Daniel Barlow
e40170f7d5
pppoe test: update to expect change in root's PS1
2023-03-18 19:16:27 +00:00
Daniel Barlow
b85492c744
when flashing, only need to erase the space we're writing
2023-03-18 14:50:09 +00:00
Daniel Barlow
3c6ec354ce
move root's home directory to /home/root
...
/ is a bad choice of home directory
/home/root instead of /root is to make it easier to write
ssh keys to the right place
2023-03-18 14:46:50 +00:00
Daniel Barlow
e78d5212e6
move tftp config to base module
...
we need it for flashing from u-boot even when tftp booting
is not enabled
2023-03-18 14:45:51 +00:00
Daniel Barlow
ce05f4e44c
extract phram.mtd ramdisk support from tftpboot module
...
also rename tftproot output to tftpboot for consistency
2023-03-18 14:30:10 +00:00
Daniel Barlow
6e95932e0e
untested fix for unable to mount usb disk at boot
2023-03-18 14:30:10 +00:00
Daniel Barlow
9f9558c9e8
style: let inherit fetchpatch
2023-03-18 14:30:10 +00:00
Daniel Barlow
153cbec573
fix pathnames of modules
2023-03-18 14:30:10 +00:00
Daniel Barlow
3f11a3c708
gl-ar750 gpio support is required for USB to work
...
_legacy_ gpio sysfs interface is required by the openwrt
ath79 phy usb driver
2023-03-18 14:30:10 +00:00
Daniel Barlow
71ae8f8784
overthinking
2023-03-18 14:30:10 +00:00
Daniel Barlow
23b434b80e
add a logo
2023-03-18 14:30:10 +00:00
Daniel Barlow
a4e1dcedd3
redirect stderr
2023-03-10 23:39:53 +00:00
Daniel Barlow
53810e1f5f
tidy up a bit
2023-03-10 23:39:32 +00:00
Daniel Barlow
ad3f241af9
support mt300n-v2 flash
2023-03-10 23:24:05 +00:00
Daniel Barlow
3efa9e0af2
restore missing applets
2023-03-10 23:14:13 +00:00
Daniel Barlow
f2d1789ad7
add openssh authorized_keys
2023-03-10 23:13:32 +00:00
Daniel Barlow
2594239bbc
can't use builtins.fetchurl on hydra?
2023-03-10 18:51:07 +00:00
Daniel Barlow
be06363e4f
new example for rsync/usb backup server
2023-03-10 18:42:32 +00:00
Daniel Barlow
9f03276db8
move noise sources around in tests
...
wlan test shows output to make it easier to see when it went wrong
2023-03-10 18:41:43 +00:00
Daniel Barlow
225fc6fe51
configurable busybox
...
allows modules to add to the busybox applets and change config
2023-03-10 18:40:45 +00:00
Daniel Barlow
8b2fcb5336
move non-normative examples into a subdirectory
2023-03-10 14:38:13 +00:00
Daniel Barlow
43f1fb230b
remove unrecoginsed earlyprintk param from kernel commandline
2023-03-10 00:50:28 +00:00
Daniel Barlow
d83bcc643e
add wifi firmware, move things around in ram
...
* at the base address we were using, the filesystem was getting
corrupted presumably because the kernel unpacked into it
* leave a little more space between compressed kernel and
squashfs. this is probably ineffective but also harmless
2023-03-10 00:48:47 +00:00
Daniel Barlow
f50b0627a2
gl-mt300n-v2: initialize switch & define networkInterfaces
...
It booted and mounted rootfs the first time I tried, which
was nice. Wireless doesn't work yet, it needs firmware
2023-03-09 19:30:57 +00:00
Daniel Barlow
91c0147919
set hostname before dhcp client runs
2023-03-08 22:11:59 +00:00
Daniel Barlow
2318c54037
blah
2023-03-08 21:00:12 +00:00
Daniel Barlow
95e14b5c05
extract secrets for extneder
2023-03-08 20:37:08 +00:00
Daniel Barlow
f36d8ef1d0
make mt300a flash-ready
2023-03-08 20:35:41 +00:00
Daniel Barlow
85b5edc39d
vlan interfaces depend on parent
2023-03-08 20:34:39 +00:00
Daniel Barlow
d290965711
shuffle kernel config for gl-mt300a
2023-03-07 22:49:33 +00:00
Daniel Barlow
03a6d62d49
new todo list
2023-03-07 22:36:48 +00:00
Daniel Barlow
bfbbe00d58
describe role of flash config
2023-03-07 22:36:48 +00:00
Daniel Barlow
8611dab602
unadvisable use of cat
2023-03-07 22:36:48 +00:00
Daniel Barlow
fec77a44b5
DRY loopback interface, it's the same everywhere
2023-03-07 22:36:48 +00:00
Daniel Barlow
0436025e91
example config for "wireless extender" role
2023-03-07 21:33:01 +00:00
Daniel Barlow
e8d5e4c788
move regulatory.db to wlan module
2023-03-07 21:32:21 +00:00
Daniel Barlow
b65a405a43
wibble
2023-03-07 19:11:46 +00:00
Daniel Barlow
70f8f5ecfd
remove hostapd debugging flag
2023-03-07 19:11:25 +00:00
Daniel Barlow
c046c39613
wlan support for mt300a
2023-03-07 19:11:12 +00:00
Daniel Barlow
e86e9430fc
vlans and mt300a wired network interfaces
2023-03-07 19:10:12 +00:00
Daniel Barlow
06687a819a
udhcpc notify when ready
2023-03-07 19:06:40 +00:00
Daniel Barlow
f9f9720ba7
${!foo} doesn't work in ash, switch to printenv
2023-03-07 19:05:58 +00:00
Daniel Barlow
4596bc3e88
build smaller versions of hostap and nftables
2023-03-06 17:49:59 +00:00
Daniel Barlow
aa5f8c07e6
don't patch s6 if new enough not to need it
2023-03-06 17:49:11 +00:00
Daniel Barlow
1565a8414d
remove inadvertant references to bash
2023-03-06 17:48:31 +00:00
Daniel Barlow
83e56a3a90
add swconfig package
2023-03-05 22:32:56 +00:00
Daniel Barlow
2787e6a230
reformat qprint substitutions
2023-03-05 21:33:51 +00:00
Daniel Barlow
a8cb872859
add service name to log lines
2023-03-04 23:08:25 +00:00
Daniel Barlow
5427456c21
rename notificationFd to notification-fd
...
it's perfectly valid syntax and consistent with the s6 spelling
2023-03-04 21:19:30 +00:00
Daniel Barlow
08bed15cf8
ssh service
...
- dropbear
- generate host keys on first use
- mount /dev/pts
It's not ideal having the host key disappear when the device is
reboot, but without persistent storage the alternative is generating
it at build time. Deferring this problem to another time
2023-03-04 12:10:06 +00:00
Daniel Barlow