forked from dan/liminix
369 lines
13 KiB
Nix
369 lines
13 KiB
Nix
{
|
|
description = ''
|
|
Turris Omnia
|
|
************
|
|
|
|
This is a 32 bit ARMv7 MVEBU device, which is usually shipped with
|
|
TurrisOS, an OpenWrt-based system. Rather than reformatting the
|
|
builtin storage, we install Liminix on to the existing btrfs
|
|
filesystem so that the vendor snapshot/recovery system continues
|
|
to work (and provides you an easy rollback if you decide you don't
|
|
like Liminix after all).
|
|
|
|
The install process has two stages, and is intended that you
|
|
should not need to open the device and add a serial console
|
|
(although it may be handy for visibility, and in case anything
|
|
goes wrong). First we build a minimal installation/recovery
|
|
system, then we reboot into that recovery image to prepare the
|
|
device for the full target install.
|
|
|
|
Installation using a USB stick
|
|
==============================
|
|
|
|
First, build the image for the USB stick. Review
|
|
:file:`examples/recovery.nix` in order to change the default
|
|
root password (which is ``secret``) and/or the SSH keys, then
|
|
build it with
|
|
|
|
$ nix-build -I liminix-config=./examples/recovery.nix \
|
|
--arg device "import ./devices/turris-omnia" \
|
|
-A outputs.mbrimage -o mbrimage
|
|
$ file -L mbrimage
|
|
mbrimage: DOS/MBR boot sector; partition 1 : ID=0x83, active, start-CHS (0x0,0,5), end-CHS (0x6,130,26), startsector 4, 104602 sectors
|
|
|
|
Next, copy the image from your build machine to a USB storage
|
|
medium using :command:`dd` or your other most favoured file copying
|
|
tool, which might be a comand something like this:
|
|
|
|
$ dd if=mbrimage of=/dev/path/to/the/usb/stick \
|
|
bs=1M conv=fdatasync status=progress
|
|
|
|
The Omnia's default boot order only checks USB after it has failed
|
|
to boot from eMMC, which is not ideal for our purpose. Unless you
|
|
have a serial cable, the easiest way to change this is by booting
|
|
to TurrisOS and logging in with ssh:
|
|
|
|
root@turris:/# fw_printenv boot_targets
|
|
boot_targets=mmc0 nvme0 scsi0 usb0 pxe dhcp
|
|
root@turris:/# fw_setenv boot_targets usb0 mmc0
|
|
root@turris:/# fw_printenv boot_targets
|
|
boot_targets=usb0 mmc0
|
|
root@turris:/# reboot -f
|
|
|
|
It should now boot into the recovery image. It expects a network
|
|
cable to be plugged into LAN2 with something on the other end of
|
|
it that serves DHCP requests. Check your DHCP server logs for a
|
|
request from a ``liminix-recovery`` host and figure out what IP
|
|
address was assigned.
|
|
|
|
$ ssh liminix-recovery.lan
|
|
|
|
You should get a "Busybox" banner and a root prompt. Now you can
|
|
start preparing the device to install Liminix on it. First we'll
|
|
mount the root filesystem and take a snapshot:
|
|
|
|
# mkdir /dest && mount /dev/mmcblk0p1 /dest
|
|
# schnapps -d /dest create "pre liminix"
|
|
# schnapps -d /dest list
|
|
ERROR: not a valid btrfs filesystem: /
|
|
# | Type | Size | Date | Description
|
|
------+-----------+-------------+---------------------------+------------------------------------
|
|
1 | single | 16.00KiB | 1970-01-01 00:11:49 +0000 | pre liminix
|
|
|
|
(``not a valid btrfs filesystem: /`` is not a real error)
|
|
|
|
then we can remove all the files
|
|
|
|
# rm -r /dest/@/*
|
|
|
|
and then it's ready to install the real Liminix system onto. On
|
|
your build system, create the Liminix configuration you wish to
|
|
install: here we'll use the ``rotuer`` example.
|
|
|
|
build$ nix-build -I liminix-config=./examples/rotuer.nix \
|
|
--arg device "import ./devices/turris-omnia" \
|
|
-A outputs.systemConfiguration
|
|
|
|
and then use :command:`min-copy-closure` to copy it to the device.
|
|
|
|
build$ nix-shell --run \
|
|
"min-copy-closure -r /dest/@ root@liminix-recovery.lan result"
|
|
|
|
and activate it
|
|
|
|
build$ ssh root@liminix-recovery.lan \
|
|
"/dest/@/$(readlink result)/bin/install /dest/@"
|
|
|
|
The final steps are performed directly on the device again: add
|
|
a symlink so U-Boot can find :file:`/boot`, then restore the
|
|
default boot order and reboot into the new configuration.
|
|
|
|
# cd /dest && ln -s @/boot .
|
|
# fw_setenv boot_targets "mmc0 nvme0 scsi0 usb0 pxe dhcp"
|
|
# cd / ; umount /dest
|
|
# reboot
|
|
|
|
|
|
Installation using a TFTP server and serial console
|
|
===================================================
|
|
|
|
If you have a :ref:`serial` console connection and a TFTP server,
|
|
and would rather use them than fiddling with USB sticks, the
|
|
:file:`examples/recovery.nix` configuration also works
|
|
using the ``tftpboot`` output. So you can do
|
|
|
|
build$ nix-build -I liminix-config=./examples/recovery.nix \
|
|
--arg device "import ./devices/turris-omnia" \
|
|
-A outputs.tftpboot
|
|
|
|
and then paste the generated :file:`result/boot.scr` into
|
|
U-Boot, and you will end up with the same system as you would
|
|
have had after booting from USB. If you don't have a serial
|
|
console connection you could probably even get clever with
|
|
elaborate use of :command:`fw_setenv`, but that is left as
|
|
an exercise for the reader.
|
|
|
|
'';
|
|
|
|
system = {
|
|
crossSystem = {
|
|
config = "armv7l-unknown-linux-musleabihf";
|
|
};
|
|
};
|
|
|
|
module = {pkgs, config, lib, lim, ... }:
|
|
let
|
|
openwrt = pkgs.openwrt;
|
|
inherit (lib) mkOption types;
|
|
inherit (pkgs.liminix.services) oneshot;
|
|
inherit (pkgs) liminix;
|
|
mtd_by_name_links = pkgs.liminix.services.oneshot rec {
|
|
name = "mtd_by_name_links";
|
|
up = ''
|
|
mkdir -p /dev/mtd/by-name
|
|
cd /dev/mtd/by-name
|
|
for i in /sys/class/mtd/mtd*[0-9]; do
|
|
ln -s ../../$(basename $i) $(cat $i/name)
|
|
done
|
|
'';
|
|
};
|
|
in {
|
|
imports = [
|
|
../../modules/arch/arm.nix
|
|
../../modules/outputs/tftpboot.nix
|
|
../../modules/outputs/mbrimage.nix
|
|
../../modules/outputs/extlinux.nix
|
|
];
|
|
|
|
config = {
|
|
services.mtd-name-links = mtd_by_name_links;
|
|
kernel = {
|
|
src = pkgs.pkgsBuildBuild.fetchurl {
|
|
name = "linux.tar.gz";
|
|
url = "https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.15.137.tar.gz";
|
|
hash = "sha256-PkdzUKZ0IpBiWe/RS70J76JKnBFzRblWcKlaIFNxnHQ=";
|
|
};
|
|
extraPatchPhase = ''
|
|
${pkgs.openwrt.applyPatches.mvebu}
|
|
'';
|
|
config = {
|
|
PCI = "y";
|
|
OF = "y";
|
|
MEMORY = "y"; # for MVEBU_DEVBUS
|
|
DMADEVICES = "y"; # for MV_XOR
|
|
CPU_V7 = "y";
|
|
ARCH_MULTIPLATFORM = "y";
|
|
ARCH_MVEBU = "y";
|
|
ARCH_MULTI_V7= "y";
|
|
PCI_MVEBU = "y";
|
|
AHCI_MVEBU = "y";
|
|
MACH_ARMADA_38X = "y";
|
|
SMP = "y";
|
|
# this is disabled for the moment because it relies on a GCC
|
|
# plugin that requires gmp.h to build, and I can't see right now
|
|
# how to confgure it to find gmp
|
|
STACKPROTECTOR_PER_TASK = "n";
|
|
NR_CPUS = "4";
|
|
VFP = "y";
|
|
NEON= "y";
|
|
|
|
# WARNING: unmet direct dependencies detected for ARCH_WANT_LIBATA_LEDS
|
|
ATA = "y";
|
|
|
|
PSTORE = "y";
|
|
PSTORE_RAM = "y";
|
|
PSTORE_CONSOLE = "y";
|
|
PSTORE_DEFLATE_COMPRESS = "n";
|
|
|
|
BLOCK = "y";
|
|
MMC="y";
|
|
PWRSEQ_EMMC="y"; # ???
|
|
PWRSEQ_SIMPLE="y"; # ???
|
|
MMC_BLOCK="y";
|
|
|
|
MMC_SDHCI= "y";
|
|
MMC_SDHCI_PLTFM= "y";
|
|
MMC_SDHCI_PXAV3= "y";
|
|
MMC_MVSDIO= "y";
|
|
|
|
SERIAL_8250 = "y";
|
|
SERIAL_8250_CONSOLE = "y";
|
|
SERIAL_OF_PLATFORM="y";
|
|
SERIAL_MVEBU_UART = "y";
|
|
SERIAL_MVEBU_CONSOLE = "y";
|
|
|
|
SERIAL_8250_DMA= "y";
|
|
SERIAL_8250_DW= "y";
|
|
SERIAL_8250_EXTENDED= "y";
|
|
SERIAL_8250_MANY_PORTS= "y";
|
|
SERIAL_8250_SHARE_IRQ= "y";
|
|
OF_ADDRESS= "y";
|
|
OF_MDIO= "y";
|
|
|
|
WATCHDOG = "y"; # watchdog is enabled by u-boot
|
|
ORION_WATCHDOG = "y"; # so is non-optional to keep feeding
|
|
|
|
MVEBU_DEVBUS = "y"; # "Device Bus controller ... flash devices such as NOR, NAND, SRAM, and FPGA"
|
|
MVMDIO = "y";
|
|
MVNETA = "y";
|
|
MVNETA_BM = "y";
|
|
MVNETA_BM_ENABLE = "y";
|
|
SRAM = "y"; # mmio-sram is "compatible" for bm_bppi reqd by BM
|
|
PHY_MVEBU_A38X_COMPHY = "y"; # for eth2
|
|
MARVELL_PHY = "y";
|
|
|
|
MVPP2 = "y";
|
|
MV_XOR = "y";
|
|
|
|
# there is NOR flash on this device, which is used for U-Boot
|
|
# and the rescue system (which we don't interfere with) but
|
|
# also for the U-Boot environment variables (which we might
|
|
# need to meddle with)
|
|
MTD_SPI_NOR = "y";
|
|
SPI = "y";
|
|
SPI_MASTER = "y";
|
|
SPI_ORION = "y";
|
|
|
|
NET_DSA = "y";
|
|
NET_DSA_MV88E6XXX = "y"; # depends on PTP_1588_CLOCK_OPTIONAL
|
|
};
|
|
conditionalConfig = {
|
|
USB = {
|
|
USB_XHCI_MVEBU = "y";
|
|
USB_XHCI_HCD = "y";
|
|
};
|
|
};
|
|
};
|
|
|
|
boot = {
|
|
commandLine = [
|
|
"console=ttyS0,115200"
|
|
"pcie_aspm=off" # ath9k pci incompatible with PCIe ASPM
|
|
];
|
|
};
|
|
filesystem =
|
|
let
|
|
inherit (pkgs.pseudofile) dir symlink;
|
|
firmware = pkgs.stdenv.mkDerivation {
|
|
name = "wlan-firmware";
|
|
phases = ["installPhase"];
|
|
installPhase = ''
|
|
mkdir $out
|
|
cp -r ${pkgs.linux-firmware}/lib/firmware/ath10k/QCA988X $out
|
|
'';
|
|
};
|
|
in dir {
|
|
lib = dir {
|
|
firmware = dir {
|
|
ath10k = symlink firmware;
|
|
};
|
|
};
|
|
etc = dir {
|
|
"fw_env.config" =
|
|
let f = pkgs.writeText "fw_env.config" ''
|
|
/dev/mtd/by-name/u-boot-env 0x0 0x10000 0x10000
|
|
'';
|
|
in symlink f;
|
|
};
|
|
};
|
|
|
|
boot.tftp = {
|
|
loadAddress = lim.parseInt "0x1700000";
|
|
kernelFormat = "zimage";
|
|
compressRoot = true;
|
|
};
|
|
|
|
hardware = let
|
|
mac80211 = pkgs.mac80211.override {
|
|
drivers = ["ath9k_pci" "ath10k_pci"];
|
|
klibBuild = config.system.outputs.kernel.modulesupport;
|
|
};
|
|
in {
|
|
defaultOutput = "mtdimage";
|
|
loadAddress = lim.parseInt "0x00800000"; # "0x00008000";
|
|
entryPoint = lim.parseInt "0x00800000"; # "0x00008000";
|
|
rootDevice = "/dev/mmcblk0p1";
|
|
|
|
dts = {
|
|
src = "${config.system.outputs.kernel.modulesupport}/arch/arm/boot/dts/armada-385-turris-omnia.dts";
|
|
includes = [
|
|
"${config.system.outputs.kernel.modulesupport}/arch/arm/boot/dts/"
|
|
];
|
|
};
|
|
flash.eraseBlockSize = 65536; # only used for tftpboot
|
|
networkInterfaces =
|
|
let
|
|
inherit (config.system.service.network) link;
|
|
inherit (config.system.service) bridge;
|
|
in rec {
|
|
en70000 = link.build {
|
|
# in armada-38x.dtsi this is eth0.
|
|
# It's connected to port 5 of the 88E6176 switch
|
|
devpath = "/devices/platform/soc/soc:internal-regs/f1070000.ethernet";
|
|
# name is unambiguous but not very semantic
|
|
ifname = "en70000";
|
|
};
|
|
en30000 = link.build {
|
|
# in armada-38x.dtsi this is eth1
|
|
# It's connected to port 6 of the 88E6176 switch
|
|
devpath = "/devices/platform/soc/soc:internal-regs/f1030000.ethernet";
|
|
# name is unambiguous but not very semantic
|
|
ifname = "en30000";
|
|
};
|
|
# the default (from the dts? I'm guessing) behavour for
|
|
# lan ports on the switch is to attach them to
|
|
# en30000. It should be possible to do something better,
|
|
# per
|
|
# https://www.kernel.org/doc/html/latest/networking/dsa/configuration.html#affinity-of-user-ports-to-cpu-ports
|
|
# but apparently OpenWrt doesn't either so maybe it's more
|
|
# complicated than it looks.
|
|
|
|
wan = link.build {
|
|
# in armada-38x.dtsi this is eth2. It may be connected to
|
|
# an ethernet phy or to the SFP cage, depending on a gpio
|
|
devpath = "/devices/platform/soc/soc:internal-regs/f1034000.ethernet";
|
|
ifname = "wan";
|
|
};
|
|
|
|
lan0 = link.build { ifname = "lan0"; };
|
|
lan1 = link.build { ifname = "lan1"; };
|
|
lan2 = link.build { ifname = "lan2"; };
|
|
lan3 = link.build { ifname = "lan3"; };
|
|
lan4 = link.build { ifname = "lan4"; };
|
|
lan5 = link.build { ifname = "lan5"; };
|
|
lan = lan0; # maybe we should build a bridge?
|
|
|
|
wlan = link.build {
|
|
ifname = "wlan0";
|
|
dependencies = [ mac80211 ];
|
|
};
|
|
wlan5 = link.build {
|
|
ifname = "wlan1";
|
|
dependencies = [ mac80211 ];
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
}
|