boot.expect

@@ -15,7 +15,6 @@ proc waitprompt { } {
 
 proc sendline { line } {
      send "$line; echo \$ready \r"
-     sleep 0.1
 }
 
 log_user 0
@@ -23,10 +22,7 @@ log_file -a -open stderr
 
 set f [open "result/boot.scr"]
 
-send "setenv ready REA\r"
-sleep 0.1
-send "setenv ready \${ready}DY\r"
-sleep 0.1
+send "setenv ready REA\rsetenv ready \${ready}DY\r"
 
 set timeout 300
 expect_before timeout abort

devices/belkin-rt3200/default.nix

@@ -7,6 +7,12 @@
     and is mostly feature-complete in Liminix but as of Dec 2024
     has seen very little actual use.
 
+    .. note:: The factory flash image contains ECC errors that make it
+              incompatible with Liminix: use the `OpenWrt
+              UBI Installer <https://github.com/dangowrt/owrt-ubi-installer>`_ to
+              rewrite the partition layout before you can use
+              Liminix with it
+
     Hardware summary
     ================
 
@@ -32,16 +38,9 @@
     To prepare the device for Liminix you first need to use the
     `OpenWrt UBI Installer
     <https://github.com/dangowrt/owrt-ubi-installer>`_ image to
-    rewrite the flash layout. As of Jan 2025 there are two versions
-    of the installer available: the release version 1.0.2 and the
-    pre-release 1.1.3 and for Liminix you nee the pre-relese.
-    The release version of the installer creates UBI volumes
-    according to an older layout that is not compatible with
-    the Linux 6.6.67 kernel used in Liminix.
-
-    You can run the installer in one of two ways:
+    rewrite the flash layout. You can do this in one of two ways:
     either follow the instructions to do it through the vendor web
-    interface, or you can drop to U-Boot and use TFTP
+    interface, or you can drop to U-boot and use TFTP
 
     .. code-block:: console