extract extneder example to a "profile"

this is a bit of an experiment to reduce the copy-paste in
examples by turning them into "application" modules.

planning to follow up with another module for "wifi router"

examples/extneder.nix

@@ -11,10 +11,6 @@
   ...
 }: let
   secrets = import ./extneder-secrets.nix;
-  inherit (pkgs.liminix.services) oneshot longrun bundle target;
-  inherit (pkgs.pseudofile) dir symlink;
-  inherit (pkgs) dropbear ifwait serviceFns;
-  svc = config.system.service;
 in rec {
   boot = {
     tftp = {
@@ -24,12 +20,8 @@ in rec {
   };
 
   imports = [
-    ../modules/wlan.nix
+    ../modules/profiles/wap.nix
     ../modules/vlan
-    ../modules/network
-    ../modules/hostapd
-    ../modules/bridge
-    ../modules/ssh
   ];
 
   hostname = "extneder";
@@ -69,68 +61,24 @@ in rec {
     };
   };
 
-  services.hostap = svc.hostapd.build {
-    interface = config.hardware.networkInterfaces.wlan;
-    params = {
-      country_code = "GB";
-      hw_mode = "g";
-      wmm_enabled = 1;
-      ieee80211n = 1;
-      inherit (secrets) ssid channel wpa_passphrase;
-      auth_algs = 1; # 1=wpa2, 2=wep, 3=both
-      wpa = 2; # 1=wpa, 2=wpa2, 3=both
-      wpa_key_mgmt = "WPA-PSK";
-      wpa_pairwise = "TKIP CCMP"; # auth for wpa (may not need this?)
-      rsn_pairwise = "CCMP"; # auth for wpa2
-    };
-  };
-
-  services.int = svc.bridge.primary.build {
-    ifname = "int";
-  };
-
-  services.dhcpc = svc.network.dhcp.client.build {
-    interface = services.int;
-    dependencies = [ config.services.hostname ];
-  };
-
-  services.bridge = svc.bridge.members.build {
-    primary = services.int;
-    members = with config.hardware.networkInterfaces; [
+  profile.wap = {
+    interfaces =  with config.hardware.networkInterfaces; [
       lan
       wlan
     ];
-  };
 
-  services.sshd = svc.ssh.build {};
-
-  services.resolvconf = oneshot rec {
-    dependencies = [ services.dhcpc ];
-    name = "resolvconf";
-    # CHECK: https://udhcp.busybox.net/README.udhcpc says
-    # 'A list of DNS server' but doesn't say what separates the
-    # list members. Assuming it's a space or other IFS character
-    up = ''
-      . ${serviceFns}
-      ( in_outputs ${name}
-      for i in $(output ${services.dhcpc} dns); do
-        echo "nameserver $i" > resolv.conf
-      done
-      )
-    '';
-  };
-  filesystem = dir {
-    etc = dir {
-      "resolv.conf" = symlink "${services.resolvconf}/.outputs/resolv.conf";
+    wireless = {
+      networks.${secrets.ssid} = {
+        interface = config.hardware.networkInterfaces.wlan;
+        inherit (secrets) channel wpa_passphrase;
+        country_code = "GB";
+        hw_mode = "g";
+        wmm_enabled = 1;
+        ieee80211n = 1;
+      };
     };
   };
 
-  services.defaultroute4 = svc.network.route.build {
-    via = "$(output ${services.dhcpc} router)";
-    target = "default";
-    dependencies = [services.dhcpc];
-  };
-
   users.root.passwd = lib.mkForce secrets.root.passwd;
   defaultProfile.packages = with pkgs; [nftables strace tcpdump swconfig];
 }

modules/all-modules.nix

@@ -31,7 +31,6 @@
    ./ssh
    ./outputs/tftpboot.nix
    ./outputs/ubifs.nix
-   ./ubifs.nix
    ./ubinize.nix
    ./users.nix
    ./vlan

modules/profiles/wap.nix

@@ -0,0 +1,100 @@
+{
+  config,
+  pkgs,
+  lib,
+  ...
+}: let
+  inherit (pkgs) liminix;
+  inherit (lib) mkEnableOption mkOption types isDerivation hasAttr ;
+
+  inherit (pkgs.liminix.services) oneshot longrun bundle target;
+  inherit (pkgs.pseudofile) dir symlink;
+  inherit (pkgs) serviceFns;
+  svc = config.system.service;
+  cfg = config.profile.wap;
+
+  hostaps =
+    let
+      defaults = {
+        auth_algs = 1; # 1=wpa2, 2=wep, 3=both
+        wpa = 2; # 1=wpa, 2=wpa2, 3=both
+        wpa_key_mgmt = "WPA-PSK";
+        wpa_pairwise = "TKIP CCMP"; # auth for wpa (may not need this?)
+        rsn_pairwise = "CCMP"; # auth for wpa2
+      };
+    in lib.mapAttrs'
+      (name : value :
+        let
+          attrs = defaults // { ssid = name; } // value;
+        in lib.nameValuePair
+          "hostap-${name}"
+          (svc.hostapd.build {
+            interface = attrs.interface;
+            params = lib.filterAttrs (k: v: k != "interface") attrs;
+          }))
+      cfg.wireless.networks;
+
+in {
+  imports = [
+    ../wlan.nix
+    ../network
+    ../hostapd
+    ../bridge
+    ../ssh
+    { config.services = hostaps; }
+  ];
+
+  options.profile.wap = {
+    interfaces = mkOption {
+      type = types.listOf liminix.lib.types.interface;
+      default = [];
+    };
+    wireless = mkOption {
+      type = types.attrsOf types.anything;
+    };
+  };
+  config = {
+    services.sshd = svc.ssh.build {};
+
+    services.int = svc.bridge.primary.build {
+      ifname = "int";
+    };
+
+    services.bridge = svc.bridge.members.build {
+      primary = config.services.int;
+      members = cfg.interfaces;
+    };
+
+    services.dhcpc = svc.network.dhcp.client.build {
+      interface = config.services.int;
+      dependencies = [ config.services.hostname ];
+    };
+
+    services.defaultroute4 = svc.network.route.build {
+      via = "$(output ${config.services.dhcpc} router)";
+      target = "default";
+      dependencies = [config.services.dhcpc];
+    };
+
+    services.resolvconf = oneshot rec {
+      dependencies = [ config.services.dhcpc ];
+      name = "resolvconf";
+      # CHECK: https://udhcp.busybox.net/README.udhcpc says
+      # 'A list of DNS server' but doesn't say what separates the
+      # list members. Assuming it's a space or other IFS character
+      up = ''
+        . ${serviceFns}
+        ( in_outputs ${name}
+        for i in $(output ${config.services.dhcpc} dns); do
+          echo "nameserver $i" > resolv.conf
+        done
+        )
+      '';
+    };
+    filesystem = dir {
+      etc = dir {
+        "resolv.conf" = symlink "${config.services.resolvconf}/.outputs/resolv.conf";
+      };
+    };
+  };
+}