sinavir
/
liminix
forked from dan/liminix
1
0
Fork 0
Code Pull Requests Activity
925 Commits
9 Branches
0 Tags
6.9 MiB
Commit Graph

165 Commits (main)

Author SHA1 Message Date
Daniel Barlow ca64e9035e gl-ar750 ath9k needs cal data from MTD 2024-02-16 20:44:56 +00:00
Daniel Barlow b5722a0153 gl-ar750: ath10k wireless depends on firmware 
so make sure the firmware is present _first_

the ath10k is still broken anyway, looking into why
 2024-02-16 00:38:36 +00:00
Daniel Barlow 8ac848b1e6 ath10k_pci: wifi modules must be modules 2024-02-13 12:56:03 +00:00
Daniel Barlow c50423f689 turris omnia: upgrade to mainline 6.7.4 kernel 
On this device we don't need the openwrt kernel or patches. The
newer kernel also fixes the weird one minute pause at boot when
it was doing something with either mmc or switch.
 2024-02-12 20:43:01 +00:00
Daniel Barlow 65479e206b use regular kernel not backports for mac80211 
the kernel on most devices is now newer than the version that the
backported drivers were backported from
 2024-02-12 20:41:10 +00:00
Daniel Barlow 86d19c54b3 turris omnia kernel: add RTC, i2c mux, eeprom 2024-02-09 22:34:46 +00:00
dan 273c66b2d3 Merge pull request 'Add support for TP-Link Archer AX23' (#6) from raboof/liminix:add-archer-ax23-v1-bak into main 
Reviewed-on: dan/liminix#6
 2024-02-08 17:47:46 +00:00
Arnout Engelen 63e3f2aa58
Add support for TP-Link Archer AX23 2024-02-06 18:00:55 +01:00
Daniel Barlow f875622100 improve formatting 2024-02-04 18:24:01 +00:00
Daniel Barlow 49ec4a2961 installation instructions for Turris Omnia 
feels like a milestone, or at least a big step towards one
 2024-02-04 18:20:04 +00:00
Daniel Barlow c8154a2db9 kernel: add "conditional" config 
imagine: you are using a device that requires
CONFIG_MYDEVICE_FROBOZZ_DRIVER but only if CONFIG_FROBOZZ has been
specified elsewhere. Because we check that every requested config
symbol actually appears in .config then it can't be added
unconditionally or the build will fail if CONFIG_FROBOZZ wasn't asked
for.

I'm not 100% happy about this design but it's the best I've thought of
so far.
 2024-02-04 18:12:15 +00:00
Daniel Barlow c1ad139310 whitespace 2024-02-02 19:43:34 +00:00
Daniel Barlow f682b26c29 omnia seems very fussy about tftp load address 
when loading with 0x1000000 base address, something was getting
corrupted in the uncompressed rootfs

$ head -c $(printf "%d" 0x2be0000) rootfs | sha1sum
142571fe0436c18191727d1d4c2fd32163c1f2e1  -
=> sha1sum 0x1000000 2be0000
sha1 for 01000000 ... 03bdffff ==> 142571fe0436c18191727d1d4c2fd32163c1f2e1

but!

$  head -c $(printf "%d" 0x2bf0000) rootfs | sha1sum
7aa004ba87c6772bade491fbade164e2dfe100f9  -
=> sha1sum 0x1000000 2bf0000
sha1 for 01000000 ... 03beffff ==> 1a0923a94784d0c0b86006c5e6fff1649770dad3
 2024-02-02 19:36:11 +00:00
Daniel Barlow c219350d7c add usb storage for turris omnia 
ideally we would make this a module instead of compiling in
directly
 2024-01-26 22:46:36 +00:00
Arnout Engelen 04895f9cf6
openwrt: update to v23.05.2 2024-01-25 12:29:03 +01:00
sinavir 7642e23c0a belkin-rt3200: Enable watchdog drivers 2024-01-24 13:38:55 +01:00
Daniel Barlow f19a937eda omnia needs MARVELL_PHY for the WAN port to work 
interestingly, we only see this when it boots from mmc, because
for tftpboot the bootloader has already performed negotiation
and therefore it works despite the missing option.
 2024-01-09 13:07:14 +00:00
Daniel Barlow f0490f37d5 turris omnia: tidy config, remove dead bits 2024-01-08 19:22:42 +00:00
Daniel Barlow 9a3d7a387e correct turris omnia root device 2024-01-08 18:55:41 +00:00
Daniel Barlow 38a7f0b03b turris omnia: add all lan devices 
I think we might turn "lan" into a bridge, but that's for later
 2024-01-07 16:54:44 +00:00
Daniel Barlow 049cdbb610 turris omnia: don't hardcode rootfsType 2024-01-03 20:18:07 +00:00
Daniel Barlow 9e0ef68c1f omnia: add MMC block device support 2024-01-02 18:09:44 +00:00
Daniel Barlow 870e4d86cc omnia: support fw_{print,set}env commands 2024-01-02 18:09:12 +00:00
Daniel Barlow e7747832ad turris-omnia: reindent 2024-01-01 20:24:47 +00:00
Daniel Barlow f020d5b25d qemu mips: enable rebooting 2023-12-26 21:58:18 +00:00
Daniel Barlow 1042be912c turris omnia: switch to regular tftpboot output 
now it does zimage and rootfs compression
 2023-12-23 00:05:34 +00:00
Daniel Barlow 9c894bdabf add tftpboot test for mips 2023-12-21 19:25:45 +00:00
Daniel Barlow 32c13c46bb support aarch64 in tftpboot test 2023-12-19 12:12:12 +00:00
Daniel Barlow e5db2691e5 add CI job to test tftpboot 2023-12-18 22:42:29 +00:00
Daniel Barlow d1e2d525a4 tftpboot omnia using bootz not bootm 
because kernel size is now beyond the u-boot size
limit for bootm
 2023-12-16 23:40:55 +00:00
Daniel Barlow 55fa9992d4 WIP 2023-12-13 21:54:15 +00:00
Daniel Barlow 95d9e014fb omnia: fix paths 2023-12-13 21:52:28 +00:00
Daniel Barlow 601bb289ee rename diskimage to mbrimage 2023-12-11 19:09:19 +00:00
Daniel Barlow 876bd7d8ce rename flashimage to mtdimage 2023-12-11 19:09:18 +00:00
Daniel Barlow 5eeb277564 move output module imports example -> device 
The outputs available are a characteristic of the device, not
the example.
 2023-12-10 16:38:53 +00:00
Daniel Barlow 317457f582 extract common config for qemu devices into module 2023-12-09 17:10:41 +00:00
Daniel Barlow 382128b6cf omnia: make wan interface work 2023-11-28 21:38:45 +00:00
Daniel Barlow c803772074 omnia: add hardware ethernet and switch config 2023-11-27 21:37:15 +00:00
Daniel Barlow cc73a98419 support setting network device names 
this means that net devices in devices/foo/default.nix can be
specified by their sysfs paths (instead of by "eth0" and "eth1" that
may change from one kernel version to the next) and given mnenomic
names that are helpful for the hardware. Like "wan" and "lan[1..4]"
 2023-11-26 23:15:28 +00:00
Daniel Barlow 31a2969972 omnia: add support for wifi 
- ath9k and ath10k, both on PCI bus (which can be enumerated, hence
they don't need to be in device tree)

- need to disable PCIe ASPM for the ath9k to work

- appropriate firmware files added for ath10k
 2023-11-26 13:25:01 +00:00
Daniel Barlow 76a370cc92 omnia kernel: add watchdog 
it's enabled by u-boot so we need at least this minimal capability
otherwise the system reboots after three minutes
 2023-11-26 13:07:44 +00:00
Daniel Barlow 27ce61ae4e add bootable config for Turris Omnia 2023-11-24 23:29:12 +00:00
Daniel Barlow c563a6451f add missing param 2023-11-18 14:20:59 +00:00
Daniel Barlow f9f4d97bb8 convert flash params to int 2023-11-12 20:39:06 +00:00
Daniel Barlow abfb35a231 and entryPoint 2023-11-12 18:50:47 +00:00
Daniel Barlow 315907de98 convert hardware loadAddress to int 2023-11-12 18:47:31 +00:00
Daniel Barlow 185117843b convert tftp.loadAddress from string to int 2023-11-12 18:37:33 +00:00
Daniel Barlow 0131686661 use parseInt for hex values 2023-11-12 18:25:38 +00:00
Daniel Barlow f61e737b54 improve doc for outputs and hardware 
Changed my mind about "installer" as a first-class concept, at least
in the current implementation. Not every documented output is an
installer
 2023-11-12 17:15:58 +00:00
Daniel Barlow 262efaabe6 doc: put all the u-boot/serial stuff in one place to link from 2023-11-12 17:14:33 +00:00