dan/liminix
1
0
Fork 5
Code

proofread

Browse Source
This commit is contained in:
Daniel Barlow 2024-12-24 14:01:30 +00:00
parent 3e19f1b927
commit 608d3e3abf
1 changed files with 17 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
devices/belkin-rt3200/default.nix
View File

@ -57,18 +57,18 @@
The default target for this device is ``outputs.ubimage`` which
makes a ubifs image suitable for use with :command:`ubiupdatevol`.
For a first-time installation the simplest way to achieve this is
using the OpenWrt recovery system that you installed in the
previous step. In this configuration the device assigns itself the
IP address 192.168.1.1/24 on its LAN ports and expects the
connected computer to have 192.168.1.254
To write this to the device we use the OpenWrt recovery system
installed in the previous step. In this configuration the
device assigns itself the IP address 192.168.1.1/24 on its LAN
ports and expects the connected computer to have 192.168.1.254
The `ubi0_7` device in these instructions is correct as of Dec
2024 (dangowrt/owrt-ubi-installer commit d79e7928). If you are
installing some time later, it is important to check the output
from :command:`ubinfo -a` and make sure you are updating the
"liminix" volume and not some other one which had been introduced
since I wrote this.
.. warning:: The `ubi0_7` device in these instructions is correct
as of Dec 2024 (dangowrt/owrt-ubi-installer commit
d79e7928). If you are installing some time later, it
is important to check the output from
:command:`ubinfo -a` and make sure you are updating
the "liminix" volume and not some other one which had
been introduced since I wrote this.
.. code-block:: console
@ -87,6 +87,7 @@
Character device major/minor: 250:8
root@OpenWrt:~# ubiupdatevol /dev/ubi0_7 /tmp/rootfs
For subsequent Liminix reinstalls, you don't need to repeat the
"Preparation" step and in fact should seek to avoid it if
possible. Updating volumes with :command:`ubiupdatevol` will