62 lines
2.0 KiB
Nix
62 lines
2.0 KiB
Nix
{
|
|
config
|
|
, pkgs
|
|
, lib
|
|
, ...
|
|
}:
|
|
let
|
|
inherit (lib) mkOption types concatStringsSep;
|
|
o = config.system.outputs;
|
|
cfg = config.tplink-safeloader;
|
|
in {
|
|
options.tplink-safeloader = {
|
|
board = mkOption {
|
|
type = types.str;
|
|
};
|
|
};
|
|
options.system.outputs = {
|
|
tplink-safeloader = mkOption {
|
|
type = types.package;
|
|
description = ''
|
|
tplink-safeloader
|
|
*****************
|
|
|
|
For creating 'safeloader' images for tp-link devices.
|
|
|
|
These can be flashed to the device using the firmware update feature
|
|
in the TP-link web UI or the OEM bootloader recovery: Use something
|
|
sharp to hold the 'reset' button while turning on the router until
|
|
only the orange LED remains lit. The router will assume IP address
|
|
192.168.0.1 and expect you to take 192.168.0.5 on one of the LAN ports.
|
|
On NixOS, use something like::
|
|
|
|
networking.interfaces.enp0s20f0u1c2 = {
|
|
ipv4.addresses = [ {
|
|
address = "192.168.0.5";
|
|
prefixLength = 24;
|
|
} ];
|
|
};
|
|
networking.networkmanager = {
|
|
unmanaged = [ "enp0s20f0u1c2" ];
|
|
};
|
|
|
|
This connection is rather somewhat temperamental, it may take a couple
|
|
of attempts, possibly re-attaching the USB dongle and running
|
|
``systemctl restart network-start.service``. The web interface does not
|
|
give accurate feedback (the progress bar is a lie), so you may want
|
|
to upload the firmware using ``curl -F firmware=@result http://192.168.0.1/f2.htm``.
|
|
After this shows a 'success' JSON, the image still needs to be
|
|
transferred from memory to flash, so be patient.
|
|
'';
|
|
};
|
|
};
|
|
config = {
|
|
system.outputs = rec {
|
|
tplink-safeloader =
|
|
pkgs.runCommand "tplink" { nativeBuildInputs = with pkgs.pkgsBuildBuild; [ firmware-utils ]; } ''
|
|
tplink-safeloader -B "${cfg.board}" -k "${o.uimage}" -r "${o.rootfs}" -o $out
|
|
'';
|
|
};
|
|
};
|
|
}
|