7e2b0068e6
nixfmt-rfc-style
...
There is nothing in this commit except for the changes made by
nix-shell -p nixfmt-rfc-style --run "nixfmt ."
If this has mucked up your open branches then sorry about that. You
can probably nixfmt them to match before merging
2025-02-10 21:55:08 +00:00
f77da6f14c
remove remaining refs to kexecboot
2025-01-05 17:22:30 +00:00
Arnout Engelen
a89f866bf0
use Linux kernel sources associated with openwrt by default
2024-12-24 12:21:28 +00:00
3357d21d7f
enlarge pmsg buffer to full size of ramoops region
...
4k was a piddly amount and we weren't using the rest of it for
anything else
2024-12-18 21:16:49 +00:00
81f5550bf0
config.logging.persistent enables /dev/pmsg0
...
- whatever's written to /dev/pmsg0 appears as
/sys/fs/pstore/pmsg-ramoops-0 after reboot
- only works on devices with the relevant device tree
support (gl-ar750 and whatever has it by default)
- nothing in the system is actually writing this file yet
- or reading it at boot time, for that matter
2024-12-17 23:24:31 +00:00
44caefcd3b
rename config.hardware.dts.includes -> includePaths
...
(1) it's a better name
(2) I want to use `includes` to specify dtsi files
2024-12-17 17:41:53 +00:00
5751058d59
gl-ar750 swap lan and wan
...
I don't know if I just got it wrong the first time or if something
weird is going on
2024-07-08 21:19:30 +01:00
e94bf62ec1
remove dead code (run deadnix)
2024-06-29 22:59:27 +01:00
0d49f0f7a7
gl-ar750 appendDTB
2024-05-22 18:47:16 +01:00
e64390460a
memorable net device names for gl-ar750
...
linux's view of eth1 and eth0 are opposite to that of u-boot
2024-05-22 18:47:08 +01:00
ca64e9035e
gl-ar750 ath9k needs cal data from MTD
2024-02-16 20:44:56 +00:00
b5722a0153
gl-ar750: ath10k wireless depends on firmware
...
so make sure the firmware is present _first_
the ath10k is still broken anyway, looking into why
2024-02-16 00:38:36 +00:00
8ac848b1e6
ath10k_pci: wifi modules must be modules
2024-02-13 12:56:03 +00:00
65479e206b
use regular kernel not backports for mac80211
...
the kernel on most devices is now newer than the version that the
backported drivers were backported from
2024-02-12 20:41:10 +00:00
Arnout Engelen
04895f9cf6
openwrt: update to v23.05.2
2024-01-25 12:29:03 +01:00
876bd7d8ce
rename flashimage to mtdimage
2023-12-11 19:09:18 +00:00
5eeb277564
move output module imports example -> device
...
The outputs available are a characteristic of the device, not
the example.
2023-12-10 16:38:53 +00:00
f9f4d97bb8
convert flash params to int
2023-11-12 20:39:06 +00:00
abfb35a231
and entryPoint
2023-11-12 18:50:47 +00:00
315907de98
convert hardware loadAddress to int
2023-11-12 18:47:31 +00:00
185117843b
convert tftp.loadAddress from string to int
2023-11-12 18:37:33 +00:00
0131686661
use parseInt for hex values
2023-11-12 18:25:38 +00:00
f61e737b54
improve doc for outputs and hardware
...
Changed my mind about "installer" as a first-class concept, at least
in the current implementation. Not every documented output is an
installer
2023-11-12 17:15:58 +00:00
262efaabe6
doc: put all the u-boot/serial stuff in one place to link from
2023-11-12 17:14:33 +00:00
5e046490de
support links from device pages to their installation methods
2023-11-09 23:02:35 +00:00
e6cb5e319b
extract NETDEVICES kconfig to kernel.nix module
2023-11-05 11:31:23 +00:00
a896c4e31c
rename wlan services for devices with > 1 radio
...
let's standardise on having 2.4GHz radio be "wlan", and
5GHz as "wlan5"
2023-10-07 22:28:57 +01:00
76f03ecf0f
move OF and USE_OF to arch modules
2023-09-30 21:52:13 +01:00
3c483ebd9a
set PARTITION_ADVANCED only in ramdisk module
2023-09-30 21:29:12 +01:00
a30b658999
remove CMDLINE_PARTITION, we don't need it
...
(at least, I think we don't)
2023-09-30 21:20:29 +01:00
1ec7fcc197
remove MTD_CMDLINE_PARTS from per-device config
...
it's enabled in modules/ramdisk, which is required by
flashimage and tftpboot
2023-09-29 21:00:25 +01:00
f9f934b40c
spell GL.iNet consistently in docs
2023-09-28 23:22:54 +01:00
7e13eda490
add hardware device descriptions to doc
...
most of the text is recycled and follows no particular format
2023-09-28 12:17:30 +01:00
3a2f074199
disable 4k flash erase blocks everywhere
2023-09-27 22:10:17 +01:00
f75995e895
introduce modules/arch/{mipsel,mipseb}.nix
...
for settings that are common to all mipse[lb] but would not be shared
with e.g. aarch64 or x86
2023-09-20 17:30:05 +01:00
35c7f1643f
change defaultOutput for hardware devices to flashimage
...
if you're using tftpboot you probably know what you're doing
2023-09-17 17:00:45 +01:00
f7b30939b5
remove service-state when service exits
2023-09-13 22:49:00 +01:00
efa1919e04
move squashfs kernel options into module
2023-08-30 22:59:28 +01:00
31f0213b6f
convert network link/address to module-based-service
...
... and make bridge use it.
We also had to convert bridge back into a pair of services.
Downstreams want to depend on the bridge it self being configured
even if not necessarily all the members are up. e.g. don't want
to break ssh on lan if there's a misconfigured wlan device
2023-08-28 22:02:28 +01:00
2e50368bd2
rename config.outputs to config.system.outputs
...
New rules: everything under "config" that isn't actually configuration
(e.g. build products) will in future live in config.system. This is
the first step.
2023-07-13 19:24:59 +01:00
3dd247a719
update arch for gl-ar750
...
not sure this is needed, tbh
2023-06-20 20:11:25 +01:00
19212b1eeb
add funky dd features reqd by ath10k_cal_data
2023-05-30 18:20:42 +01:00
4cfaed7303
specify root device as /dev/mtdblockn
...
the (openwrt?) magic that autodetects it based on mtd labels
won't work with a two-stage boot
2023-04-26 22:16:15 +01:00
0a2881914b
set erase block size to something that works for jffs2
2023-04-10 22:57:50 +01:00
633a4f8003
move BLK_DEV_INITRD to base.nix
2023-04-10 22:57:50 +01:00
beb6e260d4
PoC support for hardware watchdog
2023-03-23 13:18:05 +00:00
efd878dc5e
extract common code for patching kernel source fdorm openwrt
2023-03-18 19:17:58 +00:00
ce05f4e44c
extract phram.mtd ramdisk support from tftpboot module
...
also rename tftproot output to tftpboot for consistency
2023-03-18 14:30:10 +00:00
3f11a3c708
gl-ar750 gpio support is required for USB to work
...
_legacy_ gpio sysfs interface is required by the openwrt
ath79 phy usb driver
2023-03-18 14:30:10 +00:00
e8d5e4c788
move regulatory.db to wlan module
2023-03-07 21:32:21 +00:00
