{ config, pkgs, ... } : let inherit (pkgs.liminix.networking) interface address udhcpc odhcpc; inherit (pkgs.liminix.services) oneshot longrun bundle target output; in rec { services.loopback = let iface = interface { type = "loopback"; device = "lo";}; in bundle { name = "loopback"; contents = [ (address iface { family = "inet4"; address ="127.0.0.1"; prefixLength = 8;}) (address iface { family = "inet6"; address ="::1"; prefixLength = 128;}) ]; }; services.dhcpv4 = let iface = interface { type = "hardware"; device = "eth0"; }; in udhcpc iface {}; services.dhcpv6 = let iface = interface { type = "hardware"; device = "eth0"; }; in odhcpc iface { uid = "e7"; }; services.ntp = longrun { # the simplest approach at the consumer end is to require the # producer to create a file per output variable. name = "ntp"; run = let inherit (services) dhcpv4 dhcpv6; in "${pkgs.ntp}/bin/ntpd $(cat ${output dhcpv4 "ntp_servers"}) $(cat ${output dhcpv6 "NTP_IP"})"; # I don't think it's possible to standardise the file names # generally, as different services have different outputs, but it # would be cool if services that provide an interface could use # the same name as each other. e.g. for anything implementing # addressProvider you might expect (output svc "address") or # (output svc "family") to work. Otherwise switching a network link # from static to dhcp might require reviewing all the downstreams # that refer to it. # Also, services should declare the outputs they provide outputs = []; dependencies = [services.dhcpv4]; }; services.defaultroute4 = let inherit (services) dhcpv4; in oneshot { name = "defaultroute4"; up = '' ip route add default gw $(cat ${output dhcpv4 "address"}) echo "1" > /sys/net/ipv4/$(cat ${output dhcpv4 "ifname"}) ''; down = '' ip route del default gw $(cat ${output dhcpv4 "address"}) echo "0" > /sys/net/ipv4/$(cat ${output dhcpv4 "ifname"}) ''; }; services.default = target { name = "default"; contents = with services; [ loopback ntp defaultroute4 ]; }; systemPackages = [ pkgs.hello ] ; }