liminix/modules/cdc-ncm/wwan.nix

69 lines
2.0 KiB
Nix

{
liminix
, usb-modeswitch
, ppp
, lib
, svc
, uevent-watch
}:
{ apn, username, password, authType }:
let
inherit (liminix.services) bundle longrun oneshot;
authTypeNum = if authType == "pap" then "1" else "2";
chat = lib.escapeShellArgs [
# Your usb modem thing might present as a tty that you run PPP
# over, or as a network device ("ndis" or "ncm"). The latter
# kind is to be preferred, at least in principle, because it's
# faster. This initialization sequence works for the Huawei
# E3372, and took much swearing: the error messages are *awful*
"" "AT"
"OK" "ATZ"
# create PDP context
"OK" "AT+CGDCONT=1,\"IP\",\"${apn}\""
# activate PDP context
"OK" "AT+CGACT=1,1"
# setup username and password per requirements of sim provider.
# (caret is special to chat, so needs escaping in AT commands)
"OK" "AT\\^AUTHDATA=1,${authTypeNum},\"\",\"${password}\",\"${username}\""
# start the thing (I am choosing to read this as "NDIS DialUP")
"OK" "AT\\^NDISDUP=1,1"
"OK"
];
modeswitch = oneshot rec {
name = "modem-modeswitch";
controller = (svc.uevent-rule.build {
serviceName = name;
terms = { devtype = "usb_device"; product = "12d1/14fe/102"; };
});
up = ''
${usb-modeswitch}/bin/usb_modeswitch -v 12d1 -p 14fe --huawei-new-mode
'';
};
atz = oneshot rec {
name = "modem-atz";
dependencies = [ modeswitch ];
controller = (svc.uevent-rule.build {
serviceName = name;
terms = {
subsystem = "tty";
attrs = {
idVendor = "12d1";
idProduct = "1506";
};
};
symlink = "/dev/modem";
});
# XXX need an ip-up script here to collect the IP address
up = ''
ls -l /dev/modem
test -L /dev/modem || exit 1
${ppp}/bin/chat -s -v ${chat} 0<>/dev/modem 1>&0
'';
down = "${ppp}/bin/chat -v '' ATZ OK 0<>/dev/modem 1>&0";
};
in svc.network.link.build {
ifname = "wwan0";
dependencies = [ atz ];
}