configure hostapds in gateway profile

examples/rotuer.nix

@@ -18,11 +18,6 @@ let
   wirelessConfig =  {
     country_code = "GB";
     inherit (secrets) wpa_passphrase;
-    auth_algs = 1; # 1=wpa2, 2=wep, 3=both
-    wpa = 2;       # 1=wpa, 2=wpa2, 3=both
-    wpa_key_mgmt = "WPA-PSK";
-    wpa_pairwise = "TKIP CCMP";   # auth for wpa (may not need this?)
-    rsn_pairwise = "CCMP";        # auth for wpa2
     wmm_enabled = 1;
   };
 
@@ -57,29 +52,26 @@ in rec {
         family = "inet"; address ="${secrets.lan.prefix}.1"; prefixLength = 24;
       };
     };
-  };
-  services.hostap = svc.hostapd.build {
-    interface = config.hardware.networkInterfaces.wlan;
-    params = {
-      ssid = secrets.ssid;
-      hw_mode="g";
-      channel = "2";
-      ieee80211n = 1;
-    } // wirelessConfig;
-  };
-
-  services.hostap5 = svc.hostapd.build {
-    interface = config.hardware.networkInterfaces.wlan5;
-    params = rec {
-      ssid = "${secrets.ssid}5";
-      hw_mode="a";
-      channel = 36;
-      ht_capab = "[HT40+]";
-      vht_oper_chwidth = 1;
-      vht_oper_centr_freq_seg0_idx = channel + 6;
-      ieee80211n = 1;
-      ieee80211ac = 1;
-    } // wirelessConfig;
+    wireless.networks = {
+      telent = {
+        interface = config.hardware.networkInterfaces.wlan;
+        ssid = secrets.ssid;
+        hw_mode="g";
+        channel = "2";
+        ieee80211n = 1;
+      } // wirelessConfig;
+      telent5 = rec {
+        interface = config.hardware.networkInterfaces.wlan5;
+        ssid = "${secrets.ssid}5";
+        hw_mode="a";
+        channel = 36;
+        ht_capab = "[HT40+]";
+        vht_oper_chwidth = 1;
+        vht_oper_centr_freq_seg0_idx = channel + 6;
+        ieee80211n = 1;
+        ieee80211ac = 1;
+      } // wirelessConfig;
+    };
   };
 
   services.ntp = svc.ntp.build {

modules/profiles/gateway.nix

@@ -52,7 +52,7 @@ in {
     ../bridge
     ../ntp
     ../ssh
-#    { config.services = hostaps; }
+    { config.services = hostaps; }
   ];