commit 9263b21faa487abdfd89cd590c1c870d34640a0a
parent 0a820a702ab7b99ed3e437f108c6fdf14c69e9c0
Author: Daniel Barlow <dan@telent.net>
Date: Mon, 18 Mar 2024 00:05:43 +0000
create gateway profile by extracting from rotuer example
Diffstat:
4 files changed, 235 insertions(+), 151 deletions(-)
diff --git a/examples/extneder.nix b/examples/extneder.nix
@@ -12,6 +12,7 @@
...
}: let
secrets = import ./extneder-secrets.nix;
+ svc = config.system.service;
in rec {
boot = {
tftp = {
@@ -23,6 +24,7 @@ in rec {
imports = [
"${modulesPath}/profiles/wap.nix"
"${modulesPath}/vlan"
+ "${modulesPath}/ssh"
];
hostname = "extneder";
@@ -45,6 +47,7 @@ in rec {
};
};
+ services.sshd = svc.ssh.build {};
users.root.passwd = lib.mkForce secrets.root.passwd;
defaultProfile.packages = with pkgs; [nftables strace tcpdump swconfig];
}
diff --git a/examples/rotuer.nix b/examples/rotuer.nix
@@ -6,23 +6,18 @@
# problems.
-{ config, pkgs, lib, ... } :
+{ config, pkgs, lib, modulesPath, ... } :
let
secrets = {
domainName = "fake.liminix.org";
firewallRules = {};
} // (import ./rotuer-secrets.nix);
- inherit (pkgs.liminix.services) oneshot longrun bundle;
+ inherit (pkgs.liminix.services) oneshot bundle;
inherit (pkgs) serviceFns;
svc = config.system.service;
wirelessConfig = {
country_code = "GB";
inherit (secrets) wpa_passphrase;
- auth_algs = 1; # 1=wpa2, 2=wep, 3=both
- wpa = 2; # 1=wpa, 2=wpa2, 3=both
- wpa_key_mgmt = "WPA-PSK";
- wpa_pairwise = "TKIP CCMP"; # auth for wpa (may not need this?)
- rsn_pairwise = "CCMP"; # auth for wpa2
wmm_enabled = 1;
};
@@ -36,65 +31,64 @@ in rec {
};
imports = [
- ../modules/wlan.nix
- ../modules/network
- ../modules/ppp
- ../modules/dnsmasq
- ../modules/dhcp6c
- ../modules/firewall
- ../modules/hostapd
- ../modules/bridge
- ../modules/ntp
- ../modules/schnapps
- ../modules/ssh
- ../modules/outputs/btrfs.nix
- ../modules/outputs/extlinux.nix
+ "${modulesPath}/profiles/gateway.nix"
+ "${modulesPath}/schnapps"
+ "${modulesPath}/outputs/btrfs.nix"
+ "${modulesPath}/outputs/extlinux.nix"
];
hostname = "rotuer";
rootfsType = "btrfs";
rootOptions = "subvol=@";
boot.loader.extlinux.enable = true;
- services.hostap = svc.hostapd.build {
- interface = config.hardware.networkInterfaces.wlan;
- params = {
- ssid = secrets.ssid;
- hw_mode="g";
- channel = "2";
- ieee80211n = 1;
- } // wirelessConfig;
- };
-
- services.hostap5 = svc.hostapd.build {
- interface = config.hardware.networkInterfaces.wlan5;
- params = rec {
- ssid = "${secrets.ssid}5";
- hw_mode="a";
- channel = 36;
- ht_capab = "[HT40+]";
- vht_oper_chwidth = 1;
- vht_oper_centr_freq_seg0_idx = channel + 6;
- ieee80211n = 1;
- ieee80211ac = 1;
- } // wirelessConfig;
- };
-
- services.int = svc.network.address.build {
- interface = svc.bridge.primary.build { ifname = "int"; };
- family = "inet"; address ="${secrets.lan.prefix}.1"; prefixLength = 24;
- };
-
- services.bridge = svc.bridge.members.build {
- primary = services.int;
- members = with config.hardware.networkInterfaces;
- [ wlan
- wlan5
- lan0
- lan1
- lan2
- lan3
- lan4
- ];
+ profile.gateway = {
+ lan = {
+ interfaces = with config.hardware.networkInterfaces;
+ [
+ wlan wlan5
+ lan0 lan1 lan2 lan3 lan4
+ ];
+ inherit (secrets.lan) prefix;
+ address = {
+ family = "inet"; address ="${secrets.lan.prefix}.1"; prefixLength = 24;
+ };
+ dhcp = {
+ start = 10;
+ end = 240;
+ hosts = { } // lib.optionalAttrs (builtins.pathExists ./static-leases.nix) (import ./static-leases.nix);
+ localDomain = "lan";
+ };
+ };
+ wan = {
+ interface = config.hardware.networkInterfaces.wan;
+ username = secrets.l2tp.name;
+ password = secrets.l2tp.password;
+ dhcp6.enable = true;
+ };
+ firewall = {
+ enable = true;
+ rules =
+ let defaults = import ./demo-firewall.nix;
+ in lib.recursiveUpdate defaults secrets.firewallRules;
+ };
+ wireless.networks = {
+ "${secrets.ssid}" = {
+ interface = config.hardware.networkInterfaces.wlan;
+ hw_mode="g";
+ channel = "2";
+ ieee80211n = 1;
+ } // wirelessConfig;
+ "${secrets.ssid}5" = rec {
+ interface = config.hardware.networkInterfaces.wlan5;
+ hw_mode="a";
+ channel = 36;
+ ht_capab = "[HT40+]";
+ vht_oper_chwidth = 1;
+ vht_oper_centr_freq_seg0_idx = channel + 6;
+ ieee80211n = 1;
+ ieee80211ac = 1;
+ } // wirelessConfig;
+ };
};
services.ntp = svc.ntp.build {
@@ -106,95 +100,6 @@ in rec {
users.root = secrets.root;
- services.dns =
- let interface = services.int;
- in svc.dnsmasq.build {
- resolvconf = services.resolvconf;
- inherit interface;
- ranges = [
- "${secrets.lan.prefix}.10,${secrets.lan.prefix}.240"
- # ra-stateless: sends router advertisements with the O and A
- # bits set, and provides a stateless DHCP service. The client
- # will use a SLAAC address, and use DHCP for other
- # configuration information.
- "::,constructor:$(output ${interface} ifname),ra-stateless"
- ];
-
- # You can add static addresses for the DHCP server here. I'm
- # not putting my actual MAC addresses in a public git repo ...
- hosts = { } // lib.optionalAttrs (builtins.pathExists ./static-leases.nix) (import ./static-leases.nix);
- upstreams = [ "/${secrets.domainName}/" ];
- domain = secrets.domainName;
- };
-
- services.wan = svc.pppoe.build {
- interface = config.hardware.networkInterfaces.wan;
- ppp-options = [
- "debug" "+ipv6" "noauth"
- "name" secrets.l2tp.name
- "password" secrets.l2tp.password
- ];
- };
-
- services.resolvconf = oneshot rec {
- dependencies = [ services.wan ];
- name = "resolvconf";
- up = ''
- . ${serviceFns}
- ( in_outputs ${name}
- echo "nameserver $(output ${services.wan} ns1)" > resolv.conf
- echo "nameserver $(output ${services.wan} ns2)" >> resolv.conf
- chmod 0444 resolv.conf
- )
- '';
- };
-
- filesystem =
- let inherit (pkgs.pseudofile) dir symlink;
- in dir {
- etc = dir {
- "resolv.conf" = symlink "${services.resolvconf}/.outputs/resolv.conf";
- };
- };
-
- services.defaultroute4 = svc.network.route.build {
- via = "$(output ${services.wan} address)";
- target = "default";
- dependencies = [ services.wan ];
- };
-
- services.defaultroute6 = svc.network.route.build {
- via = "$(output ${services.wan} ipv6-peer-address)";
- target = "default";
- interface = services.wan;
- };
-
- services.firewall = svc.firewall.build {
- ruleset =
- let defaults = import ./demo-firewall.nix;
- in lib.recursiveUpdate defaults secrets.firewallRules;
- };
-
- services.packet_forwarding = svc.network.forward.build { };
-
- services.dhcp6c =
- let client = svc.dhcp6c.client.build {
- interface = services.wan;
- };
- in bundle {
- name = "dhcp6c";
- contents = [
- (svc.dhcp6c.prefix.build {
- inherit client;
- interface = services.int;
- })
- (svc.dhcp6c.address.build {
- inherit client;
- interface = services.wan;
- })
- ];
- };
-
defaultProfile.packages = with pkgs; [
min-collect-garbage
nftables
diff --git a/modules/profiles/gateway.nix b/modules/profiles/gateway.nix
@@ -0,0 +1,178 @@
+{ config, pkgs, lib, ... } :
+let
+ svc = config.system.service;
+ cfg = config.profile.gateway;
+ inherit (lib) mkOption mkEnableOption mkIf mdDoc types optional optionals;
+ inherit (pkgs) liminix serviceFns;
+ inherit (liminix.services) bundle oneshot;
+ hostaps =
+ let
+ defaults = {
+ auth_algs = 1; # 1=wpa2, 2=wep, 3=both
+ wpa = 2; # 1=wpa, 2=wpa2, 3=both
+ wpa_key_mgmt = "WPA-PSK";
+ wpa_pairwise = "TKIP CCMP"; # auth for wpa (may not need this?)
+ rsn_pairwise = "CCMP"; # auth for wpa2
+ };
+ in lib.mapAttrs'
+ (name : value :
+ let
+ attrs = defaults // { ssid = name; } // value;
+ in lib.nameValuePair
+ "hostap-${name}"
+ (svc.hostapd.build {
+ interface = attrs.interface;
+ params = lib.filterAttrs (k: v: k != "interface") attrs;
+ }))
+ cfg.wireless.networks;
+in {
+
+ options.profile.gateway = {
+ lan = {
+ interfaces = mkOption {
+ type = types.listOf liminix.lib.types.interface;
+ default = [];
+ };
+ address = mkOption {
+ type = types.attrs;
+ };
+ prefix = mkOption { type = types.str; };
+ dhcp = {
+ start = mkOption { type = types.int; };
+ end = mkOption { type = types.int; };
+ hosts = mkOption { type = types.attrs; };
+ localDomain = mkOption { type = types.str; };
+ };
+ };
+
+ firewall = {
+ enable = mkEnableOption "firewall";
+ rules = mkOption { type = types.attrsOf types.attrs; };
+ };
+
+ wan = {
+ interface = mkOption { type = liminix.lib.types.interface; };
+ username = mkOption { type = types.str; };
+ password = mkOption { type = types.str; };
+ dhcp6.enable = mkOption { type = types.bool; };
+ };
+
+ wireless = mkOption {
+ type = types.attrsOf types.anything;
+ };
+ };
+
+ imports = [
+ ../wlan.nix
+ ../network
+ ../ppp
+ ../dnsmasq
+ ../dhcp6c
+ ../firewall
+ ../hostapd
+ ../bridge
+ ../ntp
+ ../ssh
+ { config.services = hostaps; }
+ ];
+
+ config = {
+ services.int = svc.network.address.build ({
+ interface = svc.bridge.primary.build { ifname = "int"; };
+ } // cfg.lan.address);
+
+ services.bridge = svc.bridge.members.build {
+ primary = config.services.int;
+ members = cfg.lan.interfaces;
+ };
+
+ services.wan = svc.pppoe.build {
+ inherit (cfg.wan) interface;
+ ppp-options = [
+ "debug" "+ipv6" "noauth"
+ "name" cfg.wan.username
+ "password" cfg.wan.password
+ ];
+ };
+
+ services.packet_forwarding = svc.network.forward.build { };
+
+ services.dhcp6c =
+ let
+ client = svc.dhcp6c.client.build {
+ interface = config.services.wan;
+ };
+ bundl = bundle {
+ name = "dhcp6c";
+ contents = [
+ (svc.dhcp6c.prefix.build {
+ inherit client;
+ interface = config.services.int;
+ })
+ (svc.dhcp6c.address.build {
+ inherit client;
+ interface = config.services.wan;
+ })
+ ];
+ };
+ in mkIf cfg.wan.dhcp6.enable bundl;
+
+ services.dns =
+ let interface = config.services.int;
+ dcfg = cfg.lan.dhcp;
+ in svc.dnsmasq.build {
+ resolvconf = config.services.resolvconf;
+ inherit interface;
+ ranges = [
+ "${cfg.lan.prefix}.${toString dcfg.start},${cfg.lan.prefix}.${toString dcfg.end}"
+ # ra-stateless: sends router advertisements with the O and A
+ # bits set, and provides a stateless DHCP service. The client
+ # will use a SLAAC address, and use DHCP for other
+ # configuration information.
+ "::,constructor:$(output ${interface} ifname),ra-stateless"
+ ];
+
+ hosts = dcfg.hosts;
+ upstreams = [ "/${dcfg.localDomain}/" ];
+ domain = dcfg.localDomain;
+ };
+
+ services.defaultroute4 = svc.network.route.build {
+ via = "$(output ${config.services.wan} address)";
+ target = "default";
+ dependencies = [ config.services.wan ];
+ };
+
+ services.defaultroute6 = svc.network.route.build {
+ via = "$(output ${config.services.wan} ipv6-peer-address)";
+ target = "default";
+ interface = config.services.wan;
+ };
+
+ services.firewall = mkIf cfg.firewall.enable
+ (svc.firewall.build {
+ ruleset = cfg.firewall.rules;
+ });
+
+ services.resolvconf = oneshot rec {
+ dependencies = [ config.services.wan ];
+ name = "resolvconf";
+ up = ''
+ . ${serviceFns}
+ ( in_outputs ${name}
+ echo "nameserver $(output ${config.services.wan} ns1)" > resolv.conf
+ echo "nameserver $(output ${config.services.wan} ns2)" >> resolv.conf
+ chmod 0444 resolv.conf
+ )
+ '';
+ };
+
+ filesystem =
+ let inherit (pkgs.pseudofile) dir symlink;
+ in dir {
+ etc = dir {
+ "resolv.conf" = symlink "${config.services.resolvconf}/.outputs/resolv.conf";
+ };
+ };
+ };
+ }
diff --git a/modules/profiles/wap.nix b/modules/profiles/wap.nix
@@ -40,7 +40,6 @@ in {
../network
../hostapd
../bridge
- ../ssh
{ config.services = hostaps; }
];
@@ -54,7 +53,6 @@ in {
};
};
config = {
- services.sshd = svc.ssh.build {};
services.int = svc.bridge.primary.build {
ifname = "int";