c219350d7c
add usb storage for turris omnia
...
ideally we would make this a module instead of compiling in
directly
2024-01-26 22:46:36 +00:00
Arnout Engelen
04895f9cf6
openwrt: update to v23.05.2
2024-01-25 12:29:03 +01:00
sinavir
7642e23c0a
belkin-rt3200: Enable watchdog drivers
2024-01-24 13:38:55 +01:00
f19a937eda
omnia needs MARVELL_PHY for the WAN port to work
...
interestingly, we only see this when it boots from mmc, because
for tftpboot the bootloader has already performed negotiation
and therefore it works despite the missing option.
2024-01-09 13:07:14 +00:00
f0490f37d5
turris omnia: tidy config, remove dead bits
2024-01-08 19:22:42 +00:00
9a3d7a387e
correct turris omnia root device
2024-01-08 18:55:41 +00:00
38a7f0b03b
turris omnia: add all lan devices
...
I think we might turn "lan" into a bridge, but that's for later
2024-01-07 16:54:44 +00:00
049cdbb610
turris omnia: don't hardcode rootfsType
2024-01-03 20:18:07 +00:00
9e0ef68c1f
omnia: add MMC block device support
2024-01-02 18:09:44 +00:00
870e4d86cc
omnia: support fw_{print,set}env commands
2024-01-02 18:09:12 +00:00
e7747832ad
turris-omnia: reindent
2024-01-01 20:24:47 +00:00
f020d5b25d
qemu mips: enable rebooting
2023-12-26 21:58:18 +00:00
1042be912c
turris omnia: switch to regular tftpboot output
...
now it does zimage and rootfs compression
2023-12-23 00:05:34 +00:00
9c894bdabf
add tftpboot test for mips
2023-12-21 19:25:45 +00:00
32c13c46bb
support aarch64 in tftpboot test
2023-12-19 12:12:12 +00:00
e5db2691e5
add CI job to test tftpboot
2023-12-18 22:42:29 +00:00
d1e2d525a4
tftpboot omnia using bootz not bootm
...
because kernel size is now beyond the u-boot size
limit for bootm
2023-12-16 23:40:55 +00:00
55fa9992d4
WIP
2023-12-13 21:54:15 +00:00
95d9e014fb
omnia: fix paths
2023-12-13 21:52:28 +00:00
601bb289ee
rename diskimage to mbrimage
2023-12-11 19:09:19 +00:00
876bd7d8ce
rename flashimage to mtdimage
2023-12-11 19:09:18 +00:00
5eeb277564
move output module imports example -> device
...
The outputs available are a characteristic of the device, not
the example.
2023-12-10 16:38:53 +00:00
317457f582
extract common config for qemu devices into module
2023-12-09 17:10:41 +00:00
382128b6cf
omnia: make wan interface work
2023-11-28 21:38:45 +00:00
c803772074
omnia: add hardware ethernet and switch config
2023-11-27 21:37:15 +00:00
cc73a98419
support setting network device names
...
this means that net devices in devices/foo/default.nix can be
specified by their sysfs paths (instead of by "eth0" and "eth1" that
may change from one kernel version to the next) and given mnenomic
names that are helpful for the hardware. Like "wan" and "lan[1..4]"
2023-11-26 23:15:28 +00:00
31a2969972
omnia: add support for wifi
...
- ath9k and ath10k, both on PCI bus (which can be enumerated, hence
they don't need to be in device tree)
- need to disable PCIe ASPM for the ath9k to work
- appropriate firmware files added for ath10k
2023-11-26 13:25:01 +00:00
76a370cc92
omnia kernel: add watchdog
...
it's enabled by u-boot so we need at least this minimal capability
otherwise the system reboots after three minutes
2023-11-26 13:07:44 +00:00
27ce61ae4e
add bootable config for Turris Omnia
2023-11-24 23:29:12 +00:00
c563a6451f
add missing param
2023-11-18 14:20:59 +00:00
f9f4d97bb8
convert flash params to int
2023-11-12 20:39:06 +00:00
abfb35a231
and entryPoint
2023-11-12 18:50:47 +00:00
315907de98
convert hardware loadAddress to int
2023-11-12 18:47:31 +00:00
185117843b
convert tftp.loadAddress from string to int
2023-11-12 18:37:33 +00:00
0131686661
use parseInt for hex values
2023-11-12 18:25:38 +00:00
f61e737b54
improve doc for outputs and hardware
...
Changed my mind about "installer" as a first-class concept, at least
in the current implementation. Not every documented output is an
installer
2023-11-12 17:15:58 +00:00
262efaabe6
doc: put all the u-boot/serial stuff in one place to link from
2023-11-12 17:14:33 +00:00
7cfb92e3ce
more doc
2023-11-10 21:17:20 +00:00
5e046490de
support links from device pages to their installation methods
2023-11-09 23:02:35 +00:00
4cb4f904f8
delete unused kconfig for arm qemus
2023-11-08 21:28:12 +00:00
6489a39424
qemu armv7
2023-11-05 23:19:11 +00:00
c40eef25d6
qemu: use phram instead of block2mtd
2023-11-05 19:13:51 +00:00
80793aa694
belkin rt3200 is a ubifs device
2023-11-05 11:32:23 +00:00
e6cb5e319b
extract NETDEVICES kconfig to kernel.nix module
2023-11-05 11:31:23 +00:00
629914f65e
initial support for ubifs
2023-10-16 19:55:17 +01:00
80a09a9a9b
rt3200: move the entryPoint
2023-10-10 20:25:42 +01:00
bd20f3e419
uimage: make fit optional
2023-10-09 19:47:57 +01:00
ed792e0dc0
rt3200: swap wireless driver load order
...
mt7515e loads first, so that wlan0 is 2.4GHz
mt7515e loads after, so that 5GHz gets wlan1
2023-10-09 19:47:57 +01:00
d025c33d30
rt3200: enable flash/mtd
2023-10-09 19:47:57 +01:00
a755c9c3c5
delete some inapplicable kconfig
2023-10-09 19:47:57 +01:00
