3df1ec76ff
cleanup whitespace and commas
...
* [] is now [ ]
* {} is now { }
* commas in arglists go at end of line not beginning
In short, I ran the whole thing through nixfmt-rfc-style but only
accepted about 30% of its changes. I might grow accustomed to more
of it over time
2024-06-30 17:16:28 +01:00
e94bf62ec1
remove dead code (run deadnix)
2024-06-29 22:59:27 +01:00
1a314e55b7
firewall module: provide default rules and merge extraRules
...
a firewall with no configuration will get a relatively sane ruleset. a
firewall with `extraRules` will get them deep merged into the default
rules. Specifying `rules` will override the defaults
2024-03-21 12:00:34 +00:00
9263b21faa
create gateway profile by extracting from rotuer example
2024-03-21 10:04:42 +00:00
175db9f604
tail -F for rotuer
2024-02-16 18:30:24 +00:00
57aece0709
rotuer: don't forward queries for local domain
2024-02-11 23:32:46 +00:00
c1d285a220
rotuer: network debugging tools
2024-02-11 23:32:46 +00:00
1206d02200
rotuer-secrets: remove root_password, add wifi ssid and domainName
...
this is step one towards getting rid of rotuer-secrets completely and
turning rotuer into a "profile" module that can be less hackily
customised for other people's networks
2024-02-11 15:56:14 +00:00
7c196bf9b4
rotuer: make 5GHz wifi faster
...
VHT doesn't work unless HT is enabled, apparently
2024-02-11 15:38:19 +00:00
92b0bec038
rotuer: add schnapps and the rest of the lan interfaces
2024-02-07 23:48:10 +00:00
29e61be26c
rotuer: get lan rfc1918 prefix from secrets
2024-02-07 23:46:16 +00:00
c1101d3af5
make extlinux work with liminix-rebuild
...
add /boot to the systemConfiguration closure
2024-01-08 18:58:07 +00:00
228c0a1668
pass rootOptions config as rootflags= kernel cmdline opt
2024-01-08 18:54:49 +00:00
3c941b4ce2
partial btrfs support
...
doesn't actually know how to make the filesystem, just
kernel config and accept it as a valid option
2024-01-07 16:43:43 +00:00
55fa9992d4
WIP
2023-12-13 21:54:15 +00:00
5eeb277564
move output module imports example -> device
...
The outputs available are a characteristic of the device, not
the example.
2023-12-10 16:38:53 +00:00
c81e7c4d35
move all output modules to subdirectory, trash standard.nix
...
standard.nix isn't, is the essence here. Not all devices
support flashimage as it is currently defined - some
have diskimage, some have neither
2023-12-10 15:23:12 +00:00
a896c4e31c
rename wlan services for devices with > 1 radio
...
let's standardise on having 2.4GHz radio be "wlan", and
5GHz as "wlan5"
2023-10-07 22:28:57 +01:00
c59a228955
this is the dhcp6c service we want
2023-09-26 16:43:03 +01:00
f7b30939b5
remove service-state when service exits
2023-09-13 22:49:00 +01:00
91e957ced7
static leases for rotuer
2023-09-04 23:07:13 +01:00
a24c2a23a0
whitespace
2023-09-04 22:06:15 +01:00
9e52faa0b6
remove unused imports
2023-09-04 22:05:42 +01:00
6805e0090d
working down the TODOs
2023-09-01 17:57:22 +01:00
7ad848cb77
add service to enable packet forwarding
...
might be worth looking into adding RA config to this
2023-09-01 17:34:47 +01:00
3609d8d5ee
implement route as module-based-service
2023-08-31 23:24:23 +01:00
aecbe08f08
add o+x permission on service-state directories
...
this is needed for resolvconf, which writes resolv.conf as
an output and wants to make it world-readable
2023-08-28 22:02:28 +01:00
ff2d3e1a63
TODO comments
2023-08-28 22:02:28 +01:00
8688d47c65
rotuer: create resolv.conf
2023-08-28 22:02:28 +01:00
e86daf9bbc
default value for services.default
...
as a default default target, start all the services
2023-08-28 22:02:28 +01:00
31f0213b6f
convert network link/address to module-based-service
...
... and make bridge use it.
We also had to convert bridge back into a pair of services.
Downstreams want to depend on the bridge it self being configured
even if not necessarily all the members are up. e.g. don't want
to break ssh on lan if there's a misconfigured wlan device
2023-08-28 22:02:28 +01:00
540a1dfd76
remove interface.device
...
build-time uses can mostly be replaced with interface.name
for runtime uses, switch to $(output ${interface} name)
2023-08-28 22:02:28 +01:00
6f92f8fa8b
merge bridge services into one
2023-08-16 23:29:53 +01:00
3ea40f95dc
convert pppoe to serviceDefn
2023-08-10 22:53:45 +01:00
2942c465b9
add ssh module
2023-08-10 22:53:21 +01:00
2414dd4b55
convert ntp to serviceDefn
2023-08-05 14:16:54 +01:00
93e04bb834
convert bridge service to serviceDefn
2023-08-05 14:10:14 +01:00
f82501d278
update hostapd to "build" syntax
2023-08-05 12:21:18 +01:00
90c1d59aca
convert firewall service to new serviceDefn
...
this is a bit kludgey with dependencies, need to
come back and look at that
2023-08-05 12:07:35 +01:00
fbb2c04132
move module-based-service parameter types into service
...
This is in preparation for writing something that extracts them
into documentation.
user configurations now call config.system.service.foo.build { ...params }
instead of config.system.service.foo
the parameter type definitions themselves now move into the
config stanza of the module referencing the service
new helper function liminix.callService
The only service moved so far is dnsmasq
2023-08-04 20:39:29 +01:00
9994c161d4
DRY up wireless config
2023-07-22 23:37:01 +01:00
bf1d9beec1
add first version of ntp module
2023-07-22 23:25:25 +01:00
4396afa97b
inline excessive lets
2023-07-20 12:05:36 +01:00
9b70fd62f6
extract bridge to module-based services
2023-07-20 12:02:09 +01:00
86e73317ee
alias config.system.service
2023-07-20 11:28:45 +01:00
648ea5613b
use module-based-service for hostapd
2023-07-16 17:51:50 +01:00
1117f98afc
remove redundant let
2023-07-16 17:51:50 +01:00
d7f3e05063
turn nftables firewall into a service-providing module
2023-07-16 17:51:50 +01:00
669af24247
make a module for dnsmasq
2023-07-14 23:18:21 +01:00
c13defc891
rename modules/ppp.nix -> modules/ppp/default.nix
2023-07-14 21:08:33 +01:00
