linuxhackerman
/
liminix
forked from dan/liminix
1
0
Fork 0
Code Pull Requests Activity

fix section order

This commit is contained in:
Daniel Barlow 2023-07-09 15:18:19 +01:00
parent 2d05695d99
commit 0f57ae2a32
1 changed files with 19 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

37
doc/user.rst
View File

@ -157,23 +157,6 @@ works we can flash the image - and if it doesn't work we can reboot
the device again and it will boot from the old image. the device again and it will boot from the old image.
Flashing from OpenWrt (not currently advised!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.. CAUTION:: At your own risk! This may in some circumstances lead to
bricking the device: we think this flash method is currently
incompatible with use of a writeable (jffs2) filesystem.
If your device is running OpenWrt then it probably has the
:command:`mtd` command installed. After transferring the image onto the
device using e.g. :command:`ssh`, you can run it as follows:
.. code-block:: console
mtd -r write /tmp/firmware.bin firmware
For more information, please see the `OpenWrt manual <https://openwrt.org/docs/guide-user/installation/sysupgrade.cli>`_ which may also contain (hardware-dependent) instructions on how to flash an image using the vendor firmware - perhaps even from a web interface.
Building the RAM-based image Building the RAM-based image
............................ ............................
@ -258,10 +241,28 @@ crash in surprising ways.
Flashing from OpenWrt (not currently advised!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.. CAUTION:: At your own risk! This will (at least in some
circumstances) lead to bricking the device: we think this
flash method is currently incompatible with use of a
writeable (jffs2) filesystem.
If your device is running OpenWrt then it probably has the
:command:`mtd` command installed. After transferring the image onto the
device using e.g. :command:`ssh`, you can run it as follows:
.. code-block:: console
mtd -r write /tmp/firmware.bin firmware
For more information, please see the `OpenWrt manual <https://openwrt.org/docs/guide-user/installation/sysupgrade.cli>`_ which may also contain (hardware-dependent) instructions on how to flash an image using the vendor firmware - perhaps even from a web interface.
Updating an installed system (JFFS2) Updating an installed system (JFFS2)
************************************ ************************************
Adding packages Adding packages
=============== ===============