liminix

commit 0436025e9147c3f93a05f8f5194a17a2af36cb6c
parent e8d5e4c78844d1bf6e6ea096b03e4b422265f0df
Author: Daniel Barlow <dan@telent.net>
Date:   Tue,  7 Mar 2023 21:33:01 +0000

example config for "wireless extender" role

Diffstat:
A
extneder.nix
 | 
193
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

1 file changed, 193 insertions(+), 0 deletions(-)
diff --git a/extneder.nix b/extneder.nix
@@ -0,0 +1,193 @@
+# This is not part of Liminix per se. This is a "scratchpad"
+# configuration for a device I'm testing with.
+#
+# Parts of it do do things that Liminix eventually needs to do, but
+# don't look in here for solutions - just for identifying the
+# problems.
+{
+  config,
+  pkgs,
+  lib,
+  ...
+}: let
+  secrets = import ./rotuer-secrets.nix;
+  inherit
+    (pkgs.liminix.networking)
+    address
+    udhcpc
+    hostapd
+    interface
+    route
+  ;
+  inherit (pkgs.liminix.services) oneshot longrun bundle target;
+  inherit (pkgs.pseudofile) dir symlink;
+  inherit (pkgs) dropbear ifwait serviceFns
+    ;
+in rec {
+  services.loopback = let
+    iface = interface {
+      type = "loopback";
+      device = "lo";
+    };
+  in
+    bundle {
+      name = "loopback";
+      contents = [
+        (address iface {
+          family = "inet4";
+          address = "127.0.0.1";
+          prefixLength = 8;
+        })
+        (address iface {
+          family = "inet6";
+          address = "::1";
+          prefixLength = 128;
+        })
+      ];
+    };
+
+  boot = {
+    tftp = {
+      enable = true;
+      serverip = "192.168.8.148";
+      ipaddr = "192.168.8.251";
+    };
+  };
+
+  imports = [
+    ./modules/wlan.nix
+    ./modules/tftpboot.nix
+    # ./modules/flashable.nix
+  ];
+
+  kernel = {
+    config = {
+      BRIDGE = "y";
+
+      NETFILTER_XT_MATCH_CONNTRACK = "y";
+
+      IP6_NF_IPTABLES = "y"; # do we still need these
+      IP_NF_IPTABLES = "y"; # if using nftables directly
+
+      # these are copied from rotuer and need review
+      IP_NF_NAT = "y";
+      IP_NF_TARGET_MASQUERADE = "y";
+      NETFILTER = "y";
+      NETFILTER_ADVANCED = "y";
+      NETFILTER_XTABLES = "y";
+
+      NFT_COMPAT = "y";
+      NFT_CT = "y";
+      NFT_LOG = "y";
+      NFT_MASQ = "y";
+      NFT_NAT = "y";
+      NFT_REJECT = "y";
+      NFT_REJECT_INET = "y";
+
+      NF_CONNTRACK = "y";
+      NF_NAT = "y";
+      NF_NAT_MASQUERADE = "y";
+      NF_TABLES = "y";
+      NF_TABLES_INET = "y";
+      NF_TABLES_IPV4 = "y";
+      NF_TABLES_IPV6 = "y";
+    };
+  };
+
+  services.hostap = hostapd (config.hardware.networkInterfaces.wlan) {
+    params = {
+      ssid = "liminix.dev";
+      country_code = "GB";
+      hw_mode = "g";
+      channel = "6";
+      wmm_enabled = 1;
+      ieee80211n = 1;
+      inherit (secrets) wpa_passphrase;
+      auth_algs = 1; # 1=wpa2, 2=wep, 3=both
+      wpa = 2; # 1=wpa, 2=wpa2, 3=both
+      wpa_key_mgmt = "WPA-PSK";
+      wpa_pairwise = "TKIP CCMP"; # auth for wpa (may not need this?)
+      rsn_pairwise = "CCMP"; # auth for wpa2
+    };
+  };
+
+  services.int = interface {
+    type = "bridge";
+    device = "int";
+  };
+  services.dhcpc = (udhcpc services.int {}) // {device = "int";};
+
+  services.bridge = let
+    primary = services.int;
+    addif = dev:
+      oneshot {
+        name = "add-${dev.device}-to-bridge";
+        up = "${ifwait}/bin/ifwait -v ${dev.device} running && ip link set dev ${dev.device} master ${primary.device}";
+        down = "ip link set dev ${dev} nomaster";
+        dependencies = [primary dev];
+      };
+  in
+    bundle {
+      name = "bridge-members";
+      contents = with config.hardware.networkInterfaces;
+        map addif [
+          lan
+          wlan
+        ];
+    };
+
+  services.sshd = longrun {
+    name = "sshd";
+    run = ''
+      mkdir -p /run/dropbear
+      ${dropbear}/bin/dropbear -E -P /run/dropbear.pid -R -F
+    '';
+  };
+
+  services.resolvconf = oneshot rec {
+    dependencies = [ services.dhcpc ];
+    name = "resolvconf";
+    # CHECK: https://udhcp.busybox.net/README.udhcpc says
+    # 'A list of DNS server' but doesn't say what separates the
+    # list members. Assuming it's a space or other IFS character
+    up = ''
+      . ${serviceFns}
+      ( in_outputs ${name}
+      for i in $(cat $(output ${services.dhcpc} dns)); do
+        echo "nameserver $i" > resolv.conf
+      done
+      )
+    '';
+    down = ''
+      rm -rf /run/service-state/${name}/
+    '';
+  };
+  filesystem = dir {
+    etc = dir {
+      "resolv.conf" = symlink "${services.resolvconf}/.outputs/resolv.conf";
+    };
+  };
+
+  services.defaultroute4 = route {
+    name = "defaultroute";
+    via = "$(output ${services.dhcpc} router)";
+    target = "default";
+    dependencies = [services.dhcpc];
+  };
+
+  services.default = target {
+    name = "default";
+    contents = with services; [
+      loopback
+      config.hardware.networkInterfaces.eth
+      config.hardware.networkInterfaces.wlan
+      int
+      bridge
+      hostap
+      defaultroute4
+      # resolvconf
+      sshd
+    ];
+  };
+  defaultProfile.packages = with pkgs; [nftables strace tcpdump swconfig];
+}