44a0cf364b
remove boot-scr output, merge into tftpboot
...
(1) it creates two things (script and dtb); (2) it's a bit pointless
without the tftpboot output it depends on
2023-12-22 21:37:15 +00:00
c7b2733bea
tftpbootlz: put command line in dtb
...
this makes boot.scr substantially shorter, in anticipation of using it
for first boot of the omnia and not wanting to embed an essay in
a setenv value
2023-12-22 20:09:44 +00:00
dfbc72dd51
tftpboot test: fix reserved-memory dt for aarch64
2023-12-22 17:37:53 +00:00
231c2cef03
make reserved-memory work on mips, and improve test
2023-12-21 22:21:20 +00:00
32c13c46bb
support aarch64 in tftpboot test
2023-12-19 12:12:12 +00:00
9ca9723c9d
make rootfs work with tftpbootlz
2023-12-17 19:39:26 +00:00
d1e2d525a4
tftpboot omnia using bootz not bootm
...
because kernel size is now beyond the u-boot size
limit for bootm
2023-12-16 23:40:55 +00:00
80528376a2
move o.systemConfiguration to initramfs module
...
as far as I can tell, we define it identically in every module
that uses initramfs
2023-12-11 21:47:15 +00:00
d707345891
rename rootfsFiles to rootdir, add bootablerootdir
2023-12-11 21:21:12 +00:00
601bb289ee
rename diskimage to mbrimage
2023-12-11 19:09:19 +00:00
876bd7d8ce
rename flashimage to mtdimage
2023-12-11 19:09:18 +00:00
4ddce6e926
fix the tests we broke
2023-12-10 17:12:57 +00:00
5eeb277564
move output module imports example -> device
...
The outputs available are a characteristic of the device, not
the example.
2023-12-10 16:38:53 +00:00
c81e7c4d35
move all output modules to subdirectory, trash standard.nix
...
standard.nix isn't, is the essence here. Not all devices
support flashimage as it is currently defined - some
have diskimage, some have neither
2023-12-10 15:23:12 +00:00
4229b42d82
make config.hardware.dts.src nullable
...
This is for QEMU where we won't have to provide a dtb because the
device tree is built by the platform according the (emulated) hardware
present.
Maybe in future there will be other hardware devices where we
don't need to provide a dtb.
2023-12-09 15:51:30 +00:00
03b17fa3ed
add zImage output
2023-12-07 22:31:26 +00:00
a8891461aa
use devtmpfs in initramfs
...
static device nodes don't work with virtio
2023-12-07 20:03:03 +00:00
5adfb0230f
WIP generate bootable disk image with partition table
2023-12-05 23:54:09 +00:00
3f74fad966
don't double-json the command line
2023-12-05 17:32:18 +00:00
ed925588f7
extract common code to make root filesystem hierarchy
...
which is then used by the filesystem image creators (ubifs, ext4,
jffs2 etc)
2023-12-05 17:32:18 +00:00
98d3336926
rewrite run-liminix-vm as a fennel program
...
the effect of shell quoting/word splitting rules was reaching
completely unreasonable, insofar as I was unable to reason about it
2023-12-03 22:51:39 +00:00
bb335050fd
derivation that produces /boot
2023-12-02 15:31:55 +00:00
e518ab667b
make job control work in console shell
2023-11-29 19:49:51 +00:00
cc73a98419
support setting network device names
...
this means that net devices in devices/foo/default.nix can be
specified by their sysfs paths (instead of by "eth0" and "eth1" that
may change from one kernel version to the next) and given mnenomic
names that are helpful for the hardware. Like "wan" and "lan[1..4]"
2023-11-26 23:15:28 +00:00
27ce61ae4e
add bootable config for Turris Omnia
2023-11-24 23:29:12 +00:00
3df34428d6
remove unneeded login and getty applets
2023-11-23 20:01:13 +00:00
62c788eb86
add hook to run maintenance mode instead of rebooting
2023-11-22 00:05:55 +00:00
bab6d346a8
add .../s6/bin to PATH for shutdownd
2023-11-22 00:05:03 +00:00
a202ae476a
extract console redirection stuff from "quit" function
...
so we can use it for scripts that don't reboot at their end
2023-11-21 23:32:37 +00:00
7c9297f91d
use shotdown instead of hpr in .s6-svscan/SIGFOO
...
this is to bring them into line with what more recent
s6-init-linux-maker creates
2023-11-21 23:19:00 +00:00
a0bd250963
switch from getty to root shell on console
...
this just makes things marginally simpler
2023-11-21 23:09:48 +00:00
e5223f093f
kernel.src may be a path not just a package
...
this makes it easier to hack the kernel locally and test things
2023-11-18 14:21:18 +00:00
f9f4d97bb8
convert flash params to int
2023-11-12 20:39:06 +00:00
abfb35a231
and entryPoint
2023-11-12 18:50:47 +00:00
315907de98
convert hardware loadAddress to int
2023-11-12 18:47:31 +00:00
185117843b
convert tftp.loadAddress from string to int
2023-11-12 18:37:33 +00:00
3da692f7ef
don't import flashimage unconditionally, it breaks qemu
2023-11-12 18:11:13 +00:00
f61e737b54
improve doc for outputs and hardware
...
Changed my mind about "installer" as a first-class concept, at least
in the current implementation. Not every documented output is an
installer
2023-11-12 17:15:58 +00:00
7cfb92e3ce
more doc
2023-11-10 21:17:20 +00:00
a9760d239c
basic doc for flashimage installer
2023-11-09 22:43:50 +00:00
7d5c7b9b44
export evaluation from default.nix and use it for docs
2023-11-09 22:14:31 +00:00
23b3a2baef
extract vmroot output into its own file
2023-11-08 23:19:11 +00:00
a9d847e2c0
add ext4 as rootfsType
2023-11-06 21:52:31 +00:00
6489a39424
qemu armv7
2023-11-05 23:19:11 +00:00
c94d12934f
remove direct use of run-liminix-vm from tests and doc
2023-11-05 20:37:23 +00:00
c40eef25d6
qemu: use phram instead of block2mtd
2023-11-05 19:13:51 +00:00
46991e2761
aarch64 ram starts at 0x40000000
2023-11-05 15:33:10 +00:00
a135cb1217
introduce lim, the liminix library
...
so far we have lim.parseInt, which parses an integer from a string
with optional base-selecting-prefix (e.g. 0755, 0x12ab)
2023-11-05 15:13:06 +00:00
863045b86b
added hardware.ram.startAddress config
...
it's not 0 on arm32, so this will be useful for qemu
2023-11-05 15:11:58 +00:00
629624bb25
replace multiway if with pkgs.stdenv.hostPlatform.qemuArch
2023-11-05 11:40:26 +00:00
92b9bf959e
options.system.outputs.initramfs -> initramfs module
2023-11-05 11:33:02 +00:00
e6cb5e319b
extract NETDEVICES kconfig to kernel.nix module
2023-11-05 11:31:23 +00:00
e6ef4f78bb
"ubimage" module contains ubifs image + instructions
...
Presently either you run this from U-Boot or you figure out for
yourself how to kexecboot into a recovery system :-)
2023-10-21 23:20:53 +01:00
f3225c2bd5
delete dup outputs.systemConfiguration
...
perhaps this should go into initramfs.nix not jffs2.nix
2023-10-19 10:09:08 +01:00
629914f65e
initial support for ubifs
2023-10-16 19:55:17 +01:00
364c5faf9e
tftpboot: fix errors in phram partition size calc
2023-10-10 20:26:27 +01:00
bd20f3e419
uimage: make fit optional
2023-10-09 19:47:57 +01:00
f62ad0e1d7
use "tftpboot" instead of "tftp" in u-boot commands
...
openwrt's u-boot installation doesn't accept the short form
2023-10-09 19:47:57 +01:00
c18f07f02f
aarch64: make tftpboot work
...
- patch dtb to add reserved-memory stanza for the phram device to use
(aarch64 does not accept memmap= command line option)
- patch phram driver to use memremap() instead of ioremap() as
ioremap can't be used for system ram on arm devices
2023-10-09 19:47:57 +01:00
dbc16edf96
don't use ttyAMA0 console on all aarch64, just qemu
2023-10-09 19:47:57 +01:00
4df248323c
use MTD_SPI_NOR_USE_4K_SECTORS only on MIPS
2023-10-07 22:41:15 +01:00
caf8e85061
remove USE_OF from aarch64
2023-10-02 22:43:13 +01:00
76f03ecf0f
move OF and USE_OF to arch modules
2023-09-30 21:52:13 +01:00
3a2f074199
disable 4k flash erase blocks everywhere
2023-09-27 22:10:17 +01:00
ab147abd9b
less padding in firmware.bin
...
we only need to align to erase block size, which may be
less than the 128k previously hard-coded
2023-09-26 16:43:03 +01:00
c59a228955
this is the dhcp6c service we want
2023-09-26 16:43:03 +01:00
94e51db649
tests: use run.sh instead of calling run-liminix-vm directly
...
this makes it easier to run tests on aarch64 where
qemu wants an Image file instead of a vmlinux
2023-09-24 00:24:48 +01:00
be22fbbb0a
bootable aarch64 liminux with qemu
...
I may have broken the run-liminix-vm command a bit for MIPS due to
necessary changes in how we pass the command line. If CI isn't green
for this commit and youre trying the worked examples, I suggest
reverting to the commit before this one.
2023-09-20 22:55:51 +01:00
4389fa15f7
rename mips-vm as run-liminix-vm
2023-09-20 18:33:20 +01:00
4f29bdd3ed
detect arch in kernel and uimage
...
also move kernel builder to pkgs/
FIXME we need to straighten out the mess in calling
dtb.nix/uimage.nix
2023-09-20 18:26:33 +01:00
f1c04c7979
extract mips kernel options to module
2023-09-20 17:50:21 +01:00
f75995e895
introduce modules/arch/{mipsel,mipseb}.nix
...
for settings that are common to all mipse[lb] but would not be shared
with e.g. aarch64 or x86
2023-09-20 17:30:05 +01:00
b36272f99e
add outputs for vlan service
2023-09-17 17:00:31 +01:00
0abe4f96a7
ssh ensure we create /run/dropbear
...
this is required if we don't have persistent store (jffs2)
2023-09-17 17:00:26 +01:00
4fd1b5f08b
er, "input" != output"
2023-09-13 18:01:50 +01:00
899f096346
dnsmasq static hosts defaults to empty attrset
2023-09-04 23:02:17 +01:00
0cf4733327
add placeholders for missing module docs
2023-09-04 22:19:22 +01:00
0a6af46364
support dhcp static leases
2023-09-04 22:08:07 +01:00
3bdc986dd7
extract "mount filesystem" to module
2023-09-04 21:17:52 +01:00
83092b7b73
add watchdog service
2023-09-02 17:28:40 +01:00
7ad848cb77
add service to enable packet forwarding
...
might be worth looking into adding RA config to this
2023-09-01 17:34:47 +01:00
e04ec2e959
move SWCONFIG defn into per-device files
...
it doesn't work on qemu
2023-08-31 23:50:07 +01:00
d60aab728d
reinstate loopback network (oops)
2023-08-31 23:29:30 +01:00
3609d8d5ee
implement route as module-based-service
2023-08-31 23:24:23 +01:00
e577caa15f
extneder: use bridge module
2023-08-31 18:29:45 +01:00
7faf620c0b
move loopback config from base to netowrk module
2023-08-31 18:28:35 +01:00
f1dfb1f976
BRIDGE_VLAN_FILTERING depends on bridge _and_ vlan
...
I'm half-pleased with this. It demonstrates how we can have complex
conditional kernel config, but the way we detect if vlan exists is
tacky.
2023-08-31 18:24:09 +01:00
333327be75
make a module for vlan
...
Acked-by: Daniel Barlow <<dan@telent.net>>
2023-08-30 23:26:44 +01:00
efa1919e04
move squashfs kernel options into module
2023-08-30 22:59:28 +01:00
de77635490
move bridge-related kernel config to the module
2023-08-30 17:29:42 +01:00
aecbe08f08
add o+x permission on service-state directories
...
this is needed for resolvconf, which writes resolv.conf as
an output and wants to make it world-readable
2023-08-28 22:02:28 +01:00
ff2d3e1a63
TODO comments
2023-08-28 22:02:28 +01:00
e86daf9bbc
default value for services.default
...
as a default default target, start all the services
2023-08-28 22:02:28 +01:00
00c8ea66ea
add service fir dhcp v4 client
2023-08-28 22:02:28 +01:00
31f0213b6f
convert network link/address to module-based-service
...
... and make bridge use it.
We also had to convert bridge back into a pair of services.
Downstreams want to depend on the bridge it self being configured
even if not necessarily all the members are up. e.g. don't want
to break ssh on lan if there's a misconfigured wlan device
2023-08-28 22:02:28 +01:00
540a1dfd76
remove interface.device
...
build-time uses can mostly be replaced with interface.name
for runtime uses, switch to $(output ${interface} name)
2023-08-28 22:02:28 +01:00
6b28f5dd79
chrony: drop privileges
2023-08-27 22:40:49 +01:00
f4ad4d3ce1
update bridge service doc
2023-08-18 23:58:06 +01:00
6f92f8fa8b
merge bridge services into one
2023-08-16 23:29:53 +01:00
a019e59a80
improve doc
2023-08-16 22:52:16 +01:00
