11 19:09:18 +00:00
Daniel Barlow 5eeb277564 move output module imports example -> device
The outputs available are a characteristic of the device, not
the example.
2023-12-10 16:38:53 +00:00
Daniel Barlow 317457f582 extract common config for qemu devices into module 2023-12-09 17:10:41 +00:00
Daniel Barlow 382128b6cf omnia: make wan interface work 2023-11-28 21:38:45 +00:00
Daniel Barlow c803772074 omnia: add hardware ethernet and switch config 2023-11-27 21:37:15 +00:00
Daniel Barlow cc73a98419 support setting network device names
this means that net devices in devices/foo/default.nix can be
specified by their sysfs paths (instead of by "eth0" and "eth1" that
may change from one kernel version to the next) and given mnenomic
names that are helpful for the hardware. Like "wan" and "lan[1..4]"
2023-11-26 23:15:28 +00:00
Daniel Barlow 31a2969972 omnia: add support for wifi
- ath9k and ath10k, both on PCI bus (which can be enumerated, hence
they don't need to be in device tree)

- need to disable PCIe ASPM for the ath9k to work

- appropriate firmware files added for ath10k
2023-11-26 13:25:01 +00:00
Daniel Barlow 76a370cc92 omnia kernel: add watchdog
it's enabled by u-boot so we need at least this minimal capability
otherwise the system reboots after three minutes
2023-11-26 13:07:44 +00:00
Daniel Barlow 27ce61ae4e add bootable config for Turris Omnia 2023-11-24 23:29:12 +00:00
Daniel Barlow c563a6451f add missing param 2023-11-18 14:20:59 +00:00
Daniel Barlow f9f4d97bb8 convert flash params to int 2023-11-12 20:39:06 +00:00
Daniel Barlow abfb35a231 and entryPoint 2023-11-12 18:50:47 +00:00
Daniel Barlow 315907de98 convert hardware loadAddress to int 2023-11-12 18:47:31 +00:00
Daniel Barlow 185117843b convert tftp.loadAddress from string to int 2023-11-12 18:37:33 +00:00
Daniel Barlow 0131686661 use parseInt for hex values 2023-11-12 18:25:38 +00:00
Daniel Barlow f61e737b54 improve doc for outputs and hardware
Changed my mind about "installer" as a first-class concept, at least
in the current implementation. Not every documented output is an
installer
2023-11-12 17:15:58 +00:00
Daniel Barlow 262efaabe6 doc: put all the u-boot/serial stuff in one place to link from 2023-11-12 17:14:33 +00:00
Daniel Barlow 7cfb92e3ce more doc 2023-11-10 21:17:20 +00:00
Daniel Barlow 5e046490de support links from device pages to their installation methods 2023-11-09 23:02:35 +00:00
Daniel Barlow 4cb4f904f8 delete unused kconfig for arm qemus 2023-11-08 21:28:12 +00:00
Daniel Barlow 6489a39424 qemu armv7 2023-11-05 23:19:11 +00:00
Daniel Barlow c40eef25d6 qemu: use phram instead of block2mtd 2023-11-05 19:13:51 +00:00
Daniel Barlow 80793aa694 belkin rt3200 is a ubifs device 2023-11-05 11:32:23 +00:00
Daniel Barlow e6cb5e319b extract NETDEVICES kconfig to kernel.nix module 2023-11-05 11:31:23 +00:00
Daniel Barlow 629914f65e initial support for ubifs 2023-10-16 19:55:17 +01:00
Daniel Barlow 80a09a9a9b rt3200: move the entryPoint 2023-10-10 20:25:42 +01:00
Daniel Barlow bd20f3e419 uimage: make fit optional 2023-10-09 19:47:57 +01:00
Daniel Barlow ed792e0dc0 rt3200: swap wireless driver load order
mt7515e loads first, so that wlan0 is 2.4GHz
mt7515e loads after, so that 5GHz gets wlan1
2023-10-09 19:47:57 +01:00
Daniel Barlow d025c33d30 rt3200: enable flash/mtd 2023-10-09 19:47:57 +01:00
Daniel Barlow a755c9c3c5 delete some inapplicable kconfig 2023-10-09 19:47:57 +01:00
Daniel Barlow fdf74fa06b add mt7915, 7615 wifi modules
7915 won't work until we have working MTD, because it needs to
read calibration data from flash
2023-10-09 19:47:57 +01:00