forked from dan/liminix
1
0
Fork 0

convert flash params to int

This commit is contained in:
Daniel Barlow 2023-11-12 20:39:06 +00:00
parent abfb35a231
commit f9f4d97bb8
11 changed files with 21 additions and 21 deletions

View File

@ -106,9 +106,9 @@
loadAddress = lim.parseInt "0x80060000";
entryPoint = lim.parseInt "0x80060000";
flash = {
address = "0x9F060000";
size ="0xfa0000";
eraseBlockSize = "65536";
address = lim.parseInt "0x9F060000";
size = lim.parseInt "0xfa0000";
eraseBlockSize = 65536;
};
rootDevice = "/dev/mtdblock5";
dts = {

View File

@ -69,9 +69,9 @@
# 0x000000260000-0x000000f80000 : "rootfs"
flash = {
address = "0xbc050000";
size ="0xf80000";
eraseBlockSize = "65536";
address = lim.parseInt "0xbc050000";
size = lim.parseInt "0xf80000";
eraseBlockSize = 65536;
};
rootDevice = "/dev/mtdblock5";

View File

@ -66,9 +66,9 @@
entryPoint = lim.parseInt "0x80000000";
flash = {
address = "0xbc050000";
size = "0xfb0000";
eraseBlockSize = "65536";
address = lim.parseInt "0xbc050000";
size = lim.parseInt "0xfb0000";
eraseBlockSize = 65536;
};
rootDevice = "/dev/mtdblock5";

View File

@ -69,7 +69,7 @@
entryPoint = lim.parseInt "0x0";
rootDevice = "/dev/mtdblock0";
flash.eraseBlockSize = "65536"; # c.f. pkgs/mips-vm/mips-vm.sh
flash.eraseBlockSize = 65536; # c.f. pkgs/mips-vm/mips-vm.sh
networkInterfaces =
let inherit (config.system.service.network) link;
in {

View File

@ -71,7 +71,7 @@
entryPoint = lim.parseInt "0x00010000";
rootDevice = "/dev/mtdblock0";
flash.eraseBlockSize = "65536"; # c.f. pkgs/mips-vm/mips-vm.sh
flash.eraseBlockSize = 65536; # c.f. pkgs/mips-vm/mips-vm.sh
networkInterfaces =
let inherit (config.system.service.network) link;
in {

View File

@ -73,7 +73,7 @@
in {
defaultOutput = "vmroot";
rootDevice = "/dev/mtdblock0";
flash.eraseBlockSize = "65536"; # c.f. pkgs/run-liminix-vm/run-liminix-vm.sh
flash.eraseBlockSize = 65536;
networkInterfaces =
let inherit (config.system.service.network) link;
in {

View File

@ -48,15 +48,15 @@ in {
kernel uimage and root fs. Usually not the entire flash, as
we don't want to clobber the bootloader, calibration data etc
'';
type = types.str;
type = types.ints.unsigned;
};
size = mkOption {
type = types.str;
type = types.ints.unsigned;
description = "Size in bytes of the firmware partition";
};
eraseBlockSize = mkOption {
description = "Flash erase block size in bytes";
type = types.str;
type = types.ints.unsigned;
};
};
loadAddress = mkOption { type = types.ints.unsigned; default = null; };

View File

@ -37,7 +37,7 @@ in
cp ${systemConfiguration}/bin/activate $TMPDIR/empty/activate
ln -s ${pkgs.s6-init-bin}/bin/init $TMPDIR/empty/init
grafts=$(sed < ${systemConfiguration}/etc/nix-store-paths 's/^\(.*\)$/--graft \1:\1/g')
mkfs.jffs2 --compression-mode=size ${endian} -e ${config.hardware.flash.eraseBlockSize} --enable-compressor=lzo --pad --root $TMPDIR/empty --output $out $grafts --squash --faketime
mkfs.jffs2 --compression-mode=size ${endian} -e ${toString config.hardware.flash.eraseBlockSize} --enable-compressor=lzo --pad --root $TMPDIR/empty --output $out $grafts --squash --faketime
'';
};
};

View File

@ -75,7 +75,7 @@ in {
firmware =
let
o = config.system.outputs;
bs = config.hardware.flash.eraseBlockSize;
bs = toString config.hardware.flash.eraseBlockSize;
in pkgs.runCommand "firmware" {} ''
dd if=${o.uimage} of=$out bs=${bs} conv=sync
dd if=${o.rootfs} of=$out bs=${bs} conv=sync,nocreat,notrunc oflag=append
@ -107,8 +107,8 @@ in {
setenv serverip ${tftp.serverip}
setenv ipaddr ${tftp.ipaddr}
tftp 0x${toHexString tftp.loadAddress} result/firmware.bin
erase 0x$(printf %x ${flash.address}) +${flash.size}
cp.b 0x${toHexString tftp.loadAddress} 0x$(printf %x ${flash.address}) \''${filesize}
erase 0x${toHexString flash.address} +0x${toHexString flash.size}
cp.b 0x${toHexString tftp.loadAddress} 0x${toHexString flash.address} \''${filesize}
echo command line was ${builtins.toJSON (concatStringsSep " " config.boot.commandLine)}
EOF
'';

View File

@ -74,7 +74,7 @@ in {
rootfsBytes=$(($(stat -L -c %s ${o.rootfs}) + 0x100000 &(~0xfffff)))
rootfsBytes=$(($rootfsBytes + ${toString cfg.freeSpaceBytes} ))
rootfsMb=$(($rootfsBytes >> 20))
cmd="mtdparts=phram0:''${rootfsMb}M(rootfs) phram.phram=phram0,''${rootfsStart},''${rootfsBytes},${config.hardware.flash.eraseBlockSize} root=/dev/mtdblock0";
cmd="mtdparts=phram0:''${rootfsMb}M(rootfs) phram.phram=phram0,''${rootfsStart},''${rootfsBytes},${toString config.hardware.flash.eraseBlockSize} root=/dev/mtdblock0";
dtbStart=$(printf %x $((${toString cfg.loadAddress} + $rootfsBytes + 0x100000 + $uimageSize )))

View File

@ -46,7 +46,7 @@ in {
buildPhaseUImage = ''
test -f tmp.dtb && ${objcopy} --update-section .appended_dtb=tmp.dtb vmlinux.elf || ${objcopy} --add-section .appended_dtb=tmp.dtb vmlinux.elf
${stripAndZip}
mkimage -A ${arch} -O linux -T kernel -C lzma -a 0x${lib.toHexString loadAddress} -e 0x${lib.tohexString entryPoint} -n '${lib.toUpper arch} Liminix Linux ${extraName}' -d vmlinux.bin.lzma kernel.uimage
mkimage -A ${arch} -O linux -T kernel -C lzma -a 0x${lib.toHexString loadAddress} -e 0x${lib.toHexString entryPoint} -n '${lib.toUpper arch} Liminix Linux ${extraName}' -d vmlinux.bin.lzma kernel.uimage
'';
buildPhaseFIT = ''