liminix

rotuer.nix (4907B)

---

 # This is not part of Liminix per se. This is my "scratchpad"
 # configuration for the device I'm testing with.
 #
 # Parts of it do do things that Liminix eventually needs to do, but
 # don't look in here for solutions - just for identifying the
 # problems.
 
 
 { config, pkgs, lib, ... } :
 let
   secrets = import ./rotuer-secrets.nix;
   inherit (pkgs.liminix.services) oneshot longrun bundle;
   inherit (pkgs) serviceFns;
   svc = config.system.service;
   wirelessConfig =  {
     country_code = "GB";
     inherit (secrets) wpa_passphrase;
     auth_algs = 1; # 1=wpa2, 2=wep, 3=both
     wpa = 2;       # 1=wpa, 2=wpa2, 3=both
     wpa_key_mgmt = "WPA-PSK";
     wpa_pairwise = "TKIP CCMP";   # auth for wpa (may not need this?)
     rsn_pairwise = "CCMP";        # auth for wpa2
     wmm_enabled = 1;
   };
 
 in rec {
   boot = {
     tftp = {
       freeSpaceBytes = 3 * 1024 * 1024;
       serverip = "10.0.0.1";
       ipaddr = "10.0.0.8";
     };
   };
 
   imports = [
     ../modules/wlan.nix
     ../modules/network
     ../modules/ppp
     ../modules/dnsmasq
     ../modules/dhcp6c
     ../modules/firewall
     ../modules/hostapd
     ../modules/bridge
     ../modules/ntp
     ../modules/ssh
   ];
   hostname = "rotuer";
 
   services.hostap = svc.hostapd.build {
     interface = config.hardware.networkInterfaces.wlan;
     params = {
       ssid = "liminix";
       hw_mode="g";
       channel = "2";
       ieee80211n = 1;
     } // wirelessConfig;
   };
 
   services.hostap5 = svc.hostapd.build {
     interface = config.hardware.networkInterfaces.wlan5;
     params = rec {
       ssid = "liminix_5";
       hw_mode="a";
       channel = 36;
       ht_capab = "[HT40+]";
       vht_oper_chwidth = 1;
       vht_oper_centr_freq_seg0_idx = channel + 6;
       ieee80211ac = 1;
     } // wirelessConfig;
   };
 
   services.int = svc.network.address.build {
     interface = svc.bridge.primary.build { ifname = "int"; };
     family = "inet"; address ="10.8.0.1"; prefixLength = 16;
   };
 
   services.bridge =  svc.bridge.members.build {
     primary = services.int;
     members = with config.hardware.networkInterfaces;
       [ wlan
         wlan5
         lan ];
   };
 
   services.ntp = svc.ntp.build {
     pools = { "pool.ntp.org" = ["iburst"]; };
     makestep = { threshold = 1.0; limit = 3; };
   };
 
   services.sshd = svc.ssh.build { };
 
   users.root = secrets.root;
 
   services.dns =
     let interface = services.int;
     in svc.dnsmasq.build {
       resolvconf = services.resolvconf;
       inherit interface;
       ranges = [
         "10.8.0.10,10.8.0.240"
         # ra-stateless: sends router advertisements with the O and A
         # bits set, and provides a stateless DHCP service. The client
         # will use a SLAAC address, and use DHCP for other
         # configuration information.
         "::,constructor:$(output ${interface} ifname),ra-stateless"
       ];
 
       # You can add static addresses for the DHCP server here.  I'm
       # not putting my actual MAC addresses in a public git repo ...
       hosts = { } // lib.optionalAttrs (builtins.pathExists ./static-leases.nix) (import ./static-leases.nix);
 
       domain = "fake.liminix.org";
     };
 
   services.wan = svc.pppoe.build {
     interface = config.hardware.networkInterfaces.wan;
     ppp-options = [
       "debug" "+ipv6" "noauth"
       "name" secrets.l2tp.name
       "password" secrets.l2tp.password
     ];
   };
 
   services.resolvconf = oneshot rec {
     dependencies = [ services.wan ];
     name = "resolvconf";
     up = ''
       . ${serviceFns}
       ( in_outputs ${name}
        echo "nameserver $(output ${services.wan} ns1)" > resolv.conf
        echo "nameserver $(output ${services.wan} ns2)" >> resolv.conf
        chmod 0444 resolv.conf
       )
     '';
   };
 
   filesystem =
     let inherit (pkgs.pseudofile) dir symlink;
     in dir {
       etc = dir {
         "resolv.conf" = symlink "${services.resolvconf}/.outputs/resolv.conf";
       };
     };
 
   services.defaultroute4 = svc.network.route.build {
     via = "$(output ${services.wan} address)";
     target = "default";
     dependencies = [ services.wan ];
   };
 
   services.defaultroute6 = svc.network.route.build {
     via = "$(output ${services.wan} ipv6-peer-address)";
     target = "default";
     interface = services.wan;
   };
 
   services.firewall = svc.firewall.build {
     ruleset = import ./demo-firewall.nix;
   };
 
   services.packet_forwarding = svc.network.forward.build { };
 
   services.dhcp6c =
     let client = svc.dhcp6c.client.build {
           interface = services.wan;
         };
     in bundle {
       name = "dhcp6c";
       contents = [
         (svc.dhcp6c.prefix.build {
           inherit client;
           interface = services.int;
         })
         (svc.dhcp6c.address.build {
           inherit client;
           interface = services.wan;
         })
       ];
     };
 
   defaultProfile.packages = with pkgs; [
     min-collect-garbage
   ];
 
   programs.busybox.applets = [
     "fdisk" "sfdisk"
   ];
 }