commit f9f934b40c6c9618d4aa77dd9c3691845b288073
parent e3c8ab351e5b62af1a3adc5d81d6ad1a559fd8e0
Author: Daniel Barlow <dan@telent.net>
Date: Thu, 28 Sep 2023 23:19:32 +0100
spell GL.iNet consistently in docs
Diffstat:
4 files changed, 20 insertions(+), 12 deletions(-)
diff --git a/devices/gl-ar750/default.nix b/devices/gl-ar750/default.nix
@@ -18,7 +18,7 @@
};
description = ''
- GL.INet GL-AR750
+ GL.iNet GL-AR750
****************
The GL-AR750 "Creta" travel router features:
@@ -30,7 +30,7 @@
- 16MB NOR Flash
- supported in OpenWrt by the "ath79" SoC family
- As with many GL.INet devices, the stock vendor firmware
+ As with many GL.iNet devices, the stock vendor firmware
is a fork of OpenWrt, meaning that the plain binary
``firmware.bin`` that Liminix builds can be flashed using the
vendor web UI and the U-Boot emergency "unbrick" routine
diff --git a/devices/gl-mt300a/default.nix b/devices/gl-mt300a/default.nix
@@ -1,4 +1,4 @@
-# GL.INet GL-MT300A
+# GL.iNet GL-MT300A
{
system = {
@@ -12,12 +12,12 @@
};
description = ''
- GL.Inet GL-MT300A
+ GL.iNet GL-MT300A
********************
The GL-MT300A is based on a MT7620 chipset.
- The GL-Inet pocket router range makes nice cheap hardware for
+ The GL.iNet pocket router range makes nice cheap hardware for
playing with Liminix or similar projects. The manufacturers seem
open to the DIY market, and the devices have a reasonable amount
of RAM and are much easier to get serial connections than many
@@ -47,6 +47,12 @@
expects firmware to be present in the "factory" MTD partition, so
- assuming we want to use the wireless - we need to build MTD
support into the kernel even if we're using TFTP root.
+
+
+ Vendor web page: https://www.gl-inet.com/products/gl-mt300a/
+
+ OpenWrt web page: https://openwrt.org/toh/gl.inet/gl-mt300a
+
'';
module = { pkgs, config, lib, ...}:
diff --git a/devices/gl-mt300n-v2/default.nix b/devices/gl-mt300n-v2/default.nix
@@ -1,5 +1,3 @@
-# GL.INet GL-MT300N v2
-
{
system = {
crossSystem = {
@@ -12,13 +10,18 @@
};
description = ''
- GL.Inet GL-MT300N-v2
+ GL.iNet GL-MT300N-v2
********************
The GL-MT300N-v2 "Mango" is is very similar to the MT300A, but is
based on MT7628 instead of MT7620. It's also marginally cheaper
and comes in a yellow case not a blue one. It's different again
to the v1, which has only half the RAM.
+
+ Vendor web page: https://www.gl-inet.com/products/gl-mt300n-v2/
+
+ OpenWrt web page: https://openwrt.org/toh/gl.inet/gl-mt300n_v2
+
'';
module = { pkgs, config, lib, ...}:
diff --git a/doc/tutorial.rst b/doc/tutorial.rst
@@ -123,9 +123,9 @@ Installing on hardware
**********************
For the next example, we're going to install onto an actual hardware
-device. These steps have been tested using a GL-iNet GL-MT300A, which
+device. These steps have been tested using a GL.iNet GL-MT300A, which
has been chosen for the purpose because it's cheap and easy to
-unbrick if necessary
+unbrick if necessary.
.. warning:: There is always a risk of rendering your device
unbootable by flashing it with an image that doesn't
@@ -227,8 +227,7 @@ example, but this time for real.
with some imagination could probably still do something
awful using it.
-Congratulations Part II! You have installed your first Liminix system on
-actual hardware - albeit that it *still* has no practical use.
+Congratulations Part II! You have installed your first Liminix system on actual hardware - albeit that it *still* has no practical use.
Exercise for the reader: change the default password by editing
:file:`examples/hello-from-mt300.nix`, and then create and upload a
