dan
/
liminix
1
0
Fork 5
Code Issues 3 Pull Requests 2 Projects Releases Wiki Activity

tutorial: move the warning nearer to the decision point

first-do-no-arm
Daniel Barlow 2023-09-17 21:53:15 +01:00
parent 6674344021
commit b3a7a2246d
1 changed files with 14 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
doc/tutorial.rst
View File

@ -1,8 +1,8 @@
Getting Started
###############
Tutorial
########
Liminix is very configurable, which can make it initially quite
daunting, especially if you're learning Nix or Linux or networking
daunting - especially if you're learning Nix or Linux or networking
concepts at the same time. In this section we build some "worked
example" Liminix images to introduce the concepts. If you follow the
examples exactly, they should work. If you change things as you go
@ -10,16 +10,6 @@ along, they may work differently or not at all, but the experience
should be educational either way.
.. warning:: The first example we will look at runs under emulation,
so there is no danger of bricking your hardware
device. For the second example you may (if you have
appropriate hardware and choose to do so) flash the
configuration onto an actual router. There is always a
risk of rendering the device unbootable when you do this,
and various ways to recover depending on what went wrong.
We'll write more about that at the appropriate point
Requirements
************
@ -135,9 +125,17 @@ Installing on hardware
For the next example, we're going to install onto an actual hardware
device. These steps have been tested using a GL-iNet GL-MT300A, which
has been chosen for the purpose because it's cheap and easy to
unbrick. Using some other Liminix-supported MIPS hardware device also
*ought* to work here, but you accept the slightly greater bricking
risk if it doesn't.
unbrick if necessary
.. warning:: There is always a risk of rendering your device
unbootable by flashing it with an image that doesn't
work. The GL-MT300A has a builtin "debrick" procedure in
the boot monitor and is also comparatively simple to
attach serial cables to (soldering not required), so it
is lower-risk than some devices. Using some other
Liminix-supported MIPS hardware device also *ought* to
work here, but you accept the slightly greater bricking
risk if it doesn't.
You may want to acquire a `USB TTL serial cable
<https://cpc.farnell.com/ftdi/ttl-232r-rpi/cable-debug-ttl-232-usb-rpi/dp/SC12825?st=usb%20to%20uart%20cable>`_